Tag Archives: hardware
M2D18 Synology on Oracle VM 3.4.6.2
I wanted a way to add more NVMe drives to my server, and this seemed like a good idea.
I deployed two of these. Perfect by design. It’s a 24-lane PCI switch from IDT/Renasas, part number 89HPES24T6G2, plus a Marvel 88S9235 2-port SATA controller on the back. It is an 8-lane physical and logical connection at up to PCIe 2.0 speeds. Each M.2 slot supports any M-key SSD as long as they are both SATA or both NVMe. In NVMe mode, that’s a 4-lane PCIe slot. In total, it uses 16 of the 24 lanes, meaning the PCIe switch is never overloaded.
Oracle Virtual Machine Server 3.4.6-2105 with Linux kernel 4.1.12-124.21.1.el6uek.x86_64 automatically supports this switch, somewhat. When this card was serving up two NVMe drives, I could see them, but as soon as I wrote to either of them, it went into I/O aborts, timeouts, and hung until powered off. Two of these cards, 4 total NVMe drives. Not a bad device issue. I’m using OVM Server 3.4.6.2. Pulling the NVMe drives loose, and plugging them into single-drive risers, they work fine, so it’s specifically related to PCIe switching. There is an ASM card on the market that does the same thing, and maybe it works better. I have not tried it. There is a high-point raid card that some people have had success with.
Doing research, it seems there is still code work going on in Linux and FreeBSD for these kinds of errors. perhaps, some newer release would make this work, but that does not help for an enterprise Linux distribution today. There may be fixes in kernel 4.1.10 or 4.1.11.
Synology has specific hardware and specific OS builds to solve this problem, and some of it may be throttling the performance of each lane somewhat in the kernel, handling TRIM commands, handling reset commands, etc.
Maybe in OVM 4 and RHEL 8 we’ll see something stable, but today, I just can’t use these in a standalone Linux system.
That said, this is my limitation. The hardware is great. The heat sink assembly is well thought out. The screw kit is perfect, and it comes with both low and full profile backplates. It looks clean, well designed, and just overall a great piece of hardware. Also, the price is excellent for what it is. It’s very competitive. If you have a supported Synology storage array, or are on bleeding edge Linux, or are using SATA M-Key drives, then this could be a great option for you.
┌────────────────────────────────────────────────────────────────────┐ │ • MobaXterm Professional v11.1 • │ │ (X server, SSH client and network tools) │ │ │ │ ➤ Your computer drives are accessible through the /drives path │ │ ➤ Your DISPLAY is set to 192.168.1.100:0.0 │ │ ➤ When using SSH, your remote DISPLAY is automatically forwarded │ │ ➤ Each command status is specified by a special symbol (✔ or ✘) │ │ │ │ Registered to Josh Davis (1 user) │ └────────────────────────────────────────────────────────────────────┘ [2020-03-07 14:19.34] ~ [jdavis.JoshD6860] ➤ ssh vhost0 -l root Warning: Permanently added 'vhost0' (RSA) to the list of known hosts. root@vhost0's password: X11 forwarding request failed on channel 0 Last login: Sat Mar 7 13:40:51 2020 Warning: making manual modifications in the management domain might cause inconsistencies between Oracle VM Manager and the server. [root@vhost0 ~]# cat /etc/redhat-release Oracle VM server release 3.4.6 [root@vhost0 ~]# rpm -qa | grep kexec-tools kexec-tools-ovs-2.0.16-100.3.el6.x86_64 [root@vhost0 ~]# vi /etc/default/grub [root@vhost0 ~]# grub2-mkconfig -o /boot/grub2/grub.cfg Generating grub configuration file ... Found linux image: /boot/vmlinuz-4.1.12-124.21.1.el6uek.x86_64 Found initrd image: /boot/initramfs-4.1.12-124.21.1.el6uek.x86_64.img done [root@vhost0 ~]# vgs [root@vhost0 ~]# ll /dev/mapper total 0 crw-rw---- 1 root root 10, 236 Mar 7 14:18 control [root@vhost0 ~]# chkconfig kdump on [root@vhost0 ~]# service kdump restart Stopping kdump: [ OK ] Starting kdump: [FAILED] [root@vhost0 ~]# service kdump restart Stopping kdump: [ OK ] Starting kdump: [FAILED] [root@vhost0 ~]# cat /etc/kdump kdump-adv-conf/ kdump.conf [root@vhost0 ~]# cat /etc/kdump.conf # Configures where to put the kdump /proc/vmcore files # # This file contains a series of commands to perform (in order) when a # kernel crash has happened and the kdump kernel has been loaded. Directives in # this file are only applicable to the kdump initramfs, and have no effect if # the root filesystem is mounted and the normal init scripts are processed # # Currently only one dump target and path may be configured at once # if the configured dump target fails, the default action will be preformed # the default action may be configured with the default directive below. If the # configured dump target succedes # # Basics commands supported are: # path - Append path to the filesystem device which you are # dumping to. Ignored for raw device dumps. # If unset, will default to /var/crash. # # core_collector# - This allows you to specify the command to copy # the vmcore. You could use the dump filtering # program makedumpfile, the default one, to retrieve # your core, which on some arches can drastically # reduce core file size. See /sbin/makedumpfile --help # for a list of options. Note that the -i and -g # options are not needed here, as the initrd will # automatically be populated with a config file # appropriate for the running kernel. # For ssh dump, scp should be used instead of cp. # # raw - Will write /proc/vmcore into raw . # # nfs - Will mount fs and copy /proc/vmcore to # //%HOST-%DATE/, supports DNS. # # nfs4 - Will use NFSv4 instead of NFSv3 # # net - This is a deprecated option to transfer vmcore over nfs. # Use "nfs" option instead. # # ssh - Will copy /proc/vmcore to # :/%HOST-%DATE/ via SSH, # supports DNS. If makedumpfile is the core_collector, # it is piped to an "ssh" shell, otherwise use the specified # core_collector like scp. # NOTE: make sure user has necessary write # permissions on server # # net - This is a deprecated option to transfer vmcore over ssh. # Use "ssh" option instead. # # - Will mount -t /mnt and copy # /proc/vmcore to /mnt//127.0.0.1-%DATE/. # NOTE: can be a device node, label or uuid. # # link_delay # - Some network cards take a long time to initialize, and # some spanning tree enabled networks do not transmit # user traffic for long periods after a link state # changes. This optional parameter defines a wait # period after a link is activated in which the # initramfs will wait before attempting to transmit # user data. # # kdump_post # - This directive allows you to run a specified # executable just after the memory dump process # terminates. The exit status from the dump process # is fed to the kdump_post executable, which can be # used to trigger different actions for success or # failure. # # kdump_pre # - works just like the kdump_post directive, but instead # of running after the dump process, runs immediately # before. Exit status of this binary is interpreted # as follows: # 0 - continue with dump process as usual # non 0 - reboot/halt the system # # extra_bins # - This directive allows you to specify additional # binaries or shell scripts you'd like to include in # your kdump initrd. Generally only useful in # conjunction with a kdump_post binary or script that # relies on other binaries or scripts. # # extra_modules # - This directive allows you to specify extra kernel # modules that you want to be loaded in the kdump # initrd, typically used to set up access to # non-boot-path dump targets that might otherwise # not be accessible in the kdump environment. Multiple # modules can be listed, separated by a space, and any # dependent modules will automatically be included. # # default # - Action to preform in case dumping to intended target # fails. If no default action is specified, "reboot" # is assumed default. # # reboot: If the default action is reboot simply reboot # the system and loose the core that you are # trying to retrieve. # halt: If the default action is halt, then simply # halt the system after attempting to capture # a vmcore, regardless of success or failure. # poweroff: The system will be powered down # shell: If the default action is shell, then drop to # an hush session inside the initramfs from # where you can try to record the core manually. # Exiting this shell reboots the system. # mount_root_run_init: Mount root filesystem and run init. Kdump # initscript will try to save dump to root # filesystem in /var/crash dir. This will # likely require a lot more memory to # be reserved for kdump kernel. # # debug_mem_level <0-3> # - Turns on debug/verbose output of kdump scripts # regarding free/used memory at various points of # execution. Higher level means more debugging output. # 0 - no output # 1 - partial /proc/meminfo # 2 - /proc/meminfo # 3 - /proc/meminfo + /proc/slabinfo #raw /dev/sda5 #ext4 /dev/sda3 #ext4 LABEL=/boot #ext4 UUID=03138356-5e61-4ab3-b58e-27507ac41937 #note: mkfs.ocfs2 -Mlocal /dev/sda3 #ocfs2 /dev/sda3 #extra_modules ocfs2 #net my.server.com:/export/tmp #net user@my.server.com path /var/crash core_collector makedumpfile -Xcd 1 --message-level 1 --work-dir=/tmp #core_collector scp #core_collector cp --sparse=always #extra_bins /bin/cp #link_delay 60 #kdump_post /var/crash/scripts/kdump-post.sh #extra_bins /usr/bin/lftp #disk_timeout 30 #extra_modules gfs2 #options modulename options #default shell #debug_mem_level 0 #force_rebuild 1 #sshkey /root/.ssh/kdump_id_rsa blacklist xen-blkback xen-blkfront xen-evtchn xenfs xen-gntalloc xen-gntdev blacklist xen-netback xen-netfront xen-pciback xen-privcmd xen_wdt # RDMA services require 2GB which is not the default size of kdump blacklist mlx4_core mlx4_ib mlx5_core mlx5_ib [root@vhost0 ~]# cat /etc/sysconfig/kdump # Kernel Version string for the -kdump kernel, such as 2.6.13-1544.FC5kdump # If no version is specified, then the init script will try to find a # kdump kernel with the same version number as the running kernel. KDUMP_KERNELVER="" # The kdump commandline is the command line that needs to be passed off to # the kdump kernel. This will likely match the contents of the grub kernel # line. For example: # KDUMP_COMMANDLINE="ro root=LABEL=/" # If a command line is not specified, the default will be taken from # /proc/cmdline KDUMP_COMMANDLINE="" # This variable lets us append arguments to the current kdump commandline # As taken from either KDUMP_COMMANDLINE above, or from /proc/cmdline KDUMP_COMMANDLINE_APPEND="irqpoll maxcpus=1 nr_cpus=1 reset_devices cgroup_disable=memory mce=off selinux=0 nox2apic" # Any additional /sbin/mkdumprd arguments required. MKDUMPRD_ARGS="--allow-missing" # Any additional kexec arguments required. In most situations, this should # be left empty # # Example: # KEXEC_ARGS="--elf32-core-headers" KEXEC_ARGS="" #Where to find the boot image KDUMP_BOOTDIR="/boot" #What is the image type used for kdump KDUMP_IMG="vmlinuz" #What is the images extension. Relocatable kernels don't have one KDUMP_IMG_EXT="" [root@vhost0 ~]# grub2-mkconfig -o /boot/grub2/grub.cfg Generating grub configuration file ... Found linux image: /boot/vmlinuz-4.1.12-124.21.1.el6uek.x86_64 Found initrd image: /boot/initramfs-4.1.12-124.21.1.el6uek.x86_64.img done [root@vhost0 ~]# l /var/crash -bash: l: command not found [root@vhost0 ~]# ll /var/crash total 0 [root@vhost0 ~]# xl dmesg|grep -i crashkernel [root@vhost0 ~]# reboot Broadcast message from root@vhost0.omnitech.net (/dev/pts/0) at 14:41 ... The system is going down for reboot NOW! [root@vhost0 ~]# Connection to vhost0 closed by remote host. Connection to vhost0 closed. ✘ ────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────── [2020-03-07 14:42.01] ~ [jdavis.JoshD6860] ➤ ssh vhost0 -l root ssh: connect to host vhost0 port 22: Connection timed out ✘ ────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────── [2020-03-07 14:43.21] ~ [jdavis.JoshD6860] ➤ ssh vhost0 -l root X11 forwarding request failed on channel 0 Last login: Sat Mar 7 14:19:44 2020 from joshd6860.omnitech.int Warning: making manual modifications in the management domain might cause inconsistencies between Oracle VM Manager and the server. [root@vhost0 ~]# xl dmesg|grep -i crashkernel (XEN) Command line: placeholder dom0_mem=max:1272M allowsuperpage dom0_vcpus_pin dom0_max_vcpus=20 crashkernel=512M@64M [root@vhost0 ~]# xl dmesg|grep -i kdump (XEN) Kdump: 64MB-576MB overlaps with 0xede00000(3806MB). Adjusting. (XEN) Kdump: 512MB (524288kB) at 0xcde00000->0xede00000 [root@vhost0 ~]# kexec --print-ckr-size 536870912 [root@vhost0 ~]# service kdump status Kdump is operational [root@vhost0 ~]# rpm -qa | grep el basesystem-10.0-4.0.1.el6.noarch iso-codes-3.16-2.el6.noarch libX11-common-1.6.4-3.el6.noarch glibc-2.12-1.212.0.1.el6.x86_64 libcap-2.16-5.5.el6.x86_64 libxml2-2.7.6-21.0.1.el6_8.1.x86_64 popt-1.13-7.el6.x86_64 nspr-4.19.0-1.el6.x86_64 db4-ovs-4.7.25-20.0.1.el6_7.x86_64 sed-4.2.1-10.el6.x86_64 libjpeg-turbo-1.2.1-3.el6_5.x86_64 libcap-ng-0.6.4-3.el6_0.1.x86_64 libibumad-1.3.10.2-1.0.1.el6.x86_64 pcre-7.8-7.el6.x86_64 libaio-0.3.107-10.el6.x86_64 which-2.19-6.el6.x86_64 yajl-1.0.7-3.el6.x86_64 cyrus-sasl-lib-2.1.23-15.el6_6.2.x86_64 diffutils-2.8.1-28.el6.x86_64 gdbm-1.8.0-39.el6.x86_64 perl-Module-Pluggable-3.90-144.el6.x86_64 gnutls-2.12.23-21.el6.x86_64 psmisc-22.6-24.el6.x86_64 bridge-utils-1.2-10.el6.x86_64 keyutils-libs-1.4-5.0.1.el6.x86_64 lcms-libs-1.19-1.el6.x86_64 p11-kit-0.18.5-2.el6_5.2.x86_64 dbus-glib-0.86-6.el6_4.x86_64 libibumad-devel-1.3.10.2-1.0.1.el6.x86_64 vim-minimal-7.4.629-5.el6_8.1.x86_64 unzip-6.0-5.el6.x86_64 ed-1.1-3.3.el6.x86_64 libfontenc-1.1.2-3.el6.x86_64 less-436-13.el6.x86_64 cracklib-dicts-2.8.16-4.el6.x86_64 module-init-tools-3.9-26.0.1.el6.x86_64 alsa-lib-1.1.0-4.el6.x86_64 ethtool-3.5-6.el6.x86_64 openjpeg-libs-1.3-16.el6_8.x86_64 cvs-1.11.23-16.el6.x86_64 nss-3.36.0-9.0.1.el6_10.x86_64 librbd1-0.80.9-0.0.5.el6.x86_64 libXfont-1.5.1-2.el6.x86_64 libibmad-devel-1.3.12-1.0.2.el6.x86_64 infiniband-diags-1.6.5-1.0.3.el6.x86_64 p11-kit-trust-0.18.5-2.el6_5.2.x86_64 glusterfs-libs-3.12.2-18.el6.x86_64 fipscheck-1.2.0-7.el6.x86_64 wget-1.12-10.el6.x86_64 mysql-libs-5.1.73-8.0.1.el6_8.x86_64 keyutils-1.4-5.0.1.el6.x86_64 gnutls-utils-2.12.23-21.el6.x86_64 lzop-1.02-0.9.rc1.el6.x86_64 pinentry-0.7.6-8.el6.x86_64 db4-ovs-utils-4.7.25-20.0.1.el6_7.x86_64 rpm-4.8.0-55.el6.x86_64 libuser-0.56.13-8.el6_7.x86_64 net-snmp-utils-5.5-60.0.1.el6.x86_64 sudo-1.8.6p3-29.el6_9.x86_64 libnih-1.0.1-7.el6.x86_64 e2fsprogs-1.42.8-1.0.3.el6.x86_64 libconfig-1.3.2-1.1.el6.x86_64 iperf-2.0.5-1.el6.x86_64 mcelog-128-1.c83713fd.el6.x86_64 glibc-headers-2.12-1.212.0.1.el6.x86_64 perl-devel-5.10.1-144.el6.x86_64 lldpad-libs-0.9.46-10.el6_8.x86_64 ustr-1.0.4-9.1.el6.x86_64 rpcbind-0.2.0-13.el6_9.1.x86_64 ConsoleKit-libs-0.4.1-6.el6.x86_64 MAKEDEV-3.24-6.el6.x86_64 libevent-1.4.13-4.el6.x86_64 pax-3.4-10.1.el6.x86_64 libsysfs-2.1.0-7.el6.x86_64 libXau-1.0.6-4.el6.x86_64 libXrender-0.9.10-1.el6.x86_64 libXcursor-1.1.14-2.1.el6.x86_64 libXinerama-1.1.3-2.1.el6.x86_64 ghostscript-8.70-23.el6_9.2.x86_64 libXv-1.0.11-1.el6.x86_64 libffi-3.0.5-3.2.el6.x86_64 rpm-python-4.8.0-55.el6.x86_64 python-pycurl-7.19.0-9.el6.x86_64 PyYAML-3.10-3.1.el6.x86_64 setools-libs-python-3.3.7-4.el6.x86_64 vmpinfo3-sosreport-1.0.0-17.el6.5.noarch python-configobj-4.6.0-3.el6.noarch python-markdown-2.0.1-4.el6.noarch python-setuptools-0.6.10-3.el6.noarch python-backports-1.0-5.el6.x86_64 python-boto-2.34.0-6.el6.noarch slang-2.2.1-1.el6.x86_64 libvisual-0.4.0-10.el6.x86_64 qemu-img-0.12.1.2-2.506.el6_10.1.x86_64 enterprise-linux-ovs-6-7.844.6.el6.x86_64 libdrm-2.4.65-2.el6.x86_64 initscripts-9.03.58-1.0.1.el6_9.2.x86_64 mesa-dri-drivers-11.0.7-4.el6.x86_64 grub2-tools-2.02-0.44.0.21.el6.x86_64 cups-1.4.2-78.el6_9.x86_64 nfs-utils-lib-1.1.5-13.el6.x86_64 device-mapper-multipath-libs-0.4.9-100.0.3.el6_9.1.x86_64 ovs-snmp-1.0-4.el6.x86_64 lvm2-libs-2.02.143-12.el6_9.1.x86_64 foomatic-db-ppds-4.0-8.20091126.el6.noarch grub2-efi-modules-2.02-0.44.0.21.el6.x86_64 mdadm-3.3.4-8.el6.x86_64 ntp-4.2.6p5-12.0.1.el6_9.1.x86_64 grub2-2.02-0.44.0.21.el6.x86_64 librdmacm-1.0.20-1.0.6.el6.x86_64 librdmacm-devel-1.0.20-1.0.6.el6.x86_64 xen-4.4.4-222.el6.x86_64 libmlx4-1.0.6-1.0.4.el6.x86_64 dracut-fips-004-409.0.7.el6_8.2.noarch network-scripts-vxlan-3.4.2-2.el6.noarch dnsmasq-2.48-18.el6_9.x86_64 crontabs-1.10-33.el6.noarch sysstat-9.0.4-33.el6.x86_64 redhat-lsb-graphics-4.0-7.0.2.el6.x86_64 ocaml-runtime-3.11.2-5.el6.x86_64 libvirt-daemon-1.2.14-19.1.el6.x86_64 libvirt-daemon-driver-storage-1.2.14-19.1.el6.x86_64 libvirt-daemon-driver-interface-1.2.14-19.1.el6.x86_64 libvirt-1.2.14-19.1.el6.x86_64 ovmport-1.0-8.el6.x86_64 busybox-1.15.1-21.el6_6.x86_64 osc-oracle-ocfs2-0.1.0-47.el6.5.noarch openssh-clients-5.3p1-123.el6_9.x86_64 usermode-1.102-3.el6.x86_64 sos-3.2-54.0.1.el6_9.1.noarch pyOpenSSL-0.13.1-2.el6.x86_64 pygobject2-2.20.0-5.el6.x86_64 pciutils-3.1.10-4.el6.x86_64 vbox-img-1.0-9.el6.1.x86_64 hdparm-9.43-4.el6.x86_64 nss-softokn-freebl-3.14.3-23.3.0.1.el6_8.i686 libgcc-4.4.7-18.el6.x86_64 filesystem-2.4.30-3.el6.x86_64 foomatic-db-filesystem-4.0-8.20091126.el6.noarch xml-common-0.6.3-33.el6.noarch poppler-data-0.4.0-1.el6.noarch ncurses-base-5.7-4.20090207.el6.x86_64 tzdata-2018g-1.el6.noarch glibc-common-2.12-1.212.0.1.el6.x86_64 ncurses-libs-5.7-4.20090207.el6.x86_64 libattr-2.4.44-7.el6.x86_64 zlib-1.2.3-29.el6.x86_64 info-4.13a-8.el6.x86_64 audit-libs-2.4.5-6.el6.x86_64 libcom_err-1.42.8-1.0.3.el6.x86_64 dbus-libs-1.2.24-8.0.1.el6_6.x86_64 bzip2-libs-1.0.5-7.el6_0.x86_64 libacl-2.2.49-7.el6_9.1.x86_64 freetype-2.3.11-17.el6.x86_64 libsepol-2.0.41-4.el6.x86_64 chkconfig-1.3.49.5-1.el6.x86_64 nss-util-3.36.0-1.el6.x86_64 libgcrypt-1.4.5-12.el6_8.x86_64 expat-2.0.1-13.el6_8.x86_64 elfutils-libelf-0.164-2.el6.x86_64 libudev-147-2.73.0.1.el6_8.2.x86_64 xz-libs-4.999.9-0.5.beta.20091007git.el6.x86_64 libnl-1.1.4-2.el6.x86_64 findutils-4.4.2-9.el6.x86_64 grep-2.20-6.el6.x86_64 sqlite-3.6.20-1.el6_7.2.x86_64 libICE-1.0.6-1.el6.x86_64 bzip2-1.0.5-7.el6_0.x86_64 file-libs-5.04-30.el6.x86_64 numactl-2.0.9-2.el6.x86_64 xz-4.999.9-0.5.beta.20091007git.el6.x86_64 procps-3.2.8-45.0.1.el6_9.3.x86_64 lua-5.1.4-4.1.el6.x86_64 cpio-2.10-13.el6.x86_64 pkgconfig-0.23-9.1.el6.x86_64 dmidecode-2.12-7.el6.x86_64 perl-Pod-Escapes-1.04-144.el6.x86_64 perl-version-0.77-144.el6.x86_64 perl-Pod-Simple-3.13-144.el6.x86_64 libtasn1-2.3-6.el6_5.x86_64 opensm-libs-3.3.19-1.0.2.el6.x86_64 libtiff-3.9.4-21.el6_8.x86_64 e2fsprogs-libs-1.42.8-1.0.3.el6.x86_64 make-3.81-23.el6.x86_64 pciutils-libs-3.1.10-4.el6.x86_64 sysvinit-tools-2.87-6.dsf.el6.x86_64 krb5-libs-1.10.3-65.el6.x86_64 lm_sensors-libs-3.1.1-17.el6.x86_64 libogg-1.1.4-2.1.el6.x86_64 libtirpc-0.2.1-13.el6_9.x86_64 gamin-0.1.10-9.el6.x86_64 shared-mime-info-0.70-6.el6.x86_64 atk-1.30.0-1.el6.x86_64 nss-softokn-3.14.3-23.3.0.1.el6_8.x86_64 elfutils-libs-0.164-2.el6.x86_64 jasper-libs-1.900.1-21.el6_9.x86_64 patch-2.6-8.el6_9.x86_64 libselinux-utils-2.0.94-7.el6.x86_64 bc-1.06.95-1.el6.x86_64 cups-libs-1.4.2-78.el6_9.x86_64 gmp-4.3.1-12.el6.x86_64 boost-system-1.41.0-28.el6.x86_64 libibacl-1.0-6.el6.x86_64 groff-1.18.1.4-21.el6.x86_64 coreutils-libs-8.4-46.0.1.el6.x86_64 cracklib-2.8.16-4.el6.x86_64 coreutils-8.4-46.0.1.el6.x86_64 fontconfig-2.8.0-5.el6.x86_64 hwdata-0.233-18.1.el6.noarch oracle-logos-60.0.14-1.0.5.el6.noarch plymouth-scripts-0.8.3-29.0.1.el6.x86_64 lsscsi-0.23-3.el6.x86_64 pth-2.0.7-9.3.el6.x86_64 pixman-0.32.8-1.el6.x86_64 poppler-0.12.4-12.el6_9.x86_64 libhbalinux-1.0.17-2.el6.x86_64 logrotate-3.7.8-28.el6.x86_64 hicolor-icon-theme-0.11-1.1.el6.noarch nss-sysinit-3.36.0-9.0.1.el6_10.x86_64 librados2-0.80.9-0.0.5.el6.x86_64 hmaccalc-0.9.12-2.el6.x86_64 redhat-rpm-config-9.0.3-51.0.1.el6.noarch xorg-x11-font-utils-7.2-11.el6.x86_64 ghostscript-fonts-5.50-23.2.el6.noarch eggdbus-0.6-3.el6.x86_64 grubby-7.0.15-7.0.5.el6.x86_64 gstreamer-tools-0.10.29-1.0.1.el6.x86_64 libgudev1-147-2.73.0.1.el6_8.2.x86_64 ca-certificates-2017.2.14-65.0.1.el6_9.noarch qt-4.6.2-28.el6_5.x86_64 mokutil-0.9-2.0.6.2.el6.x86_64 fipscheck-lib-1.2.0-7.el6.x86_64 shim-0.9-2.0.6.2.el6.x86_64 qt-sqlite-4.6.2-28.el6_5.x86_64 socat-1.7.3.1-1.el6.2.x86_64 bind-utils-9.8.2-0.68.rc1.el6_10.1.x86_64 libtheora-1.1.0-2.el6.x86_64 lm_sensors-3.1.1-17.el6.x86_64 efibootmgr-0.5.4-15.el6.x86_64 tmpwatch-2.9.16-6.el6.x86_64 cpuid-20160814-1.el6.x86_64 gdbm-devel-1.8.0-39.el6.x86_64 device-mapper-persistent-data-0.6.2-0.1.rc7.el6.x86_64 portreserve-0.0.4-11.el6.x86_64 checkpolicy-2.0.22-1.el6.x86_64 netcf-libs-0.2.4-4.el6.x86_64 libcurl-7.19.7-53.el6_9.x86_64 curl-7.19.7-53.el6_9.x86_64 openldap-2.4.40-16.el6.x86_64 pam_ldap-185-11.el6.x86_64 passwd-0.77-7.el6.x86_64 net-snmp-libs-5.5-60.0.1.el6.x86_64 openscap-scanner-1.2.13-2.0.1.el6.x86_64 gpgme-1.1.8-3.el6.x86_64 openldap-clients-2.4.40-16.el6.x86_64 rsync-3.0.6-12.el6.x86_64 upstart-0.6.5-16.el6.x86_64 libss-1.42.8-1.0.3.el6.x86_64 time-1.7-38.el6.x86_64 libgomp-4.4.7-18.el6.x86_64 libicu-4.2.1-14.el6.x86_64 snappy-1.1.0-1.el6.x86_64 db4-ovs-cxx-4.7.25-20.0.1.el6_7.x86_64 mesa-private-llvm-3.6.2-1.el6.x86_64 mstflint-4.8.0-2.0.2.el6.x86_64 attr-2.4.44-7.el6.x86_64 strace-4.8-11.el6.x86_64 dash-0.5.5.1-4.el6.x86_64 glibc-devel-2.12-1.212.0.1.el6.x86_64 perl-ExtUtils-MakeMaker-6.55-144.el6.x86_64 perl-Test-Harness-3.17-144.el6.x86_64 cdparanoia-libs-10.2-5.1.el6.x86_64 libtool-ltdl-2.2.6-15.5.el6.x86_64 mingetty-1.08-5.el6.x86_64 libsemanage-2.0.43-5.1.el6.x86_64 dbus-1.2.24-8.0.1.el6_6.x86_64 nscd-2.12-1.212.0.1.el6.x86_64 screen-4.0.3-19.el6.x86_64 ConsoleKit-0.4.1-6.el6.x86_64 tcpdump-4.0.0-11.20090921gitdf3cb4.2.el6.x86_64 glusterfs-3.12.2-18.el6.x86_64 libnl3-3.2.21-8.el6.x86_64 traceroute-2.0.14-2.el6.x86_64 plymouth-core-libs-0.8.3-29.0.1.el6.x86_64 sg3_utils-libs-1.28-12.el6.x86_64 osc-plugin-manager-1.2.9-43.el6.11.noarch SDL-1.2.14-7.el6_7.1.x86_64 sgpio-1.2.0.10-5.el6.x86_64 libxcb-1.12-4.el6.x86_64 libXext-1.3.3-1.el6.x86_64 cairo-1.8.8-6.el6_6.x86_64 libXfixes-5.0.3-1.el6.x86_64 libXft-2.3.2-1.el6.x86_64 libXrandr-1.5.1-1.el6.x86_64 libXdamage-1.1.3-4.el6.x86_64 libXt-1.1.4-6.1.el6.x86_64 qt3-3.3.8b-30.el6.x86_64 libXxf86vm-1.1.3-2.1.el6.x86_64 libXcomposite-0.4.3-4.el6.x86_64 rds-tools-2.0.7-1.19.el6.x86_64 python-2.6.6-66.0.1.el6_8.x86_64 gettext-0.17-18.el6.x86_64 python-argparse-1.2.1-2.1.el6.noarch ipmitool-1.8.15-2.el6.x86_64 python-urlgrabber-3.9.1-11.0.1.el6.noarch python-crypto-2.0.1-22.el6.x86_64 yum-metadata-parser-1.1.2-16.el6.x86_64 libsemanage-python-2.0.43-5.1.el6.x86_64 m2crypto-0.20.2-9.el6.x86_64 rpm-build-4.8.0-55.el6.x86_64 python-prettytable-0.7.2-11.el6.noarch linux-firmware-20171128-56.git17e62881.0.2.el6.noarch audit-libs-python-2.4.5-6.el6.x86_64 python-jsonpointer-1.0-4.el6.noarch python-chardet-2.2.1-1.el6.noarch python-pygments-1.1.1-2.el6.noarch python-six-1.9.0-2.el6.noarch python-backports-ssl_match_hostname-3.4.0.2-5.el6.noarch python-requests-2.6.0-4.el6.noarch fakeroot-libs-1.12.2-22.2.el6.x86_64 ibutils-1.5.7-0.2.gbd7e502.0.3.el6.x86_64 newt-0.52.11-4.el6.x86_64 liboil-0.3.16-4.1.el6.x86_64 gstreamer-plugins-base-0.10.29-2.el6.x86_64 usbredir-0.6-7.el6.x86_64 kbd-misc-1.15-11.el6.noarch kernel-uek-firmware-4.1.12-124.21.1.el6uek.noarch policycoreutils-2.0.83-30.1.0.1.el6_8.x86_64 iproute-2.6.32-54.0.1.el6.x86_64 iputils-20071127-24.el6.x86_64 util-linux-ng-2.17.2-12.28.el6_9.1.x86_64 udev-147-2.73.0.1.el6_8.2.x86_64 mesa-dri1-drivers-7.11-8.el6.x86_64 device-mapper-libs-1.02.117-12.el6_9.1.x86_64 device-mapper-event-libs-1.02.117-12.el6_9.1.x86_64 kpartx-0.4.9-100.0.3.el6_9.1.x86_64 mesa-libGLU-11.0.7-4.el6.x86_64 iscsi-initiator-utils-6.2.0.873-27.0.3.el6_9.x86_64 nfs-utils-1.2.3-75.0.6.el6_9.x86_64 qt-x11-4.6.2-28.el6_5.x86_64 device-mapper-event-1.02.117-12.el6_9.1.x86_64 net-snmp-5.5-60.0.1.el6.x86_64 ebtables-2.0.9-6.el6.x86_64 device-mapper-multipath-0.4.9-100.0.3.el6_9.1.x86_64 dmraid-events-1.0.0.rc16-11.el6.x86_64 lvm2-2.02.143-12.el6_9.1.x86_64 numad-0.5-12.20150602git.el6.x86_64 foomatic-db-4.0-8.20091126.el6.noarch system-config-firewall-base-1.2.27-7.2.el6_6.noarch grub2-efi-2.02-0.44.0.21.el6.x86_64 cryptsetup-luks-libs-1.2.0-11.el6.x86_64 rdma-3.10-3.0.38.el6.noarch ntpdate-4.2.6p5-12.0.1.el6_9.1.x86_64 kbd-1.15-11.el6.x86_64 microcode_ctl-1.17-33.1.0.6.el6.x86_64 dracut-kernel-004-409.0.7.el6_8.2.noarch libibverbs-1.1.8-1.0.7.el6.x86_64 kernel-transition-2.6.32-0.0.0.3.el6.x86_64 libibverbs-devel-1.1.8-1.0.7.el6.x86_64 lldpad-0.9.46-10.el6_8.x86_64 openvswitch-2.3.1-1.0.1.el6.x86_64 qperf-0.4.9-2.0.2.el6.x86_64 librdmacm-utils-1.0.20-1.0.6.el6.x86_64 libibverbs-utils-1.1.8-1.0.7.el6.x86_64 oracle-ofed-release-1.0.0-41.el6.x86_64 rsyslog-5.8.10-10.0.1.el6_6.x86_64 dracut-network-004-409.0.7.el6_8.2.noarch nss-pam-ldapd-0.7.5-32.el6.x86_64 acpid-2.0.19-6.0.1.el6.x86_64 radvd-1.6-1.el6.x86_64 postfix-2.6.6-8.el6.x86_64 cronie-noanacron-1.4.4-16.el6_8.2.x86_64 redhat-lsb-core-4.0-7.0.2.el6.x86_64 cloud-init-0.7.5-8.0.1.el6_9.x86_64 redhat-lsb-printing-4.0-7.0.2.el6.x86_64 redhat-lsb-compat-4.0-7.0.2.el6.x86_64 ocfs2-tools-1.8.6-9.el6.x86_64 ovs-agent-3.4.6-8.el6.x86_64 libvirt-client-1.2.14-19.1.el6.x86_64 libvirt-daemon-driver-network-1.2.14-19.1.el6.x86_64 libvirt-daemon-driver-xen-1.2.14-19.1.el6.x86_64 libvirt-daemon-driver-secret-1.2.14-19.1.el6.x86_64 libvirt-daemon-driver-libxl-1.2.14-19.1.el6.x86_64 libvirt-daemon-config-nwfilter-1.2.14-19.1.el6.x86_64 libvirt-daemon-config-network-1.2.14-19.1.el6.x86_64 libvirt-daemon-xen-1.2.14-19.1.el6.x86_64 libvirt-python-1.2.14-1.el6.x86_64 fakeroot-1.12.2-22.2.el6.x86_64 openscap-utils-1.2.13-2.0.1.el6.x86_64 kexec-tools-ovs-2.0.16-100.3.el6.x86_64 devmon-1.0-170.el6.199.5.x86_64 cryptsetup-luks-1.2.0-11.el6.x86_64 openssh-server-5.3p1-123.el6_9.x86_64 prelink-0.4.6-3.1.el6_4.x86_64 authconfig-6.1.12-23.el6.x86_64 python-paramiko-1.7.5-5.el6_10.noarch pykickstart-1.74.22-1.el6.noarch PyXML-0.8.4-19.el6.x86_64 ovm-consoled-0.1-20.el6.3.noarch xenpvboot-0.1-9.el6.noarch openscap-python-1.2.13-2.0.1.el6.x86_64 osc-oracle-generic-1.1.0-106.el6.11.noarch tcp_wrappers-7.6-58.el6.x86_64 tftp-0.49-8.el6.x86_64 ovs-utils-1.1-1.el6.x86_64 vconfig-1.9-8.1.el6.x86_64 reflink-0.1.0-3.el6.x86_64 rootfiles-8.1-6.1.el6.noarch glibc-2.12-1.212.0.1.el6.i686 setup-2.8.14-23.el6.noarch mesa-dri-filesystem-11.0.7-4.el6.x86_64 kernel-headers-2.6.32-696.18.7.el6.x86_64 nss-softokn-freebl-3.14.3-23.3.0.1.el6_8.x86_64 bash-4.1.2-48.el6.x86_64 libstdc++-4.4.7-18.el6.x86_64 libuuid-2.17.2-12.28.el6_9.1.x86_64 readline-6.0-4.el6.x86_64 gawk-3.1.7-10.el6_7.3.x86_64 libselinux-2.0.94-7.el6.x86_64 libgpg-error-1.7-4.el6.x86_64 libpng-1.2.49-2.el6_7.x86_64 libblkid-2.17.2-12.28.el6_9.1.x86_64 net-tools-1.60-114.el6.x86_64 tcp_wrappers-libs-7.6-58.el6.x86_64 libSM-1.2.1-2.el6.x86_64 file-5.04-30.el6.x86_64 libxslt-1.1.26-2.0.2.el6_3.1.x86_64 libidn-1.18-2.el6.x86_64 lzo-2.03-3.1.el6_5.1.x86_64 perl-libs-5.10.1-144.el6.x86_64 perl-5.10.1-144.el6.x86_64 libibmad-1.3.12-1.0.2.el6.x86_64 binutils-2.20.51.0.2-5.47.el6_9.1.x86_64 libhbaapi-2.2.9-2.el6.x86_64 libgssglue-0.1-11.el6.x86_64 libmng-1.0.10-4.1.el6.x86_64 glib2-2.28.8-9.el6.x86_64 xz-lzma-compat-4.999.9-0.5.beta.20091007git.el6.x86_64 elfutils-0.164-2.el6.x86_64 tar-1.23-15.el6_8.x86_64 avahi-libs-0.6.25-17.el6.x86_64 boost-thread-1.41.0-28.el6.x86_64 ncurses-5.7-4.20090207.el6.x86_64 gzip-1.3.12-24.el6.x86_64 pam-1.1.1-24.0.1.el6.x86_64 libpciaccess-0.13.4-1.el6.x86_64 libedit-2.11-4.20080712cvs.1.el6.x86_64 libpcap-1.4.0-4.20130826git2dbcaa1.el6.x86_64 poppler-utils-0.12.4-12.el6_9.x86_64 audit-2.4.5-6.el6.x86_64 mailx-12.4-8.el6_6.x86_64 nss-tools-3.36.0-9.0.1.el6_10.x86_64 urw-fonts-2.4-11.el6.noarch nc-1.84-24.el6.x86_64 gstreamer-0.10.29-1.0.1.el6.x86_64 openssl-1.0.1e-57.0.1.el6.x86_64 libssh2-1.4.2-2.el6_7.1.x86_64 glusterfs-client-xlators-3.12.2-18.el6.x86_64 bind-libs-9.8.2-0.68.rc1.el6_10.1.x86_64 libvorbis-1.2.3-5.el6_9.1.x86_64 btrfs-progs-4.2.2-4.el6.x86_64 perl-CGI-3.51-144.el6.x86_64 setools-libs-3.3.7-4.el6.x86_64 augeas-libs-1.0.0-10.el6.x86_64 rpm-libs-4.8.0-55.el6.x86_64 openscap-1.2.13-2.0.1.el6.x86_64 man-1.6f-39.el6.x86_64 gnupg2-2.0.14-9.el6_10.x86_64 acl-2.2.49-7.el6_9.1.x86_64 gdisk-0.8.10-1.el6.x86_64 m4-1.4.13-5.el6.x86_64 log4cpp-1.0-13.el6_5.1.x86_64 db4-ovs-devel-4.7.25-20.0.1.el6_7.x86_64 libusb-0.1.12-23.el6.x86_64 osmd-0.9-22.el6.x86_64 perl-ExtUtils-ParseXS-2.2003.0-144.el6.x86_64 perl-Test-Simple-0.92-144.el6.x86_64 msr-tools-1.3-3.el6.x86_64 shadow-utils-4.1.5.1-5.el6.x86_64 libutempter-1.1.5-4.1.el6.x86_64 polkit-0.96-11.el6.x86_64 glusterfs-api-3.12.2-18.el6.x86_64 libthai-0.1.12-3.el6.x86_64 sg3_utils-1.28-12.el6.x86_64 libyaml-0.1.3-4.el6_6.x86_64 libX11-1.6.4-3.el6.x86_64 libXi-1.7.8-1.el6.x86_64 pango-1.28.1-11.el6.x86_64 gdk-pixbuf2-2.24.1-6.el6_7.x86_64 libXtst-1.2.3-1.el6.x86_64 gtk2-2.24.23-9.el6.x86_64 python-libs-2.6.6-66.0.1.el6_8.x86_64 libselinux-python-2.0.94-7.el6.x86_64 libxml2-python-2.7.6-21.0.1.el6_8.1.x86_64 pygpgme-0.1-18.20090824bzr68.el6.x86_64 gdb-7.2-92.el6.x86_64 python-ipaddr-2.1.9-3.el6.noarch python-iniparse-0.3.1-2.1.el6.noarch python-jsonpatch-1.2-4.el6.noarch python-cheetah-2.4.1-1.el6.x86_64 python-urllib3-1.10.2-3.el6.noarch tcl-8.5.7-6.el6.x86_64 newt-python-0.52.11-4.el6.x86_64 libusbx-1.0.15-4.el6.x86_64 dhcp-common-4.1.1-53.P1.0.1.el6_9.4.x86_64 iptables-1.4.7-16.0.5.el6.x86_64 plymouth-0.8.3-29.0.1.el6.x86_64 mesa-libGL-11.0.7-4.el6.x86_64 device-mapper-1.02.117-12.el6_9.1.x86_64 iptables-ipv6-1.4.7-16.0.5.el6.x86_64 libcgroup-0.40.rc1-24.el6_9.x86_64 phonon-backend-gstreamer-4.6.2-28.el6_5.x86_64 openssh-5.3p1-123.el6_9.x86_64 dmraid-1.0.0.rc16-11.el6.x86_64 policycoreutils-python-2.0.83-30.1.0.1.el6_8.x86_64 foomatic-4.0.4-5.el6_7.x86_64 parted-2.1-29.el6.x86_64 at-3.1.10-49.el6.x86_64 dracut-004-409.0.7.el6_8.2.noarch kernel-uek-4.1.12-124.21.1.el6uek.x86_64 ibacm-1.2.1-1.0.2.el6.x86_64 fcoe-utils-1.0.28-6.el6.x86_64 perftest-3.0-0.0.2.el6.x86_64 libibcm-1.0.5-1.0.3.el6.x86_64 dhclient-4.1.1-53.P1.0.1.el6_9.4.x86_64 smartmontools-5.43-3.el6.x86_64 cyrus-sasl-2.1.23-15.el6_6.2.x86_64 cronie-1.4.4-16.el6_8.2.x86_64 oswatcher-7.3.3-3.el6.noarch redhat-lsb-4.0-7.0.2.el6.x86_64 xen-tools-4.4.4-222.el6.x86_64 libvirt-daemon-driver-nwfilter-1.2.14-19.1.el6.x86_64 libvirt-daemon-driver-nodedev-1.2.14-19.1.el6.x86_64 libvirt-daemon-driver-qemu-1.2.14-19.1.el6.x86_64 ovs-config-3.4.1-6.el6.24.noarch rpmdevtools-7.5-2.0.1.el6.noarch ovmwatch-1.0-168.el6.196.5.x86_64 irqbalance-1.0.9-2.0.1.el6.x86_64 mcstrans-0.3.1-4.el6.x86_64 yum-3.2.29-81.0.1.el6.noarch python-simplejson-2.0.9-3.1.el6.x86_64 pexpect-2.3-11.el6.noarch sysfsutils-2.1.0-7.el6.x86_64 lsof-4.82-5.el6.x86_64 setserial-2.17-25.el6.x86_64 liblockfile-1.08-20.el6.x86_64 ovs-release-3.4-7.844.6.el6.x86_64 [root@vhost0 ~]# cat /etc/redhat-release Oracle VM server release 3.4.6 [root@vhost0 ~]# yum update Setting up Update Process No Packages marked for Update [root@vhost0 ~]# yum install xz-devel zip Setting up Install Process No package xz-devel available. No package zip available. Error: Nothing to do [root@vhost0 ~]# df -h Filesystem Size Used Avail Use% Mounted on /dev/sda2 23G 1.7G 20G 8% / tmpfs 582M 0 582M 0% /dev/shm /dev/sda1 477M 96M 352M 22% /boot none 582M 48K 582M 1% /var/lib/xenstored [root@vhost0 ~]# lspci 00:00.0 Host bridge: Intel Corporation 5520 I/O Hub to ESI Port (rev 13) 00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13) 00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13) 00:07.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 (rev 13) 00:10.0 PIC: Intel Corporation 7500/5520/5500/X58 Physical and Link Layer Registers Port 0 (rev 13) 00:10.1 PIC: Intel Corporation 7500/5520/5500/X58 Routing and Protocol Layer Registers Port 0 (rev 13) 00:11.0 PIC: Intel Corporation 7500/5520/5500 Physical and Link Layer Registers Port 1 (rev 13) 00:11.1 PIC: Intel Corporation 7500/5520/5500 Routing & Protocol Layer Register Port 1 (rev 13) 00:14.0 PIC: Intel Corporation 7500/5520/5500/X58 I/O Hub System Management Registers (rev 13) 00:14.1 PIC: Intel Corporation 7500/5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 13) 00:14.2 PIC: Intel Corporation 7500/5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 13) 00:15.0 PIC: Intel Corporation 7500/5520/5500/X58 Trusted Execution Technology Registers (rev 13) 00:1a.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 00:1a.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 00:1a.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 00:1a.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 00:1c.5 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 6 00:1d.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 00:1d.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 00:1d.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 00:1d.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller 00:1f.2 RAID bus controller: Intel Corporation SATA Controller [RAID mode] 01:00.0 Ethernet controller: Broadcom Limited NetXtreme BCM5764M Gigabit Ethernet PCIe (rev 10) 0f:00.0 PCI bridge: Integrated Device Technology, Inc. [IDT] PES24T6G2 PCI Express Gen2 Switch (rev 02) 10:02.0 PCI bridge: Integrated Device Technology, Inc. [IDT] PES24T6G2 PCI Express Gen2 Switch (rev 02) 10:03.0 PCI bridge: Integrated Device Technology, Inc. [IDT] PES24T6G2 PCI Express Gen2 Switch (rev 02) 10:04.0 PCI bridge: Integrated Device Technology, Inc. [IDT] PES24T6G2 PCI Express Gen2 Switch (rev 02) 10:05.0 PCI bridge: Integrated Device Technology, Inc. [IDT] PES24T6G2 PCI Express Gen2 Switch (rev 02) 12:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9235 PCIe 2.0 x2 4-port SATA 6 Gb/s Controller (rev 11) 13:00.0 Non-Volatile memory controller: Intel Corporation Device f1a8 (rev 03) 14:00.0 Non-Volatile memory controller: Intel Corporation Device f1a8 (rev 03) 28:00.0 PCI bridge: Integrated Device Technology, Inc. [IDT] PES24T6G2 PCI Express Gen2 Switch (rev 02) 29:02.0 PCI bridge: Integrated Device Technology, Inc. [IDT] PES24T6G2 PCI Express Gen2 Switch (rev 02) 29:03.0 PCI bridge: Integrated Device Technology, Inc. [IDT] PES24T6G2 PCI Express Gen2 Switch (rev 02) 29:04.0 PCI bridge: Integrated Device Technology, Inc. [IDT] PES24T6G2 PCI Express Gen2 Switch (rev 02) 29:05.0 PCI bridge: Integrated Device Technology, Inc. [IDT] PES24T6G2 PCI Express Gen2 Switch (rev 02) 2b:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9235 PCIe 2.0 x2 4-port SATA 6 Gb/s Controller (rev 11) 2c:00.0 Non-Volatile memory controller: Intel Corporation Device f1a8 (rev 03) 2d:00.0 Non-Volatile memory controller: Intel Corporation Device f1a8 (rev 03) 37:05.0 FireWire (IEEE 1394): LSI Corporation FW322/323 [TrueFire] 1394a Controller (rev 70) 37:09.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Rage XL PCI (rev 27) 3e:00.0 Host bridge: Intel Corporation Xeon 5600 Series QuickPath Architecture Generic Non-core Registers (rev 02) 3e:00.1 Host bridge: Intel Corporation Xeon 5600 Series QuickPath Architecture System Address Decoder (rev 02) 3e:02.0 Host bridge: Intel Corporation Xeon 5600 Series QPI Link 0 (rev 02) 3e:02.1 Host bridge: Intel Corporation Xeon 5600 Series QPI Physical 0 (rev 02) 3e:02.2 Host bridge: Intel Corporation Xeon 5600 Series Mirror Port Link 0 (rev 02) 3e:02.3 Host bridge: Intel Corporation Xeon 5600 Series Mirror Port Link 1 (rev 02) 3e:02.4 Host bridge: Intel Corporation Xeon 5600 Series QPI Link 1 (rev 02) 3e:02.5 Host bridge: Intel Corporation Xeon 5600 Series QPI Physical 1 (rev 02) 3e:03.0 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Registers (rev 02) 3e:03.1 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Target Address Decoder (rev 02) 3e:03.2 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller RAS Registers (rev 02) 3e:03.4 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Test Registers (rev 02) 3e:04.0 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Control (rev 02) 3e:04.1 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Address (rev 02) 3e:04.2 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Rank (rev 02) 3e:04.3 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Thermal Control (rev 02) 3e:05.0 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Control (rev 02) 3e:05.1 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Address (rev 02) 3e:05.2 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Rank (rev 02) 3e:05.3 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Thermal Control (rev 02) 3e:06.0 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Control (rev 02) 3e:06.1 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Address (rev 02) 3e:06.2 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Rank (rev 02) 3e:06.3 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Thermal Control (rev 02) 3f:00.0 Host bridge: Intel Corporation Xeon 5600 Series QuickPath Architecture Generic Non-core Registers (rev 02) 3f:00.1 Host bridge: Intel Corporation Xeon 5600 Series QuickPath Architecture System Address Decoder (rev 02) 3f:02.0 Host bridge: Intel Corporation Xeon 5600 Series QPI Link 0 (rev 02) 3f:02.1 Host bridge: Intel Corporation Xeon 5600 Series QPI Physical 0 (rev 02) 3f:02.2 Host bridge: Intel Corporation Xeon 5600 Series Mirror Port Link 0 (rev 02) 3f:02.3 Host bridge: Intel Corporation Xeon 5600 Series Mirror Port Link 1 (rev 02) 3f:02.4 Host bridge: Intel Corporation Xeon 5600 Series QPI Link 1 (rev 02) 3f:02.5 Host bridge: Intel Corporation Xeon 5600 Series QPI Physical 1 (rev 02) 3f:03.0 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Registers (rev 02) 3f:03.1 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Target Address Decoder (rev 02) 3f:03.2 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller RAS Registers (rev 02) 3f:03.4 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Test Registers (rev 02) 3f:04.0 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Control (rev 02) 3f:04.1 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Address (rev 02) 3f:04.2 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Rank (rev 02) 3f:04.3 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Thermal Control (rev 02) 3f:05.0 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Control (rev 02) 3f:05.1 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Address (rev 02) 3f:05.2 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Rank (rev 02) 3f:05.3 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Thermal Control (rev 02) 3f:06.0 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Control (rev 02) 3f:06.1 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Address (rev 02) 3f:06.2 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Rank (rev 02) 3f:06.3 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Thermal Control (rev 02) [root@vhost0 ~]# lspci > lspci.out [root@vhost0 ~]# dmesg [ 0.000000] PAT configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.1.12-124.21.1.el6uek.x86_64 (mockbuild@ca-build84.us.oracle.com) (gcc version 4.9.2 20150212 (Red Hat 4.9.2-6.2.0.3) (GCC) ) #2 SMP Tue Nov 6 13:31:13 PST 2018 [ 0.000000] Command line: placeholder root=UUID=9bcba43f-a6b8-45d4-a58e-7335931f88da ro rd_NO_LUKS rd_NO_LVM LANG=en_US.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rhgb quiet [ 0.000000] Released 0 page(s) [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000094fff] usable [ 0.000000] Xen: [mem 0x0000000000095800-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x000000004f86afff] usable [ 0.000000] Xen: [mem 0x00000000eefa5800-0x00000000f3ffffff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fed3ffff] reserved [ 0.000000] Xen: [mem 0x00000000fed45000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Hewlett-Packard HP Z600 Workstation/0B54h, BIOS 786G4 v03.60 02/24/2016 [ 0.000000] Hypervisor detected: Xen [ 0.000000] Kernel/User page tables isolation: disabled [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] AGP: No AGP bridge found [ 0.000000] e820: last_pfn = 0x4f86b max_arch_pfn = 0x400000000 [ 0.000000] Base memory trampoline at [ffff88000008e000] 8e000 size 28672 [ 0.000000] BRK [0x02158000, 0x02158fff] PGTABLE [ 0.000000] BRK [0x02159000, 0x02159fff] PGTABLE [ 0.000000] BRK [0x0215a000, 0x0215afff] PGTABLE [ 0.000000] BRK [0x0215b000, 0x0215bfff] PGTABLE [ 0.000000] BRK [0x0215c000, 0x0215cfff] PGTABLE [ 0.000000] BRK [0x0215d000, 0x0215dfff] PGTABLE [ 0.000000] RAMDISK: [mem 0x04000000-0x06541fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000E9010 000024 (v02 HPQOEM) [ 0.000000] ACPI: XSDT 0x00000000EEFB88E8 000074 (v01 HPQOEM SLIC-WKS 20160224 00000000) [ 0.000000] ACPI: FACP 0x00000000EEFB8A88 0000F4 (v03 HPQOEM TYLSBURG 00000001 00000000) [ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aEventBlock: 32/16 (20150410/tbfadt-623) [ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20150410/tbfadt-623) [ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aEventBlock: 16, using default 32 (20150410/tbfadt-704) [ 0.000000] ACPI: DSDT 0x00000000EEFB941B 00A674 (v01 COMPAQ DSDT_PRJ 00000001 MSFT 0100000E) [ 0.000000] ACPI: FACS 0x00000000EEFB8800 000040 [ 0.000000] ACPI: FACS 0x00000000EEFB8800 000040 [ 0.000000] ACPI: APIC 0x00000000EEFB8B7C 000188 (v01 HPQOEM TYLSBURG 00000001 00000000) [ 0.000000] ACPI: ASF! 0x00000000EEFB8D04 000063 (v32 HPQOEM TYLSBURG 00000001 00000000) [ 0.000000] ACPI: MCFG 0x00000000EEFB8D67 00003C (v01 HPQOEM TYLSBURG 00000001 00000000) [ 0.000000] ACPI: TCPA 0x00000000EEFB8DA3 000032 (v01 HPQOEM TYLSBURG 00000001 00000000) [ 0.000000] ACPI: SLIC 0x00000000EEFB8DD5 000176 (v01 HPQOEM SLIC-WKS 00000001 00000000) [ 0.000000] ACPI: HPET 0x00000000EEFB8F4B 000038 (v01 HPQOEM TYLSBURG 00000001 00000000) [ 0.000000] ACPI: XMAR 0x00000000EEFB8F83 000170 (v01 HPQOEM TYLSBURG 00000001 00000000) [ 0.000000] ACPI: SRAT 0x00000000EEFB9123 0002F8 (v02 HPQOEM TYLSBURG 00000001 00000000) [ 0.000000] ACPI: SSDT 0x00000000EEFC4E11 0075FC (v01 INTEL PPM RCM 80000001 INTL 20061109) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Setting APIC routing to Xen PV. [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000004f86afff] [ 0.000000] NODE_DATA(0) allocated [mem 0x4f573000-0x4f599fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x000000004f86afff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000094fff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000004f86afff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000004f86afff] [ 0.000000] On node 0 totalpages: 325631 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 22 pages reserved [ 0.000000] DMA zone: 3988 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 5026 pages used for memmap [ 0.000000] DMA32 zone: 321643 pages, LIFO batch:31 [ 0.000000] p2m virtual area at ffffc90000000000, size is 400000 [ 0.000000] Remapped 107 page(s) [ 0.000000] ACPI: PM-Timer IO Port: 0xf808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] IOAPIC[1]: apic_id 2, version 32, address 0xfec10000, GSI 24-47 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] smpboot: Allowing 32 CPUs, 8 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00095000-0x00095fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00096000-0x000fffff] [ 0.000000] e820: [mem 0x4f86b000-0xeefa57ff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 4.4.4OVM (preserve-AD) [ 0.000000] clocksource refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 35 pages/cpu @ffff88004d000000 s104536 r8192 d30632 u262144 [ 0.000000] pcpu-alloc: s104536 r8192 d30632 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 [ 0.000000] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31 [ 0.000000] xen: PV spinlocks enabled [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 320519 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: placeholder root=UUID=9bcba43f-a6b8-45d4-a58e-7335931f88da ro rd_NO_LUKS rd_NO_LVM LANG=en_US.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rhgb quiet [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] software IO TLB [mem 0x49000000-0x4d000000] (64MB) mapped at [ffff880049000000-ffff88004cffffff] [ 0.000000] Memory: 1149992K/1302524K available (7148K kernel code, 1654K rwdata, 3900K rodata, 1988K init, 3012K bss, 152532K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=20, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=20. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=20 [ 0.000000] NR_IRQS:524544 nr_irqs:992 16 [ 0.000000] xen:events: Using FIFO-based ABI [ 0.000000] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.000000] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.000000] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.000000] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.000000] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.000000] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.000000] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.000000] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.000000] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.000000] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.000000] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.000000] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.000000] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.000000] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.000000] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-19. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000000] Xen: using vcpuop timer interface [ 0.000000] installing Xen timer for CPU 0 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3058.885 MHz processor [ 4.939039] Calibrating delay loop (skipped), value calculated using timer frequency.. 6118.14 BogoMIPS (lpj=3059072) [ 4.939041] pid_max: default: 32768 minimum: 301 [ 4.939050] ACPI: Core revision 20150410 [ 4.969044] ACPI: All ACPI Tables successfully acquired [ 4.969364] Security Framework initialized [ 4.969371] SELinux: Initializing. [ 4.969379] SELinux: Starting in permissive mode [ 4.969727] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 4.970188] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 4.970345] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 4.970353] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 4.970623] Initializing cgroup subsys blkio [ 4.970627] Initializing cgroup subsys memory [ 4.970637] Initializing cgroup subsys devices [ 4.970640] Initializing cgroup subsys freezer [ 4.970643] Initializing cgroup subsys net_cls [ 4.970647] Initializing cgroup subsys perf_event [ 4.970651] Initializing cgroup subsys net_prio [ 4.970653] Initializing cgroup subsys hugetlb [ 4.970704] FEATURE SPEC_CTRL Not Present [ 4.970704] FEATURE IBPB Not Present [ 4.970724] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 4.970725] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 4.970729] mce: CPU supports 2 MCE banks [ 4.970747] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7 [ 4.970748] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 4.970752] Spectre V2 : Options: retpoline [ 4.971139] Spectre V2 : Mitigation: Full generic retpoline [ 4.971140] Spectre V2 : Filling RSB on context switch [ 4.971142] Speculative Store Bypass: Vulnerable [ 4.971392] Freeing SMP alternatives memory: 28K (ffffffff81e5e000 - ffffffff81e65000) [ 4.974748] ftrace: allocating 27423 entries in 108 pages [ 4.998056] cpu 0 spinlock event irq 49 [ 4.998068] VPMU disabled by hypervisor. [ 5.015200] Performance Events: unsupported p6 CPU model 44 no PMU driver, software events only. [ 5.016162] NMI watchdog: disabled (cpu0): hardware events not enabled [ 5.016164] NMI watchdog: Shutting down hard lockup detector on all cpus [ 5.016307] installing Xen timer for CPU 1 [ 5.016321] cpu 1 spinlock event irq 56 [ 5.016761] installing Xen timer for CPU 2 [ 5.016775] cpu 2 spinlock event irq 63 [ 5.017122] installing Xen timer for CPU 3 [ 5.017136] cpu 3 spinlock event irq 70 [ 5.017466] installing Xen timer for CPU 4 [ 5.017479] cpu 4 spinlock event irq 77 [ 5.017805] installing Xen timer for CPU 5 [ 5.017822] cpu 5 spinlock event irq 84 [ 5.018169] installing Xen timer for CPU 6 [ 5.018183] cpu 6 spinlock event irq 91 [ 5.018513] installing Xen timer for CPU 7 [ 5.018528] cpu 7 spinlock event irq 98 [ 5.018849] installing Xen timer for CPU 8 [ 5.018863] cpu 8 spinlock event irq 105 [ 5.019212] installing Xen timer for CPU 9 [ 5.019228] cpu 9 spinlock event irq 112 [ 5.019554] installing Xen timer for CPU 10 [ 5.019569] cpu 10 spinlock event irq 119 [ 5.019850] installing Xen timer for CPU 11 [ 5.019862] cpu 11 spinlock event irq 126 [ 5.020176] installing Xen timer for CPU 12 [ 5.020187] cpu 12 spinlock event irq 133 [ 5.020545] installing Xen timer for CPU 13 [ 5.020558] cpu 13 spinlock event irq 140 [ 5.020856] installing Xen timer for CPU 14 [ 5.020868] cpu 14 spinlock event irq 147 [ 5.021188] installing Xen timer for CPU 15 [ 5.021201] cpu 15 spinlock event irq 154 [ 5.021503] installing Xen timer for CPU 16 [ 5.021514] cpu 16 spinlock event irq 161 [ 5.021814] installing Xen timer for CPU 17 [ 5.021826] cpu 17 spinlock event irq 168 [ 5.022144] installing Xen timer for CPU 18 [ 5.022159] cpu 18 spinlock event irq 175 [ 5.022465] installing Xen timer for CPU 19 [ 5.022478] cpu 19 spinlock event irq 182 [ 5.022673] x86: Booted up 1 node, 20 CPUs [ 5.023279] devtmpfs: initialized [ 5.026327] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 5.026621] pinctrl core: initialized pinctrl subsystem [ 5.026880] NET: Registered protocol family 16 [ 5.026899] xen:grant_table: Grant tables using version 1 layout [ 5.026936] Grant table initialized [ 5.027319] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 5.027321] ACPI: bus type PCI registered [ 5.027323] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 5.027655] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 5.027658] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 [ 5.035920] PCI: Using configuration type 1 for base access [ 5.041907] ACPI: Added _OSI(Module Device) [ 5.041909] ACPI: Added _OSI(Processor Device) [ 5.041911] ACPI: Added _OSI(3.0 _SCP Extensions) [ 5.041912] ACPI: Added _OSI(Processor Aggregator Device) [ 5.044346] xen: registering gsi 9 triggering 0 polarity 0 [ 5.052898] ACPI: Interpreter enabled [ 5.052905] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150410/hwxface-580) [ 5.052909] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150410/hwxface-580) [ 5.052921] ACPI: (supports S0 S3 S4 S5) [ 5.052922] ACPI: Using IOAPIC for interrupt routing [ 5.052945] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 5.058803] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3d]) [ 5.058809] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 5.058875] ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20150410/dsfield-211) [ 5.058879] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff880048cb6fa0), AE_ALREADY_EXISTS (20150410/psparse-536) [ 5.058887] acpi PNP0A08:00: _OSC failed (AE_ALREADY_EXISTS); disabling ASPM [ 5.059093] acpi PNP0A08:00: host bridge window expanded to [io 0x0000-0x03af window]; [io 0x0000-0x03af window] ignored [ 5.059240] PCI host bridge to bus 0000:00 [ 5.059243] pci_bus 0000:00: root bus resource [bus 00-3d] [ 5.059246] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 5.059247] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfdffffff window] [ 5.059250] pci_bus 0000:00: root bus resource [mem 0xfed00000-0xfed003ff window] [ 5.059251] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] [ 5.059253] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 5.059255] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 5.059257] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 5.059259] pci_bus 0000:00: root bus resource [io 0x0d00-0x0fff window] [ 5.059261] pci_bus 0000:00: root bus resource [io 0x1000-0xefff window] [ 5.059282] pci 0000:00:00.0: [8086:3406] type 00 class 0x060000 [ 5.059408] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 5.059528] pci 0000:00:01.0: [8086:3408] type 01 class 0x060400 [ 5.059645] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 5.059692] pci 0000:00:01.0: System wakeup disabled by ACPI [ 5.059762] pci 0000:00:03.0: [8086:340a] type 01 class 0x060400 [ 5.059877] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 5.059921] pci 0000:00:03.0: System wakeup disabled by ACPI [ 5.059993] pci 0000:00:07.0: [8086:340e] type 01 class 0x060400 [ 5.060110] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 5.060155] pci 0000:00:07.0: System wakeup disabled by ACPI [ 5.060227] pci 0000:00:10.0: [8086:3425] type 00 class 0x080000 [ 5.060406] pci 0000:00:10.1: [8086:3426] type 00 class 0x080000 [ 5.060573] pci 0000:00:11.0: [8086:3427] type 00 class 0x080000 [ 5.060741] pci 0000:00:11.1: [8086:3428] type 00 class 0x080000 [ 5.060901] pci 0000:00:14.0: [8086:342e] type 00 class 0x080000 [ 5.061084] pci 0000:00:14.1: [8086:3422] type 00 class 0x080000 [ 5.061261] pci 0000:00:14.2: [8086:3423] type 00 class 0x080000 [ 5.061452] pci 0000:00:15.0: [8086:342f] type 00 class 0x080020 [ 5.061628] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300 [ 5.061714] pci 0000:00:1a.0: reg 0x20: [io 0xb000-0xb01f] [ 5.061812] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 5.061868] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300 [ 5.061952] pci 0000:00:1a.1: reg 0x20: [io 0xb020-0xb03f] [ 5.062050] pci 0000:00:1a.1: System wakeup disabled by ACPI [ 5.062106] pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300 [ 5.062191] pci 0000:00:1a.2: reg 0x20: [io 0xb040-0xb05f] [ 5.062290] pci 0000:00:1a.2: System wakeup disabled by ACPI [ 5.062364] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320 [ 5.062398] pci 0000:00:1a.7: reg 0x10: [mem 0xfa004800-0xfa004bff] [ 5.062558] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 5.062601] pci 0000:00:1a.7: System wakeup disabled by ACPI [ 5.062679] pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300 [ 5.062711] pci 0000:00:1b.0: reg 0x10: [mem 0xfa000000-0xfa003fff 64bit] [ 5.062845] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 5.062951] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400 [ 5.063079] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 5.063124] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 5.063196] pci 0000:00:1c.5: [8086:3a4a] type 01 class 0x060400 [ 5.063325] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 5.063379] pci 0000:00:1c.5: System wakeup disabled by ACPI [ 5.063448] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300 [ 5.063542] pci 0000:00:1d.0: reg 0x20: [io 0xb060-0xb07f] [ 5.063645] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 5.063704] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300 [ 5.063788] pci 0000:00:1d.1: reg 0x20: [io 0xb080-0xb09f] [ 5.063886] pci 0000:00:1d.1: System wakeup disabled by ACPI [ 5.063944] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300 [ 5.064028] pci 0000:00:1d.2: reg 0x20: [io 0xb0a0-0xb0bf] [ 5.064126] pci 0000:00:1d.2: System wakeup disabled by ACPI [ 5.064196] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320 [ 5.064229] pci 0000:00:1d.7: reg 0x10: [mem 0xfa004c00-0xfa004fff] [ 5.064385] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 5.064429] pci 0000:00:1d.7: System wakeup disabled by ACPI [ 5.064497] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 5.064634] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 5.064694] pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100 [ 5.064834] pci 0000:00:1f.0: can't claim BAR 13 [io 0xf800-0xf87f]: no compatible bridge window [ 5.064841] pci 0000:00:1f.0: can't claim BAR 14 [io 0xfa00-0xfa3f]: no compatible bridge window [ 5.064846] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0400 (mask 007f) [ 5.064850] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0480 (mask 000f) [ 5.064854] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0cb0 (mask 000f) [ 5.064987] pci 0000:00:1f.2: [8086:2822] type 00 class 0x010400 [ 5.065019] pci 0000:00:1f.2: reg 0x10: [io 0xb100-0xb107] [ 5.065034] pci 0000:00:1f.2: reg 0x14: [io 0xb110-0xb113] [ 5.065049] pci 0000:00:1f.2: reg 0x18: [io 0xb108-0xb10f] [ 5.065065] pci 0000:00:1f.2: reg 0x1c: [io 0xb114-0xb117] [ 5.065080] pci 0000:00:1f.2: reg 0x20: [io 0xb0c0-0xb0df] [ 5.065095] pci 0000:00:1f.2: reg 0x24: [mem 0xfa004000-0xfa0047ff] [ 5.065172] pci 0000:00:1f.2: PME# supported from D3hot [ 5.065345] pci 0000:00:01.0: PCI bridge to [bus 03] [ 5.065467] pci 0000:0f:00.0: [111d:806e] type 01 class 0x060400 [ 5.065612] pci 0000:0f:00.0: PME# supported from D0 D3hot D3cold [ 5.067593] pci 0000:00:03.0: PCI bridge to [bus 0f-14] [ 5.067600] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff] [ 5.067605] pci 0000:00:03.0: bridge window [mem 0xf9000000-0xf92fffff] [ 5.067704] pci 0000:10:02.0: [111d:806e] type 01 class 0x060400 [ 5.067852] pci 0000:10:02.0: PME# supported from D0 D3hot D3cold [ 5.067954] pci 0000:10:03.0: [111d:806e] type 01 class 0x060400 [ 5.068100] pci 0000:10:03.0: PME# supported from D0 D3hot D3cold [ 5.068200] pci 0000:10:04.0: [111d:806e] type 01 class 0x060400 [ 5.068345] pci 0000:10:04.0: PME# supported from D0 D3hot D3cold [ 5.068449] pci 0000:10:05.0: [111d:806e] type 01 class 0x060400 [ 5.068605] pci 0000:10:05.0: PME# supported from D0 D3hot D3cold [ 5.068785] pci 0000:0f:00.0: PCI bridge to [bus 10-14] [ 5.068797] pci 0000:0f:00.0: bridge window [io 0xc000-0xcfff] [ 5.068803] pci 0000:0f:00.0: bridge window [mem 0xf9000000-0xf92fffff] [ 5.068878] pci 0000:10:02.0: PCI bridge to [bus 11] [ 5.068993] pci 0000:12:00.0: [1b4b:9235] type 00 class 0x010601 [ 5.069019] pci 0000:12:00.0: reg 0x10: [io 0xc020-0xc027] [ 5.069037] pci 0000:12:00.0: reg 0x14: [io 0xc030-0xc033] [ 5.069054] pci 0000:12:00.0: reg 0x18: [io 0xc028-0xc02f] [ 5.069071] pci 0000:12:00.0: reg 0x1c: [io 0xc034-0xc037] [ 5.069089] pci 0000:12:00.0: reg 0x20: [io 0xc000-0xc01f] [ 5.069106] pci 0000:12:00.0: reg 0x24: [mem 0xf9200000-0xf92007ff] [ 5.069124] pci 0000:12:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 5.069202] pci 0000:12:00.0: PME# supported from D3hot [ 5.069327] pci 0000:10:03.0: PCI bridge to [bus 12] [ 5.069338] pci 0000:10:03.0: bridge window [io 0xc000-0xcfff] [ 5.069344] pci 0000:10:03.0: bridge window [mem 0xf9200000-0xf92fffff] [ 5.069454] pci 0000:13:00.0: [8086:f1a8] type 00 class 0x010802 [ 5.069495] pci 0000:13:00.0: reg 0x10: [mem 0xf9000000-0xf9003fff 64bit] [ 5.069605] pci 0000:13:00.0: can't set Max Payload Size to 256; if necessary, use "pci=pcie_bus_safe" and report a bug [ 5.069859] pci 0000:10:04.0: PCI bridge to [bus 13] [ 5.069875] pci 0000:10:04.0: bridge window [mem 0xf9000000-0xf90fffff] [ 5.069982] pci 0000:14:00.0: [8086:f1a8] type 00 class 0x010802 [ 5.070025] pci 0000:14:00.0: reg 0x10: [mem 0xf9100000-0xf9103fff 64bit] [ 5.070127] pci 0000:14:00.0: can't set Max Payload Size to 256; if necessary, use "pci=pcie_bus_safe" and report a bug [ 5.070374] pci 0000:10:05.0: PCI bridge to [bus 14] [ 5.070390] pci 0000:10:05.0: bridge window [mem 0xf9100000-0xf91fffff] [ 5.070561] pci 0000:28:00.0: [111d:806e] type 01 class 0x060400 [ 5.070705] pci 0000:28:00.0: PME# supported from D0 D3hot D3cold [ 5.072626] pci 0000:00:07.0: PCI bridge to [bus 28-2d] [ 5.072633] pci 0000:00:07.0: bridge window [io 0xd000-0xdfff] [ 5.072638] pci 0000:00:07.0: bridge window [mem 0xf8000000-0xf82fffff] [ 5.072738] pci 0000:29:02.0: [111d:806e] type 01 class 0x060400 [ 5.072886] pci 0000:29:02.0: PME# supported from D0 D3hot D3cold [ 5.072987] pci 0000:29:03.0: [111d:806e] type 01 class 0x060400 [ 5.073133] pci 0000:29:03.0: PME# supported from D0 D3hot D3cold [ 5.073232] pci 0000:29:04.0: [111d:806e] type 01 class 0x060400 [ 5.073378] pci 0000:29:04.0: PME# supported from D0 D3hot D3cold [ 5.073481] pci 0000:29:05.0: [111d:806e] type 01 class 0x060400 [ 5.073638] pci 0000:29:05.0: PME# supported from D0 D3hot D3cold [ 5.073820] pci 0000:28:00.0: PCI bridge to [bus 29-2d] [ 5.073832] pci 0000:28:00.0: bridge window [io 0xd000-0xdfff] [ 5.073838] pci 0000:28:00.0: bridge window [mem 0xf8000000-0xf82fffff] [ 5.073915] pci 0000:29:02.0: PCI bridge to [bus 2a] [ 5.074029] pci 0000:2b:00.0: [1b4b:9235] type 00 class 0x010601 [ 5.074055] pci 0000:2b:00.0: reg 0x10: [io 0xd020-0xd027] [ 5.074073] pci 0000:2b:00.0: reg 0x14: [io 0xd030-0xd033] [ 5.074090] pci 0000:2b:00.0: reg 0x18: [io 0xd028-0xd02f] [ 5.074107] pci 0000:2b:00.0: reg 0x1c: [io 0xd034-0xd037] [ 5.074125] pci 0000:2b:00.0: reg 0x20: [io 0xd000-0xd01f] [ 5.074142] pci 0000:2b:00.0: reg 0x24: [mem 0xf8200000-0xf82007ff] [ 5.074160] pci 0000:2b:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 5.074238] pci 0000:2b:00.0: PME# supported from D3hot [ 5.074362] pci 0000:29:03.0: PCI bridge to [bus 2b] [ 5.074373] pci 0000:29:03.0: bridge window [io 0xd000-0xdfff] [ 5.074380] pci 0000:29:03.0: bridge window [mem 0xf8200000-0xf82fffff] [ 5.074489] pci 0000:2c:00.0: [8086:f1a8] type 00 class 0x010802 [ 5.074533] pci 0000:2c:00.0: reg 0x10: [mem 0xf8000000-0xf8003fff 64bit] [ 5.074642] pci 0000:2c:00.0: can't set Max Payload Size to 256; if necessary, use "pci=pcie_bus_safe" and report a bug [ 5.074894] pci 0000:29:04.0: PCI bridge to [bus 2c] [ 5.074910] pci 0000:29:04.0: bridge window [mem 0xf8000000-0xf80fffff] [ 5.075015] pci 0000:2d:00.0: [8086:f1a8] type 00 class 0x010802 [ 5.075056] pci 0000:2d:00.0: reg 0x10: [mem 0xf8100000-0xf8103fff 64bit] [ 5.075157] pci 0000:2d:00.0: can't set Max Payload Size to 256; if necessary, use "pci=pcie_bus_safe" and report a bug [ 5.075403] pci 0000:29:05.0: PCI bridge to [bus 2d] [ 5.075419] pci 0000:29:05.0: bridge window [mem 0xf8100000-0xf81fffff] [ 5.075570] pci 0000:00:1c.0: PCI bridge to [bus 1c] [ 5.075702] pci 0000:01:00.0: [14e4:1684] type 00 class 0x020000 [ 5.075744] pci 0000:01:00.0: reg 0x10: [mem 0xfb000000-0xfb00ffff 64bit] [ 5.075955] pci 0000:01:00.0: PME# supported from D3hot D3cold [ 5.078685] pci 0000:00:1c.5: PCI bridge to [bus 01] [ 5.078703] pci 0000:00:1c.5: bridge window [mem 0xfb000000-0xfb0fffff] [ 5.078822] pci 0000:37:05.0: [11c1:5811] type 00 class 0x0c0010 [ 5.078851] pci 0000:37:05.0: reg 0x10: [mem 0xfd000000-0xfd000fff] [ 5.078988] pci 0000:37:05.0: supports D1 D2 [ 5.078990] pci 0000:37:05.0: PME# supported from D0 D1 D2 D3hot [ 5.079074] pci 0000:37:09.0: [1002:4752] type 00 class 0x030000 [ 5.079104] pci 0000:37:09.0: reg 0x10: [mem 0xfc000000-0xfcffffff] [ 5.079123] pci 0000:37:09.0: reg 0x14: [io 0xe000-0xe0ff] [ 5.079141] pci 0000:37:09.0: reg 0x18: [mem 0xfd001000-0xfd001fff] [ 5.079207] pci 0000:37:09.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 5.079254] pci 0000:37:09.0: supports D1 D2 [ 5.079362] pci 0000:00:1e.0: PCI bridge to [bus 37] (subtractive decode) [ 5.079368] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff] [ 5.079374] pci 0000:00:1e.0: bridge window [mem 0xfc000000-0xfd0fffff] [ 5.079384] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 5.079386] pci 0000:00:1e.0: bridge window [mem 0xf8000000-0xfdffffff window] (subtractive decode) [ 5.079388] pci 0000:00:1e.0: bridge window [mem 0xfed00000-0xfed003ff window] (subtractive decode) [ 5.079390] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode) [ 5.079391] pci 0000:00:1e.0: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 5.079393] pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 5.079395] pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 5.079397] pci 0000:00:1e.0: bridge window [io 0x0d00-0x0fff window] (subtractive decode) [ 5.079398] pci 0000:00:1e.0: bridge window [io 0x1000-0xefff window] (subtractive decode) [ 5.079490] xen: registering gsi 13 triggering 1 polarity 0 [ 5.079911] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 14 15) [ 5.079996] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 14 15) [ 5.080082] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 14 15) [ 5.080167] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 14 15) [ 5.080252] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 14 15) [ 5.080336] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 14 15) [ 5.080421] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 14 15) [ 5.080505] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. [ 5.080616] ACPI: PCI Root Bridge [NHL1] (domain 0000 [bus 3f]) [ 5.080620] acpi PNP0A08:02: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 5.080624] acpi PNP0A08:02: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 5.080689] PCI host bridge to bus 0000:3f [ 5.080692] pci_bus 0000:3f: root bus resource [bus 3f] [ 5.080703] pci 0000:3f:00.0: [8086:2c70] type 00 class 0x060000 [ 5.080803] pci 0000:3f:00.1: [8086:2d81] type 00 class 0x060000 [ 5.080909] pci 0000:3f:02.0: [8086:2d90] type 00 class 0x060000 [ 5.081003] pci 0000:3f:02.1: [8086:2d91] type 00 class 0x060000 [ 5.081097] pci 0000:3f:02.2: [8086:2d92] type 00 class 0x060000 [ 5.081191] pci 0000:3f:02.3: [8086:2d93] type 00 class 0x060000 [ 5.081287] pci 0000:3f:02.4: [8086:2d94] type 00 class 0x060000 [ 5.081382] pci 0000:3f:02.5: [8086:2d95] type 00 class 0x060000 [ 5.081478] pci 0000:3f:03.0: [8086:2d98] type 00 class 0x060000 [ 5.081582] pci 0000:3f:03.1: [8086:2d99] type 00 class 0x060000 [ 5.081692] pci 0000:3f:03.2: [8086:2d9a] type 00 class 0x060000 [ 5.081790] pci 0000:3f:03.4: [8086:2d9c] type 00 class 0x060000 [ 5.081889] pci 0000:3f:04.0: [8086:2da0] type 00 class 0x060000 [ 5.081984] pci 0000:3f:04.1: [8086:2da1] type 00 class 0x060000 [ 5.082079] pci 0000:3f:04.2: [8086:2da2] type 00 class 0x060000 [ 5.082174] pci 0000:3f:04.3: [8086:2da3] type 00 class 0x060000 [ 5.082275] pci 0000:3f:05.0: [8086:2da8] type 00 class 0x060000 [ 5.082368] pci 0000:3f:05.1: [8086:2da9] type 00 class 0x060000 [ 5.082462] pci 0000:3f:05.2: [8086:2daa] type 00 class 0x060000 [ 5.082557] pci 0000:3f:05.3: [8086:2dab] type 00 class 0x060000 [ 5.082677] pci 0000:3f:06.0: [8086:2db0] type 00 class 0x060000 [ 5.082775] pci 0000:3f:06.1: [8086:2db1] type 00 class 0x060000 [ 5.082872] pci 0000:3f:06.2: [8086:2db2] type 00 class 0x060000 [ 5.082966] pci 0000:3f:06.3: [8086:2db3] type 00 class 0x060000 [ 5.083164] ACPI: PCI Root Bridge [NHL2] (domain 0000 [bus 3e]) [ 5.083168] acpi PNP0A08:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 5.083172] acpi PNP0A08:03: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 5.083235] PCI host bridge to bus 0000:3e [ 5.083237] pci_bus 0000:3e: root bus resource [bus 3e] [ 5.083247] pci 0000:3e:00.0: [8086:2c70] type 00 class 0x060000 [ 5.083349] pci 0000:3e:00.1: [8086:2d81] type 00 class 0x060000 [ 5.083455] pci 0000:3e:02.0: [8086:2d90] type 00 class 0x060000 [ 5.083550] pci 0000:3e:02.1: [8086:2d91] type 00 class 0x060000 [ 5.083656] pci 0000:3e:02.2: [8086:2d92] type 00 class 0x060000 [ 5.083763] pci 0000:3e:02.3: [8086:2d93] type 00 class 0x060000 [ 5.083862] pci 0000:3e:02.4: [8086:2d94] type 00 class 0x060000 [ 5.083956] pci 0000:3e:02.5: [8086:2d95] type 00 class 0x060000 [ 5.084052] pci 0000:3e:03.0: [8086:2d98] type 00 class 0x060000 [ 5.084146] pci 0000:3e:03.1: [8086:2d99] type 00 class 0x060000 [ 5.084240] pci 0000:3e:03.2: [8086:2d9a] type 00 class 0x060000 [ 5.084336] pci 0000:3e:03.4: [8086:2d9c] type 00 class 0x060000 [ 5.084435] pci 0000:3e:04.0: [8086:2da0] type 00 class 0x060000 [ 5.084529] pci 0000:3e:04.1: [8086:2da1] type 00 class 0x060000 [ 5.084636] pci 0000:3e:04.2: [8086:2da2] type 00 class 0x060000 [ 5.084744] pci 0000:3e:04.3: [8086:2da3] type 00 class 0x060000 [ 5.084846] pci 0000:3e:05.0: [8086:2da8] type 00 class 0x060000 [ 5.084939] pci 0000:3e:05.1: [8086:2da9] type 00 class 0x060000 [ 5.085033] pci 0000:3e:05.2: [8086:2daa] type 00 class 0x060000 [ 5.085131] pci 0000:3e:05.3: [8086:2dab] type 00 class 0x060000 [ 5.085232] pci 0000:3e:06.0: [8086:2db0] type 00 class 0x060000 [ 5.085327] pci 0000:3e:06.1: [8086:2db1] type 00 class 0x060000 [ 5.085423] pci 0000:3e:06.2: [8086:2db2] type 00 class 0x060000 [ 5.085517] pci 0000:3e:06.3: [8086:2db3] type 00 class 0x060000 [ 5.085976] ACPI: Enabled 1 GPEs in block 00 to 3F [ 5.086214] xen:balloon: Initialising balloon driver [ 5.086249] xen_balloon: Initialising balloon driver [ 5.086358] vgaarb: setting as boot device: PCI:0000:37:09.0 [ 5.086361] vgaarb: device added: PCI:0000:37:09.0,decodes=io+mem,owns=io+mem,locks=none [ 5.086367] vgaarb: loaded [ 5.086368] vgaarb: bridge control possible 0000:37:09.0 [ 5.086460] SCSI subsystem initialized [ 5.086615] libata version 3.00 loaded. [ 5.086674] ACPI: bus type USB registered [ 5.086699] usbcore: registered new interface driver usbfs [ 5.086711] usbcore: registered new interface driver hub [ 5.086836] usbcore: registered new device driver usb [ 5.087115] PCI: Using ACPI for IRQ routing [ 5.089786] PCI: pci_cache_line_size set to 64 bytes [ 5.090135] e820: reserve RAM buffer [mem 0x00095000-0x0009ffff] [ 5.090137] e820: reserve RAM buffer [mem 0x4f86b000-0x4fffffff] [ 5.090257] NetLabel: Initializing [ 5.090259] NetLabel: domain hash size = 128 [ 5.090259] NetLabel: protocols = UNLABELED CIPSOv4 [ 5.090272] NetLabel: unlabeled traffic allowed by default [ 5.090338] amd_nb: Cannot enumerate AMD northbridges [ 5.090412] Switched to clocksource xen [ 5.097949] pnp: PnP ACPI init [ 5.097988] xen: registering gsi 8 triggering 1 polarity 0 [ 5.098014] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 5.098022] xen: registering gsi 12 triggering 1 polarity 0 [ 5.098040] pnp 00:01: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active) [ 5.098047] xen: registering gsi 1 triggering 1 polarity 0 [ 5.098064] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active) [ 5.098188] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (disabled) [ 5.098225] pnp 00:04: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) [ 5.098491] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 5.098553] system 00:06: [io 0x0400-0x041f] has been reserved [ 5.098555] system 00:06: [io 0x0420-0x043f] has been reserved [ 5.098557] system 00:06: [io 0x0440-0x045f] has been reserved [ 5.098559] system 00:06: [io 0x0460-0x047f] has been reserved [ 5.098562] system 00:06: [io 0x0480-0x048f] has been reserved [ 5.098565] system 00:06: [io 0xf800-0xf81f] could not be reserved [ 5.098567] system 00:06: [io 0xf820-0xf83f] has been reserved [ 5.098570] system 00:06: [io 0xf840-0xf85f] has been reserved [ 5.098572] system 00:06: [io 0xf860-0xf87f] has been reserved [ 5.098574] system 00:06: [io 0xfa00-0xfa3f] has been reserved [ 5.098576] system 00:06: [io 0xfc00-0xfc7f] has been reserved [ 5.098578] system 00:06: [io 0xfc80-0xfcff] has been reserved [ 5.098579] system 00:06: [io 0xfe00-0xfe7f] has been reserved [ 5.098581] system 00:06: [io 0xfe80-0xfeff] has been reserved [ 5.098584] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 5.098645] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 5.098648] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 5.099089] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved [ 5.099092] system 00:08: [mem 0x00100000-0xefffffff] could not be reserved [ 5.099094] system 00:08: [mem 0x000e8000-0x000fffff] could not be reserved [ 5.099096] system 00:08: [mem 0xfec01000-0xfecfffff] could not be reserved [ 5.099099] system 00:08: [mem 0xfed00000-0xfed3ffff] could not be reserved [ 5.099101] system 00:08: [mem 0xfed45000-0xffffffff] has been reserved [ 5.099103] system 00:08: [mem 0xf0000000-0xf3ffffff] has been reserved [ 5.099105] system 00:08: [mem 0x000d4000-0x000e7fff] could not be reserved [ 5.099108] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active) [ 5.099116] pnp: PnP ACPI: found 9 devices [ 5.108785] PM-Timer failed consistency check (0xffffff) - aborting. [ 5.108985] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 1c] add_size 1000 [ 5.108988] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 1c] add_size 200000 add_align 100000 [ 5.108991] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 1c] add_size 200000 add_align 100000 [ 5.109005] pci 0000:00:1c.5: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000 [ 5.109008] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000 [ 5.109040] pci 0000:00:1f.0: BAR 13: [io size 0x0080] has bogus alignment [ 5.109042] pci 0000:00:1f.0: BAR 14: [io size 0x0040] has bogus alignment [ 5.109045] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000 [ 5.109047] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000 [ 5.109049] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 5.109051] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 5.109053] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 5.109055] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 5.109057] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000 [ 5.109059] pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000 [ 5.109061] pci 0000:00:1c.5: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000 [ 5.109063] pci 0000:00:1c.5: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000 [ 5.109068] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf8300000-0xf84fffff] [ 5.109072] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf8500000-0xf86fffff 64bit pref] [ 5.109076] pci 0000:00:1c.5: BAR 15: assigned [mem 0xf8700000-0xf88fffff 64bit pref] [ 5.109079] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] [ 5.109082] pci 0000:00:1c.5: BAR 13: assigned [io 0x2000-0x2fff] [ 5.109085] pci 0000:00:01.0: PCI bridge to [bus 03] [ 5.109104] pci 0000:10:02.0: PCI bridge to [bus 11] [ 5.109128] pci 0000:12:00.0: BAR 6: assigned [mem 0xf9210000-0xf921ffff pref] [ 5.109130] pci 0000:10:03.0: PCI bridge to [bus 12] [ 5.109134] pci 0000:10:03.0: bridge window [io 0xc000-0xcfff] [ 5.109143] pci 0000:10:03.0: bridge window [mem 0xf9200000-0xf92fffff] [ 5.109159] pci 0000:10:04.0: PCI bridge to [bus 13] [ 5.109168] pci 0000:10:04.0: bridge window [mem 0xf9000000-0xf90fffff] [ 5.109184] pci 0000:10:05.0: PCI bridge to [bus 14] [ 5.109193] pci 0000:10:05.0: bridge window [mem 0xf9100000-0xf91fffff] [ 5.109209] pci 0000:0f:00.0: PCI bridge to [bus 10-14] [ 5.109213] pci 0000:0f:00.0: bridge window [io 0xc000-0xcfff] [ 5.109222] pci 0000:0f:00.0: bridge window [mem 0xf9000000-0xf92fffff] [ 5.109239] pci 0000:00:03.0: PCI bridge to [bus 0f-14] [ 5.109242] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff] [ 5.109249] pci 0000:00:03.0: bridge window [mem 0xf9000000-0xf92fffff] [ 5.109262] pci 0000:29:02.0: PCI bridge to [bus 2a] [ 5.109286] pci 0000:2b:00.0: BAR 6: assigned [mem 0xf8210000-0xf821ffff pref] [ 5.109287] pci 0000:29:03.0: PCI bridge to [bus 2b] [ 5.109292] pci 0000:29:03.0: bridge window [io 0xd000-0xdfff] [ 5.109301] pci 0000:29:03.0: bridge window [mem 0xf8200000-0xf82fffff] [ 5.109317] pci 0000:29:04.0: PCI bridge to [bus 2c] [ 5.109326] pci 0000:29:04.0: bridge window [mem 0xf8000000-0xf80fffff] [ 5.109342] pci 0000:29:05.0: PCI bridge to [bus 2d] [ 5.109350] pci 0000:29:05.0: bridge window [mem 0xf8100000-0xf81fffff] [ 5.109366] pci 0000:28:00.0: PCI bridge to [bus 29-2d] [ 5.109370] pci 0000:28:00.0: bridge window [io 0xd000-0xdfff] [ 5.109379] pci 0000:28:00.0: bridge window [mem 0xf8000000-0xf82fffff] [ 5.109396] pci 0000:00:07.0: PCI bridge to [bus 28-2d] [ 5.109399] pci 0000:00:07.0: bridge window [io 0xd000-0xdfff] [ 5.109414] pci 0000:00:07.0: bridge window [mem 0xf8000000-0xf82fffff] [ 5.109426] pci 0000:00:1c.0: PCI bridge to [bus 1c] [ 5.109430] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 5.109438] pci 0000:00:1c.0: bridge window [mem 0xf8300000-0xf84fffff] [ 5.109443] pci 0000:00:1c.0: bridge window [mem 0xf8500000-0xf86fffff 64bit pref] [ 5.109453] pci 0000:00:1c.5: PCI bridge to [bus 01] [ 5.109457] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff] [ 5.109464] pci 0000:00:1c.5: bridge window [mem 0xfb000000-0xfb0fffff] [ 5.109470] pci 0000:00:1c.5: bridge window [mem 0xf8700000-0xf88fffff 64bit pref] [ 5.109481] pci 0000:37:09.0: BAR 6: assigned [mem 0xfd020000-0xfd03ffff pref] [ 5.109482] pci 0000:00:1e.0: PCI bridge to [bus 37] [ 5.109486] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff] [ 5.109494] pci 0000:00:1e.0: bridge window [mem 0xfc000000-0xfd0fffff] [ 5.109508] pci_bus 0000:00: resource 4 [mem 0x000a0000-0x000bffff window] [ 5.109510] pci_bus 0000:00: resource 5 [mem 0xf8000000-0xfdffffff window] [ 5.109512] pci_bus 0000:00: resource 6 [mem 0xfed00000-0xfed003ff window] [ 5.109514] pci_bus 0000:00: resource 7 [mem 0xfed40000-0xfed44fff window] [ 5.109515] pci_bus 0000:00: resource 8 [io 0x0000-0x03af window] [ 5.109517] pci_bus 0000:00: resource 9 [io 0x03b0-0x03df window] [ 5.109519] pci_bus 0000:00: resource 10 [io 0x03e0-0x0cf7 window] [ 5.109521] pci_bus 0000:00: resource 11 [io 0x0d00-0x0fff window] [ 5.109522] pci_bus 0000:00: resource 12 [io 0x1000-0xefff window] [ 5.109524] pci_bus 0000:0f: resource 0 [io 0xc000-0xcfff] [ 5.109526] pci_bus 0000:0f: resource 1 [mem 0xf9000000-0xf92fffff] [ 5.109528] pci_bus 0000:10: resource 0 [io 0xc000-0xcfff] [ 5.109530] pci_bus 0000:10: resource 1 [mem 0xf9000000-0xf92fffff] [ 5.109532] pci_bus 0000:12: resource 0 [io 0xc000-0xcfff] [ 5.109534] pci_bus 0000:12: resource 1 [mem 0xf9200000-0xf92fffff] [ 5.109535] pci_bus 0000:13: resource 1 [mem 0xf9000000-0xf90fffff] [ 5.109537] pci_bus 0000:14: resource 1 [mem 0xf9100000-0xf91fffff] [ 5.109539] pci_bus 0000:28: resource 0 [io 0xd000-0xdfff] [ 5.109541] pci_bus 0000:28: resource 1 [mem 0xf8000000-0xf82fffff] [ 5.109543] pci_bus 0000:29: resource 0 [io 0xd000-0xdfff] [ 5.109544] pci_bus 0000:29: resource 1 [mem 0xf8000000-0xf82fffff] [ 5.109546] pci_bus 0000:2b: resource 0 [io 0xd000-0xdfff] [ 5.109548] pci_bus 0000:2b: resource 1 [mem 0xf8200000-0xf82fffff] [ 5.109550] pci_bus 0000:2c: resource 1 [mem 0xf8000000-0xf80fffff] [ 5.109551] pci_bus 0000:2d: resource 1 [mem 0xf8100000-0xf81fffff] [ 5.109553] pci_bus 0000:1c: resource 0 [io 0x1000-0x1fff] [ 5.109555] pci_bus 0000:1c: resource 1 [mem 0xf8300000-0xf84fffff] [ 5.109557] pci_bus 0000:1c: resource 2 [mem 0xf8500000-0xf86fffff 64bit pref] [ 5.109558] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 5.109560] pci_bus 0000:01: resource 1 [mem 0xfb000000-0xfb0fffff] [ 5.109562] pci_bus 0000:01: resource 2 [mem 0xf8700000-0xf88fffff 64bit pref] [ 5.109564] pci_bus 0000:37: resource 0 [io 0xe000-0xefff] [ 5.109565] pci_bus 0000:37: resource 1 [mem 0xfc000000-0xfd0fffff] [ 5.109567] pci_bus 0000:37: resource 4 [mem 0x000a0000-0x000bffff window] [ 5.109569] pci_bus 0000:37: resource 5 [mem 0xf8000000-0xfdffffff window] [ 5.109571] pci_bus 0000:37: resource 6 [mem 0xfed00000-0xfed003ff window] [ 5.109572] pci_bus 0000:37: resource 7 [mem 0xfed40000-0xfed44fff window] [ 5.109574] pci_bus 0000:37: resource 8 [io 0x0000-0x03af window] [ 5.109576] pci_bus 0000:37: resource 9 [io 0x03b0-0x03df window] [ 5.109578] pci_bus 0000:37: resource 10 [io 0x03e0-0x0cf7 window] [ 5.109579] pci_bus 0000:37: resource 11 [io 0x0d00-0x0fff window] [ 5.109581] pci_bus 0000:37: resource 12 [io 0x1000-0xefff window] [ 5.109623] NET: Registered protocol family 2 [ 5.109912] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 5.109983] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 5.110034] TCP: Hash tables configured (established 16384 bind 16384) [ 5.110077] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 5.110090] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 5.110183] NET: Registered protocol family 1 [ 5.110335] xen: registering gsi 20 triggering 0 polarity 1 [ 5.110358] xen: --> pirq=20 -> irq=20 (gsi=20) [ 5.110600] xen: registering gsi 21 triggering 0 polarity 1 [ 5.110609] xen: --> pirq=21 -> irq=21 (gsi=21) [ 5.110830] xen: registering gsi 22 triggering 0 polarity 1 [ 5.110838] xen: --> pirq=22 -> irq=22 (gsi=22) [ 5.111060] xen: registering gsi 22 triggering 0 polarity 1 [ 5.111063] Already setup the GSI :22 [ 5.111294] xen: registering gsi 20 triggering 0 polarity 1 [ 5.111297] Already setup the GSI :20 [ 5.111531] xen: registering gsi 21 triggering 0 polarity 1 [ 5.111534] Already setup the GSI :21 [ 5.111750] xen: registering gsi 22 triggering 0 polarity 1 [ 5.111752] Already setup the GSI :22 [ 5.111970] xen: registering gsi 20 triggering 0 polarity 1 [ 5.111973] Already setup the GSI :20 [ 5.112165] pci 0000:37:09.0: Video device with shadowed ROM [ 5.112271] PCI: CLS 64 bytes, default 64 [ 5.112332] Trying to unpack rootfs image as initramfs... [ 5.665740] Freeing initrd memory: 38152K (ffff880004000000 - ffff880006542000) [ 5.666492] FEATURE SPEC_CTRL Not Present [ 5.666494] FEATURE IBPB Not Present [ 5.666601] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 5.668728] futex hash table entries: 8192 (order: 7, 524288 bytes) [ 5.668805] Initialise system trusted keyring [ 5.668834] audit: initializing netlink subsys (disabled) [ 5.668861] audit: type=2000 audit(1583592186.227:1): initialized [ 5.670647] page_owner is disabled [ 5.670658] zpool: loaded [ 5.670660] zbud: loaded [ 5.671010] VFS: Disk quotas dquot_6.6.0 [ 5.671050] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 5.671082] hugetlbfs: disabling because there are no supported hugepage sizes [ 5.671182] Key type big_key registered [ 5.671185] SELinux: Registering netfilter hooks [ 5.673733] alg: No test for stdrng (krng) [ 5.673753] Key type asymmetric registered [ 5.673756] Asymmetric key parser 'x509' registered [ 5.673778] bounce: pool size: 64 pages [ 5.673788] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 5.673936] io scheduler noop registered [ 5.673939] io scheduler deadline registered (default) [ 5.673974] io scheduler cfq registered [ 5.674594] xen: registering gsi 21 triggering 0 polarity 1 [ 5.674606] Already setup the GSI :21 [ 5.676153] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 5.676169] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 5.676202] intel_idle: MWAIT substates: 0x1120 [ 5.676204] intel_idle: v0.4.1 model 0x2C [ 5.676210] intel_idle: intel_idle yielding to none [ 5.676287] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 5.676291] ACPI: Power Button [PBTN] [ 5.676322] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 5.676324] ACPI: Power Button [PWRF] [ 5.676531] Monitor-Mwait will be used to enter C-1 state [ 5.676557] Monitor-Mwait will be used to enter C-2 state [ 5.676577] Monitor-Mwait will be used to enter C-3 state [ 5.680626] Warning: Processor Platform Limit not supported. [ 5.680822] GHES: HEST is not enabled! [ 5.681024] xen_pciback: backend is vpci [ 5.683518] xen_acpi_processor: Uploading Xen processor PM info [ 5.684935] ACPI: Format specifies more objects [5] than exist in package [1]. [ 5.684936] xen_acpi_processor: Invalid _PSD data [ 5.685037] ACPI: Format specifies more objects [5] than exist in package [1]. [ 5.685038] xen_acpi_processor: Invalid _PSD data [ 5.685135] ACPI: Format specifies more objects [5] than exist in package [1]. [ 5.685136] xen_acpi_processor: Invalid _PSD data [ 5.685233] ACPI: Format specifies more objects [5] than exist in package [1]. [ 5.685234] xen_acpi_processor: Invalid _PSD data [ 5.685875] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 5.686455] hpet_acpi_add: no address or irqs in _CRS [ 5.686519] Non-volatile memory driver v1.3 [ 5.686563] Linux agpgart interface v0.103 [ 5.716458] tpm_tis 00:04: 1.2 TPM (device-id 0xB, rev-id 16) [ 5.867373] AMD IOMMUv2 driver by Joerg Roedel [ 5.867375] AMD IOMMUv2 functionality not available on this system [ 5.871067] brd: module loaded [ 5.872518] loop: module loaded [ 5.872621] libphy: Fixed MDIO Bus: probed [ 5.872627] MST:: : mst_init 896: Mellanox Technologies Software Tools Driver - version 2.0.0 [ 5.872686] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.872691] ehci-pci: EHCI PCI platform driver [ 5.872813] xen: registering gsi 22 triggering 0 polarity 1 [ 5.872817] Already setup the GSI :22 [ 5.872864] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 5.872920] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 5.872938] ehci-pci 0000:00:1a.7: debug port 1 [ 5.876868] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported [ 5.876890] ehci-pci 0000:00:1a.7: irq 22, io mem 0xfa004800 [ 5.882433] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 5.882499] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 5.882501] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.882503] usb usb1: Product: EHCI Host Controller [ 5.882506] usb usb1: Manufacturer: Linux 4.1.12-124.21.1.el6uek.x86_64 ehci_hcd [ 5.882508] usb usb1: SerialNumber: 0000:00:1a.7 [ 5.882627] hub 1-0:1.0: USB hub found [ 5.882636] hub 1-0:1.0: 6 ports detected [ 5.882871] xen: registering gsi 20 triggering 0 polarity 1 [ 5.882875] Already setup the GSI :20 [ 5.882910] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 5.882964] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 5.882982] ehci-pci 0000:00:1d.7: debug port 1 [ 5.886908] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported [ 5.886927] ehci-pci 0000:00:1d.7: irq 20, io mem 0xfa004c00 [ 5.892433] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 5.892489] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 5.892491] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.892493] usb usb2: Product: EHCI Host Controller [ 5.892495] usb usb2: Manufacturer: Linux 4.1.12-124.21.1.el6uek.x86_64 ehci_hcd [ 5.892496] usb usb2: SerialNumber: 0000:00:1d.7 [ 5.892600] hub 2-0:1.0: USB hub found [ 5.892607] hub 2-0:1.0: 6 ports detected [ 5.892737] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 5.892743] ohci-pci: OHCI PCI platform driver [ 5.892759] uhci_hcd: USB Universal Host Controller Interface driver [ 5.892877] xen: registering gsi 20 triggering 0 polarity 1 [ 5.892881] Already setup the GSI :20 [ 5.892898] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 5.892953] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 5.892962] uhci_hcd 0000:00:1a.0: detected 2 ports [ 5.892989] uhci_hcd 0000:00:1a.0: irq 20, io base 0x0000b000 [ 5.893064] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.893066] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.893068] usb usb3: Product: UHCI Host Controller [ 5.893069] usb usb3: Manufacturer: Linux 4.1.12-124.21.1.el6uek.x86_64 uhci_hcd [ 5.893071] usb usb3: SerialNumber: 0000:00:1a.0 [ 5.893172] hub 3-0:1.0: USB hub found [ 5.893180] hub 3-0:1.0: 2 ports detected [ 5.893366] xen: registering gsi 21 triggering 0 polarity 1 [ 5.893370] Already setup the GSI :21 [ 5.893387] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 5.893459] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 5.893468] uhci_hcd 0000:00:1a.1: detected 2 ports [ 5.893508] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b020 [ 5.893581] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.893583] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.893585] usb usb4: Product: UHCI Host Controller [ 5.893587] usb usb4: Manufacturer: Linux 4.1.12-124.21.1.el6uek.x86_64 uhci_hcd [ 5.893589] usb usb4: SerialNumber: 0000:00:1a.1 [ 5.893696] hub 4-0:1.0: USB hub found [ 5.893703] hub 4-0:1.0: 2 ports detected [ 5.893893] xen: registering gsi 22 triggering 0 polarity 1 [ 5.893897] Already setup the GSI :22 [ 5.893914] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 5.893969] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 5.893978] uhci_hcd 0000:00:1a.2: detected 2 ports [ 5.894004] uhci_hcd 0000:00:1a.2: irq 22, io base 0x0000b040 [ 5.894077] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.894079] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.894081] usb usb5: Product: UHCI Host Controller [ 5.894083] usb usb5: Manufacturer: Linux 4.1.12-124.21.1.el6uek.x86_64 uhci_hcd [ 5.894084] usb usb5: SerialNumber: 0000:00:1a.2 [ 5.894187] hub 5-0:1.0: USB hub found [ 5.894194] hub 5-0:1.0: 2 ports detected [ 5.894383] xen: registering gsi 20 triggering 0 polarity 1 [ 5.894388] Already setup the GSI :20 [ 5.894416] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 5.894469] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 5.894478] uhci_hcd 0000:00:1d.0: detected 2 ports [ 5.894504] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000b060 [ 5.894578] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.894580] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.894582] usb usb6: Product: UHCI Host Controller [ 5.894584] usb usb6: Manufacturer: Linux 4.1.12-124.21.1.el6uek.x86_64 uhci_hcd [ 5.894585] usb usb6: SerialNumber: 0000:00:1d.0 [ 5.894685] hub 6-0:1.0: USB hub found [ 5.894692] hub 6-0:1.0: 2 ports detected [ 5.894882] xen: registering gsi 21 triggering 0 polarity 1 [ 5.894886] Already setup the GSI :21 [ 5.894903] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 5.894955] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 5.894964] uhci_hcd 0000:00:1d.1: detected 2 ports [ 5.894990] uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000b080 [ 5.895064] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.895066] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.895068] usb usb7: Product: UHCI Host Controller [ 5.895069] usb usb7: Manufacturer: Linux 4.1.12-124.21.1.el6uek.x86_64 uhci_hcd [ 5.895071] usb usb7: SerialNumber: 0000:00:1d.1 [ 5.895172] hub 7-0:1.0: USB hub found [ 5.895179] hub 7-0:1.0: 2 ports detected [ 5.895371] xen: registering gsi 22 triggering 0 polarity 1 [ 5.895375] Already setup the GSI :22 [ 5.895394] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 5.895457] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 5.895466] uhci_hcd 0000:00:1d.2: detected 2 ports [ 5.895493] uhci_hcd 0000:00:1d.2: irq 22, io base 0x0000b0a0 [ 5.895567] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.895569] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.895570] usb usb8: Product: UHCI Host Controller [ 5.895572] usb usb8: Manufacturer: Linux 4.1.12-124.21.1.el6uek.x86_64 uhci_hcd [ 5.895574] usb usb8: SerialNumber: 0000:00:1d.2 [ 5.895673] hub 8-0:1.0: USB hub found [ 5.895680] hub 8-0:1.0: 2 ports detected [ 5.895813] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 [ 5.898461] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 5.898467] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 5.898558] mousedev: PS/2 mouse device common for all mice [ 5.898847] rtc_cmos 00:00: RTC can wake from S4 [ 5.899054] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 [ 5.899094] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram [ 5.899349] hidraw: raw HID events driver (C) Jiri Kosina [ 5.899547] usbcore: registered new interface driver usbhid [ 5.899549] usbhid: USB HID core driver [ 5.899615] drop_monitor: Initializing network drop monitor service [ 5.899689] gre: GRE over IPv4 demultiplexor driver [ 5.899698] Initializing XFRM netlink socket [ 5.899704] NET: Registered protocol family 17 [ 5.900144] mce: Unable to init device /dev/mcelog (rc: -16) [ 5.900580] Loading compiled-in X.509 certificates [ 5.901438] Loaded X.509 cert 'Oracle America, Inc.: Ksplice Kernel Module Signing Key: 09010ebef5545fa7c54b626ef518e077b5b1ee4c' [ 5.902274] Loaded X.509 cert 'Oracle Linux Kernel Module Signing Key: 2bb352412969a3653f0eb6021763408ebb9bb5ab' [ 5.903113] Loaded X.509 cert 'Oracle CA Server: b59275a22dae18b9ab5f7ac4c816fab6c5f0bf9b' [ 5.903128] registered taskstats version 1 [ 6.184431] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 6.281503] rtc_cmos 00:00: setting system clock to 2020-03-07 14:43:06 UTC (1583592186) [ 6.282426] Freeing unused kernel memory: 1988K (ffffffff81c6d000 - ffffffff81e5e000) [ 6.302590] usb 1-1: New USB device found, idVendor=0781, idProduct=5583 [ 6.302593] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 6.302595] usb 1-1: Product: Ultra Fit [ 6.302597] usb 1-1: Manufacturer: SanDisk [ 6.302598] usb 1-1: SerialNumber: 4C530000180630114050 [ 6.308295] dracut: dracut-004-409.0.7.el6_8.2 [ 6.320440] dracut: rd_NO_LUKS: removing cryptoluks activation [ 6.322167] dracut: rd_NO_LVM: removing LVM activation [ 6.349957] device-mapper: uevent: version 1.0.3 [ 6.350048] device-mapper: ioctl: 4.31.0-ioctl (2015-3-12) initialised: dm-devel@redhat.com [ 6.367096] udev: starting version 147 [ 6.466305] wmi: Mapper loaded [ 6.484772] random: nonblocking pool is initialized [ 6.665431] clocksource tsc: mask: 0xffffffffffffffff max_cycles: 0x2c18405b7f4, max_idle_ns: 440795289991 ns [ 7.665593] Switched to clocksource tsc [ 9.526515] floppy0: no floppy controllers found [ 9.619564] dracut: Starting plymouth daemon [ 9.645256] dracut: rd_NO_DM: removing DM RAID activation [ 9.649274] dracut: rd_NO_MD: removing MD RAID activation [ 9.689603] Loading iSCSI transport class v2.0-870. [ 9.700236] iscsi: registered transport (qla4xxx) [ 9.700274] QLogic iSCSI HBA Driver [ 9.722784] IPv6: Loaded, but administratively disabled, reboot required to enable [ 9.725642] libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits. [ 9.725644] libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0. [ 9.727750] Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010) [ 9.727782] iscsi: registered transport (cxgb3i) [ 9.738222] Chelsio T4/T5 iSCSI Driver cxgb4i v0.9.4 [ 9.738250] iscsi: registered transport (cxgb4i) [ 9.742853] cnic: QLogic cnicDriver v2.5.22 (July 20, 2015) [ 9.745507] QLogic NetXtreme II iSCSI Driver bnx2i v2.7.10.1 (Jul 16, 2014) [ 9.745526] iscsi: registered transport (bnx2i) [ 9.749790] ahci 0000:00:1f.2: version 3.0 [ 9.749933] xen: registering gsi 18 triggering 0 polarity 1 [ 9.749960] xen: --> pirq=18 -> irq=18 (gsi=18) [ 9.749996] ahci 0000:00:1f.2: controller can't do SNTF, turning off CAP_SNTF [ 9.750133] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl RAID mode [ 9.750138] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pmp pio slum part ccc sxs [ 9.750892] scsi host0: ahci [ 9.751108] scsi host1: ahci [ 9.751133] iscsi: registered transport (be2iscsi) [ 9.751135] In beiscsi_module_init, tt=ffffffffa0280100 [ 9.751269] scsi host2: ahci [ 9.751425] scsi host3: ahci [ 9.751541] scsi host4: ahci [ 9.751665] scsi host5: ahci [ 9.751707] ata1: SATA max UDMA/133 abar m2048@0xfa004000 port 0xfa004100 irq 202 [ 9.751709] ata2: SATA max UDMA/133 abar m2048@0xfa004000 port 0xfa004180 irq 202 [ 9.751711] ata3: SATA max UDMA/133 abar m2048@0xfa004000 port 0xfa004200 irq 202 [ 9.751713] ata4: SATA max UDMA/133 abar m2048@0xfa004000 port 0xfa004280 irq 202 [ 9.751715] ata5: SATA max UDMA/133 abar m2048@0xfa004000 port 0xfa004300 irq 202 [ 9.751717] ata6: SATA max UDMA/133 abar m2048@0xfa004000 port 0xfa004380 irq 202 [ 9.751785] xen: registering gsi 36 triggering 0 polarity 1 [ 9.751799] xen: --> pirq=36 -> irq=36 (gsi=36) [ 9.762500] ahci 0000:12:00.0: AHCI 0001.0000 32 slots 4 ports 6 Gbps 0xf impl SATA mode [ 9.762504] ahci 0000:12:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs [ 9.763060] scsi host6: ahci [ 9.763243] scsi host7: ahci [ 9.763471] scsi host8: ahci [ 9.763642] scsi host9: ahci [ 9.763718] ata7: SATA max UDMA/133 abar m2048@0xf9200000 port 0xf9200100 irq 203 [ 9.763721] ata8: SATA max UDMA/133 abar m2048@0xf9200000 port 0xf9200180 irq 203 [ 9.763723] ata9: SATA max UDMA/133 abar m2048@0xf9200000 port 0xf9200200 irq 203 [ 9.763725] ata10: SATA max UDMA/133 abar m2048@0xf9200000 port 0xf9200280 irq 203 [ 9.763793] xen: registering gsi 38 triggering 0 polarity 1 [ 9.763806] xen: --> pirq=38 -> irq=38 (gsi=38) [ 9.774507] ahci 0000:2b:00.0: AHCI 0001.0000 32 slots 4 ports 6 Gbps 0xf impl SATA mode [ 9.774516] ahci 0000:2b:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs [ 9.775051] scsi host10: ahci [ 9.775241] scsi host11: ahci [ 9.775423] scsi host12: ahci [ 9.775616] scsi host13: ahci [ 9.775660] ata11: SATA max UDMA/133 abar m2048@0xf8200000 port 0xf8200100 irq 204 [ 9.775663] ata12: SATA max UDMA/133 abar m2048@0xf8200000 port 0xf8200180 irq 204 [ 9.775665] ata13: SATA max UDMA/133 abar m2048@0xf8200000 port 0xf8200200 irq 204 [ 9.775667] ata14: SATA max UDMA/133 abar m2048@0xf8200000 port 0xf8200280 irq 204 [ 10.056520] ata4: SATA link down (SStatus 0 SControl 300) [ 10.056560] ata5: SATA link down (SStatus 0 SControl 300) [ 10.056579] ata3: SATA link down (SStatus 0 SControl 300) [ 10.056597] ata6: SATA link down (SStatus 0 SControl 300) [ 10.056614] ata2: SATA link down (SStatus 0 SControl 300) [ 10.068514] ata10: SATA link down (SStatus 0 SControl 300) [ 10.068544] ata9: SATA link down (SStatus 0 SControl 300) [ 10.068568] ata7: SATA link down (SStatus 0 SControl 300) [ 10.068591] ata8: SATA link down (SStatus 0 SControl 300) [ 10.080512] ata14: SATA link down (SStatus 0 SControl 300) [ 10.080543] ata12: SATA link down (SStatus 0 SControl 300) [ 10.080566] ata13: SATA link down (SStatus 0 SControl 300) [ 10.080588] ata11: SATA link down (SStatus 0 SControl 300) [ 10.211525] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 10.214364] ata1.00: ATAPI: HL-DT-ST BD-RE WH16NS40, 1.00, max UDMA/100 [ 10.215163] ata1.00: configured for UDMA/100 [ 10.219788] scsi 0:0:0:0: CD-ROM HL-DT-ST BD-RE WH16NS40 1.00 PQ: 0 ANSI: 5 [ 10.244598] nvme nvme0: pci function 0000:13:00.0 [ 10.244664] nvme nvme1: pci function 0000:14:00.0 [ 10.244680] xen: registering gsi 24 triggering 0 polarity 1 [ 10.244702] xen: --> pirq=24 -> irq=24 (gsi=24) [ 10.244728] xen: registering gsi 34 triggering 0 polarity 1 [ 10.244732] nvme nvme2: pci function 0000:2c:00.0 [ 10.244741] xen: --> pirq=34 -> irq=34 (gsi=34) [ 10.244809] xen: registering gsi 30 triggering 0 polarity 1 [ 10.244928] xen: --> pirq=30 -> irq=30 (gsi=30) [ 10.244936] nvme nvme3: pci function 0000:2d:00.0 [ 10.245050] xen: registering gsi 37 triggering 0 polarity 1 [ 10.245156] xen: --> pirq=37 -> irq=37 (gsi=37) [ 10.277770] pps_core: LinuxPPS API ver. 1 registered [ 10.277772] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 10.279315] PTP clock support registered [ 10.282959] tg3.c:v3.137 (May 11, 2014) [ 10.283018] xen: registering gsi 17 triggering 0 polarity 1 [ 10.283035] xen: --> pirq=17 -> irq=17 (gsi=17) [ 10.307112] tg3 0000:01:00.0 eth0: Tigon3 [partno(BCM95754) rev 5784100] (PCI Express) MAC address 24:be:05:03:fa:14 [ 10.307115] tg3 0000:01:00.0 eth0: attached PHY is 5784 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) [ 10.307118] tg3 0000:01:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 10.307120] tg3 0000:01:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 10.335516] usb-storage 1-1:1.0: USB Mass Storage device detected [ 10.335735] scsi host14: usb-storage 1-1:1.0 [ 10.335800] usbcore: registered new interface driver usb-storage [ 10.349361] nvme1n1: p1 [ 10.349636] nvme2n1: p1 [ 10.350086] nvme3n1: p1 [ 10.350121] nvme0n1: p1 [ 10.502361] xen: registering gsi 19 triggering 0 polarity 1 [ 10.502387] xen: --> pirq=19 -> irq=19 (gsi=19) [ 10.553566] firewire_ohci 0000:37:05.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0 [ 10.585165] sr 0:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 10.585170] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 10.585316] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 11.053625] firewire_core 0000:37:05.0: created device fw0: GUID 0060b000008e2676, S400 [ 11.337005] scsi 14:0:0:0: Direct-Access SanDisk Ultra Fit 1.00 PQ: 0 ANSI: 6 [ 13.646644] floppy0: no floppy controllers found [ 13.676613] sd 14:0:0:0: [sda] 60063744 512-byte logical blocks: (30.7 GB/28.6 GiB) [ 13.687730] sd 14:0:0:0: [sda] Write Protect is off [ 13.687735] sd 14:0:0:0: [sda] Mode Sense: 43 00 00 00 [ 13.690856] sd 14:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 13.708971] sda: sda1 sda2 sda3 [ 13.712365] sd 14:0:0:0: [sda] Attached SCSI removable disk [ 14.182357] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 14.204302] dracut: Mounted root filesystem /dev/sda2 [ 14.462726] SELinux: Disabled at runtime. [ 14.462747] SELinux: Unregistering netfilter hooks [ 14.489632] audit: type=1404 audit(1583592194.707:2): selinux=0 auid=4294967295 ses=4294967295 [ 14.496008] dracut: [ 14.681514] dracut: Switching root [ 15.396793] udev: starting version 147 [ 16.817752] EDAC MC: Ver: 3.0.0 [ 16.822611] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:3f:03.0 (POLLED) [ 16.822646] EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:3f:03.0 (POLLED) [ 16.822930] EDAC MC1: Giving out device to module i7core_edac.c controller i7 core #1: DEV 0000:3e:03.0 (POLLED) [ 16.822947] EDAC PCI1: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:3e:03.0 (POLLED) [ 16.823076] EDAC i7core: Driver loaded, 2 memory controller(s) found. [ 16.985573] xen: registering gsi 21 triggering 0 polarity 1 [ 16.985586] Already setup the GSI :21 [ 17.018259] snd_hda_codec_realtek hdaudioC0D0: ALC262: SKU not ready 0x411111f0 [ 17.018671] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC262: line_outs=1 (0x15/0x0/0x0/0x0/0x0) type:line [ 17.018674] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=1 (0x16/0x0/0x0/0x0/0x0) [ 17.018676] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 17.018678] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 17.018679] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 17.018682] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 17.018684] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 17.018686] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 17.029132] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5 [ 17.029499] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 17.029580] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 17.029632] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 17.029649] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 17.029709] sd 14:0:0:0: Attached scsi generic sg1 type 0 [ 17.029727] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 17.029837] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 17.186133] input: PC Speaker as /devices/platform/pcspkr/input/input11 [ 17.286531] input: HP WMI hotkeys as /devices/virtual/input/input12 [ 17.351796] iTCO_vendor_support: vendor-support=0 [ 17.358002] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 17.358024] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS [ 17.498741] parport_pc parport_pc.956: Unable to set coherent dma mask: disabling DMA [ 17.498801] parport_pc parport_pc.888: Unable to set coherent dma mask: disabling DMA [ 17.498865] parport_pc parport_pc.632: Unable to set coherent dma mask: disabling DMA [ 20.543782] floppy0: no floppy controllers found [ 20.582920] ppdev: user-space parallel port driver [ 20.663487] device-mapper: multipath: version 1.9.0 loaded [ 21.041846] EXT4-fs (sda2): re-mounted. Opts: (null) [ 21.209410] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 21.446547] Adding 5903356k swap on /dev/sda3. Priority:-1 extents:1 across:5903356k FS [ 25.415566] tg3 0000:01:00.0 eth0: Link is up at 1000 Mbps, full duplex [ 25.415570] tg3 0000:01:00.0 eth0: Flow control is on for TX and on for RX [ 31.179098] audit: type=1305 audit(1583613811.396:3): audit_pid=2047 old=0 auid=4294967295 ses=4294967295 res=1 [ 32.636860] RPC: Registered named UNIX socket transport module. [ 32.636863] RPC: Registered udp transport module. [ 32.636864] RPC: Registered tcp transport module. [ 32.636865] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 32.887283] bnx2fc: QLogic FCoE Driver bnx2fc v2.10.3 (October 15, 2015) [ 34.262792] xen:xen_evtchn: Event-channel device installed [ 86.031597] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [root@vhost0 ~]# dmesg > dmesg.out [root@vhost0 ~]# parted GNU Parted 2.1 Using /dev/sda Welcome to GNU Parted! Type 'help' to view a list of commands. (parted) p Model: SanDisk Ultra Fit (scsi) Disk /dev/sda: 30.8GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 525MB 524MB primary ext4 boot 2 525MB 24.7GB 24.2GB primary ext4 3 24.7GB 30.8GB 6045MB primary linux-swap(v1) (parted) q [root@vhost0 ~]# parted /dev/nvme nvme0 nvme0n1 nvme0n1p1 nvme1 nvme1n1 nvme1n1p1 nvme2 nvme2n1 nvme2n1p1 nvme3 nvme3n1 nvme3n1p1 [root@vhost0 ~]# parted /dev/nvme0n1 GNU Parted 2.1 Using /dev/nvme0n1 Welcome to GNU Parted! Type 'help' to view a list of commands. (parted) p Model: Unknown (unknown) Disk /dev/nvme0n1: 2048GB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 2048GB 2048GB raid (parted) resizepart 1 -1 align-check TYPE N check partition N for TYPE(min|opt) alignment check NUMBER do a simple check on the file system cp [FROM-DEVICE] FROM-NUMBER TO-NUMBER copy file system to another partition help [COMMAND] print general help, or help on COMMAND mklabel,mktable LABEL-TYPE create a new disklabel (partition table) mkfs NUMBER FS-TYPE make a FS-TYPE file system on partition NUMBER mkpart PART-TYPE [FS-TYPE] START END make a partition mkpartfs PART-TYPE FS-TYPE START END make a partition with a file system move NUMBER START END move partition NUMBER name NUMBER NAME name partition NUMBER as NAME print [devices|free|list,all|NUMBER] display the partition table, available devices, free space, all found partitions, or a particular partition quit exit program rescue START END rescue a lost partition near START and END resize NUMBER START END resize partition NUMBER and its file system rm NUMBER delete partition NUMBER select DEVICE choose the device to edit set NUMBER FLAG STATE change the FLAG on partition NUMBER toggle [NUMBER [FLAG]] toggle the state of FLAG on partition NUMBER unit UNIT set the default unit to UNIT version display the version number and copyright information of GNU Parted align-check TYPE N check partition N for TYPE(min|opt) alignment check NUMBER do a simple check on the file system cp [FROM-DEVICE] FROM-NUMBER TO-NUMBER copy file system to another partition help [COMMAND] print general help, or help on COMMAND mklabel,mktable LABEL-TYPE create a new disklabel (partition table) mkfs NUMBER FS-TYPE make a FS-TYPE file system on partition NUMBER mkpart PART-TYPE [FS-TYPE] START END make a partition mkpartfs PART-TYPE FS-TYPE START END make a partition with a file system move NUMBER START END move partition NUMBER name NUMBER NAME name partition NUMBER as NAME print [devices|free|list,all|NUMBER] display the partition table, available devices, free space, all found partitions, or a particular partition quit exit program rescue START END rescue a lost partition near START and END resize NUMBER START END resize partition NUMBER and its file system rm NUMBER delete partition NUMBER select DEVICE choose the device to edit set NUMBER FLAG STATE change the FLAG on partition NUMBER toggle [NUMBER [FLAG]] toggle the state of FLAG on partition NUMBER unit UNIT set the default unit to UNIT version display the version number and copyright information of GNU Parted align-check TYPE N check partition N for TYPE(min|opt) alignment check NUMBER do a simple check on the file system cp [FROM-DEVICE] FROM-NUMBER TO-NUMBER copy file system to another partition help [COMMAND] print general help, or help on COMMAND mklabel,mktable LABEL-TYPE create a new disklabel (partition table) mkfs NUMBER FS-TYPE make a FS-TYPE file system on partition NUMBER mkpart PART-TYPE [FS-TYPE] START END make a partition mkpartfs PART-TYPE FS-TYPE START END make a partition with a file system move NUMBER START END move partition NUMBER name NUMBER NAME name partition NUMBER as NAME print [devices|free|list,all|NUMBER] display the partition table, available devices, free space, all found partitions, or a particular partition quit exit program rescue START END rescue a lost partition near START and END resize NUMBER START END resize partition NUMBER and its file system rm NUMBER delete partition NUMBER select DEVICE choose the device to edit set NUMBER FLAG STATE change the FLAG on partition NUMBER toggle [NUMBER [FLAG]] toggle the state of FLAG on partition NUMBER unit UNIT set the default unit to UNIT version display the version number and copyright information of GNU Parted (parted) resize 1 -1 WARNING: you are attempting to use parted to operate on (resize) a file system. parted's file system manipulation code is not as robust as what you'll find in dedicated, file-system-specific packages like e2fsprogs. We recommend you use parted only to manipulate partition tables, whenever possible. Support for performing most operations on most types of file systems will be removed in an upcoming release. End? [2048GB]? Error: Could not detect file system. (parted) type align-check TYPE N check partition N for TYPE(min|opt) alignment check NUMBER do a simple check on the file system cp [FROM-DEVICE] FROM-NUMBER TO-NUMBER copy file system to another partition help [COMMAND] print general help, or help on COMMAND mklabel,mktable LABEL-TYPE create a new disklabel (partition table) mkfs NUMBER FS-TYPE make a FS-TYPE file system on partition NUMBER mkpart PART-TYPE [FS-TYPE] START END make a partition mkpartfs PART-TYPE FS-TYPE START END make a partition with a file system move NUMBER START END move partition NUMBER name NUMBER NAME name partition NUMBER as NAME print [devices|free|list,all|NUMBER] display the partition table, available devices, free space, all found partitions, or a particular partition quit exit program rescue START END rescue a lost partition near START and END resize NUMBER START END resize partition NUMBER and its file system rm NUMBER delete partition NUMBER select DEVICE choose the device to edit set NUMBER FLAG STATE change the FLAG on partition NUMBER toggle [NUMBER [FLAG]] toggle the state of FLAG on partition NUMBER unit UNIT set the default unit to UNIT version display the version number and copyright information of GNU Parted (parted) print devices /dev/nvme0n1 (2048GB) /dev/sda (30.8GB) /dev/nvme1n1 (2048GB) /dev/nvme2n1 (2048GB) /dev/nvme3n1 (2048GB) (parted) q [root@vhost0 ~]# parted /dev/nvme0n1 GNU Parted 2.1 Using /dev/nvme0n1 Welcome to GNU Parted! Type 'help' to view a list of commands. (parted) mklabel gpt Warning: The existing disk label on /dev/nvme0n1 will be destroyed and all data on this disk will be lost. Do you want to continue? Yes/No? y Yes ^C ^Z ~. Connection to vhost0 closed. ✘ ────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────── [2020-03-07 14:59.41] ~ [jdavis.JoshD6860] ➤ ssh vhost0 -l root X11 forwarding request failed on channel 0 Last login: Sat Mar 7 14:44:07 2020 from joshd6860.omnitech.int Warning: making manual modifications in the management domain might cause inconsistencies between Oracle VM Manager and the server. [root@vhost0 ~]# ps auxww | grep mkpart root 13822 0.0 0.1 103384 2120 pts/0 S+ 14:59 0:00 grep mkpart [root@vhost0 ~]# mkpart /dev/nvme0n1 -bash: mkpart: command not found [root@vhost0 ~]# parted /dev/nvme0n1 ^C Connection to vhost0 closed. ✘ ────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────── [2020-03-07 15:00.18] ~ [jdavis.JoshD6860] ➤ ssh vhost0 -l root X11 forwarding request failed on channel 0 Last login: Sat Mar 7 14:59:43 2020 from joshd6860.omnitech.int Warning: making manual modifications in the management domain might cause inconsistencies between Oracle VM Manager and the server. [root@vhost0 ~]# dmesg [ 0.000000] PAT configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.1.12-124.21.1.el6uek.x86_64 (mockbuild@ca-build84.us.oracle.com) (gcc version 4.9.2 20150212 (Red Hat 4.9.2-6.2.0.3) (GCC) ) #2 SMP Tue Nov 6 13:31:13 PST 2018 [ 0.000000] Command line: placeholder root=UUID=9bcba43f-a6b8-45d4-a58e-7335931f88da ro rd_NO_LUKS rd_NO_LVM LANG=en_US.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rhgb quiet [ 0.000000] Released 0 page(s) [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000094fff] usable [ 0.000000] Xen: [mem 0x0000000000095800-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x000000004f86afff] usable [ 0.000000] Xen: [mem 0x00000000eefa5800-0x00000000f3ffffff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fed3ffff] reserved [ 0.000000] Xen: [mem 0x00000000fed45000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Hewlett-Packard HP Z600 Workstation/0B54h, BIOS 786G4 v03.60 02/24/2016 [ 0.000000] Hypervisor detected: Xen [ 0.000000] Kernel/User page tables isolation: disabled [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] AGP: No AGP bridge found [ 0.000000] e820: last_pfn = 0x4f86b max_arch_pfn = 0x400000000 [ 0.000000] Base memory trampoline at [ffff88000008e000] 8e000 size 28672 [ 0.000000] BRK [0x02158000, 0x02158fff] PGTABLE [ 0.000000] BRK [0x02159000, 0x02159fff] PGTABLE [ 0.000000] BRK [0x0215a000, 0x0215afff] PGTABLE [ 0.000000] BRK [0x0215b000, 0x0215bfff] PGTABLE [ 0.000000] BRK [0x0215c000, 0x0215cfff] PGTABLE [ 0.000000] BRK [0x0215d000, 0x0215dfff] PGTABLE [ 0.000000] RAMDISK: [mem 0x04000000-0x06541fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000E9010 000024 (v02 HPQOEM) [ 0.000000] ACPI: XSDT 0x00000000EEFB88E8 000074 (v01 HPQOEM SLIC-WKS 20160224 00000000) [ 0.000000] ACPI: FACP 0x00000000EEFB8A88 0000F4 (v03 HPQOEM TYLSBURG 00000001 00000000) [ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aEventBlock: 32/16 (20150410/tbfadt-623) [ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20150410/tbfadt-623) [ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aEventBlock: 16, using default 32 (20150410/tbfadt-704) [ 0.000000] ACPI: DSDT 0x00000000EEFB941B 00A674 (v01 COMPAQ DSDT_PRJ 00000001 MSFT 0100000E) [ 0.000000] ACPI: FACS 0x00000000EEFB8800 000040 [ 0.000000] ACPI: FACS 0x00000000EEFB8800 000040 [ 0.000000] ACPI: APIC 0x00000000EEFB8B7C 000188 (v01 HPQOEM TYLSBURG 00000001 00000000) [ 0.000000] ACPI: ASF! 0x00000000EEFB8D04 000063 (v32 HPQOEM TYLSBURG 00000001 00000000) [ 0.000000] ACPI: MCFG 0x00000000EEFB8D67 00003C (v01 HPQOEM TYLSBURG 00000001 00000000) [ 0.000000] ACPI: TCPA 0x00000000EEFB8DA3 000032 (v01 HPQOEM TYLSBURG 00000001 00000000) [ 0.000000] ACPI: SLIC 0x00000000EEFB8DD5 000176 (v01 HPQOEM SLIC-WKS 00000001 00000000) [ 0.000000] ACPI: HPET 0x00000000EEFB8F4B 000038 (v01 HPQOEM TYLSBURG 00000001 00000000) [ 0.000000] ACPI: XMAR 0x00000000EEFB8F83 000170 (v01 HPQOEM TYLSBURG 00000001 00000000) [ 0.000000] ACPI: SRAT 0x00000000EEFB9123 0002F8 (v02 HPQOEM TYLSBURG 00000001 00000000) [ 0.000000] ACPI: SSDT 0x00000000EEFC4E11 0075FC (v01 INTEL PPM RCM 80000001 INTL 20061109) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Setting APIC routing to Xen PV. [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000004f86afff] [ 0.000000] NODE_DATA(0) allocated [mem 0x4f573000-0x4f599fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x000000004f86afff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000094fff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000004f86afff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000004f86afff] [ 0.000000] On node 0 totalpages: 325631 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 22 pages reserved [ 0.000000] DMA zone: 3988 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 5026 pages used for memmap [ 0.000000] DMA32 zone: 321643 pages, LIFO batch:31 [ 0.000000] p2m virtual area at ffffc90000000000, size is 400000 [ 0.000000] Remapped 107 page(s) [ 0.000000] ACPI: PM-Timer IO Port: 0xf808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] IOAPIC[1]: apic_id 2, version 32, address 0xfec10000, GSI 24-47 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] smpboot: Allowing 32 CPUs, 8 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00095000-0x00095fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00096000-0x000fffff] [ 0.000000] e820: [mem 0x4f86b000-0xeefa57ff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 4.4.4OVM (preserve-AD) [ 0.000000] clocksource refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 35 pages/cpu @ffff88004d000000 s104536 r8192 d30632 u262144 [ 0.000000] pcpu-alloc: s104536 r8192 d30632 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 [ 0.000000] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31 [ 0.000000] xen: PV spinlocks enabled [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 320519 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: placeholder root=UUID=9bcba43f-a6b8-45d4-a58e-7335931f88da ro rd_NO_LUKS rd_NO_LVM LANG=en_US.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rhgb quiet [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] software IO TLB [mem 0x49000000-0x4d000000] (64MB) mapped at [ffff880049000000-ffff88004cffffff] [ 0.000000] Memory: 1149992K/1302524K available (7148K kernel code, 1654K rwdata, 3900K rodata, 1988K init, 3012K bss, 152532K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=20, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=20. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=20 [ 0.000000] NR_IRQS:524544 nr_irqs:992 16 [ 0.000000] xen:events: Using FIFO-based ABI [ 0.000000] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.000000] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.000000] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.000000] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.000000] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.000000] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.000000] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.000000] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.000000] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.000000] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.000000] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.000000] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.000000] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.000000] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.000000] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-19. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000000] Xen: using vcpuop timer interface [ 0.000000] installing Xen timer for CPU 0 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3058.885 MHz processor [ 4.939039] Calibrating delay loop (skipped), value calculated using timer frequency.. 6118.14 BogoMIPS (lpj=3059072) [ 4.939041] pid_max: default: 32768 minimum: 301 [ 4.939050] ACPI: Core revision 20150410 [ 4.969044] ACPI: All ACPI Tables successfully acquired [ 4.969364] Security Framework initialized [ 4.969371] SELinux: Initializing. [ 4.969379] SELinux: Starting in permissive mode [ 4.969727] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 4.970188] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 4.970345] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 4.970353] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 4.970623] Initializing cgroup subsys blkio [ 4.970627] Initializing cgroup subsys memory [ 4.970637] Initializing cgroup subsys devices [ 4.970640] Initializing cgroup subsys freezer [ 4.970643] Initializing cgroup subsys net_cls [ 4.970647] Initializing cgroup subsys perf_event [ 4.970651] Initializing cgroup subsys net_prio [ 4.970653] Initializing cgroup subsys hugetlb [ 4.970704] FEATURE SPEC_CTRL Not Present [ 4.970704] FEATURE IBPB Not Present [ 4.970724] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 4.970725] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 4.970729] mce: CPU supports 2 MCE banks [ 4.970747] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7 [ 4.970748] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 4.970752] Spectre V2 : Options: retpoline [ 4.971139] Spectre V2 : Mitigation: Full generic retpoline [ 4.971140] Spectre V2 : Filling RSB on context switch [ 4.971142] Speculative Store Bypass: Vulnerable [ 4.971392] Freeing SMP alternatives memory: 28K (ffffffff81e5e000 - ffffffff81e65000) [ 4.974748] ftrace: allocating 27423 entries in 108 pages [ 4.998056] cpu 0 spinlock event irq 49 [ 4.998068] VPMU disabled by hypervisor. [ 5.015200] Performance Events: unsupported p6 CPU model 44 no PMU driver, software events only. [ 5.016162] NMI watchdog: disabled (cpu0): hardware events not enabled [ 5.016164] NMI watchdog: Shutting down hard lockup detector on all cpus [ 5.016307] installing Xen timer for CPU 1 [ 5.016321] cpu 1 spinlock event irq 56 [ 5.016761] installing Xen timer for CPU 2 [ 5.016775] cpu 2 spinlock event irq 63 [ 5.017122] installing Xen timer for CPU 3 [ 5.017136] cpu 3 spinlock event irq 70 [ 5.017466] installing Xen timer for CPU 4 [ 5.017479] cpu 4 spinlock event irq 77 [ 5.017805] installing Xen timer for CPU 5 [ 5.017822] cpu 5 spinlock event irq 84 [ 5.018169] installing Xen timer for CPU 6 [ 5.018183] cpu 6 spinlock event irq 91 [ 5.018513] installing Xen timer for CPU 7 [ 5.018528] cpu 7 spinlock event irq 98 [ 5.018849] installing Xen timer for CPU 8 [ 5.018863] cpu 8 spinlock event irq 105 [ 5.019212] installing Xen timer for CPU 9 [ 5.019228] cpu 9 spinlock event irq 112 [ 5.019554] installing Xen timer for CPU 10 [ 5.019569] cpu 10 spinlock event irq 119 [ 5.019850] installing Xen timer for CPU 11 [ 5.019862] cpu 11 spinlock event irq 126 [ 5.020176] installing Xen timer for CPU 12 [ 5.020187] cpu 12 spinlock event irq 133 [ 5.020545] installing Xen timer for CPU 13 [ 5.020558] cpu 13 spinlock event irq 140 [ 5.020856] installing Xen timer for CPU 14 [ 5.020868] cpu 14 spinlock event irq 147 [ 5.021188] installing Xen timer for CPU 15 [ 5.021201] cpu 15 spinlock event irq 154 [ 5.021503] installing Xen timer for CPU 16 [ 5.021514] cpu 16 spinlock event irq 161 [ 5.021814] installing Xen timer for CPU 17 [ 5.021826] cpu 17 spinlock event irq 168 [ 5.022144] installing Xen timer for CPU 18 [ 5.022159] cpu 18 spinlock event irq 175 [ 5.022465] installing Xen timer for CPU 19 [ 5.022478] cpu 19 spinlock event irq 182 [ 5.022673] x86: Booted up 1 node, 20 CPUs [ 5.023279] devtmpfs: initialized [ 5.026327] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 5.026621] pinctrl core: initialized pinctrl subsystem [ 5.026880] NET: Registered protocol family 16 [ 5.026899] xen:grant_table: Grant tables using version 1 layout [ 5.026936] Grant table initialized [ 5.027319] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 5.027321] ACPI: bus type PCI registered [ 5.027323] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 5.027655] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 5.027658] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 [ 5.035920] PCI: Using configuration type 1 for base access [ 5.041907] ACPI: Added _OSI(Module Device) [ 5.041909] ACPI: Added _OSI(Processor Device) [ 5.041911] ACPI: Added _OSI(3.0 _SCP Extensions) [ 5.041912] ACPI: Added _OSI(Processor Aggregator Device) [ 5.044346] xen: registering gsi 9 triggering 0 polarity 0 [ 5.052898] ACPI: Interpreter enabled [ 5.052905] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150410/hwxface-580) [ 5.052909] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150410/hwxface-580) [ 5.052921] ACPI: (supports S0 S3 S4 S5) [ 5.052922] ACPI: Using IOAPIC for interrupt routing [ 5.052945] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 5.058803] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3d]) [ 5.058809] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 5.058875] ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20150410/dsfield-211) [ 5.058879] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff880048cb6fa0), AE_ALREADY_EXISTS (20150410/psparse-536) [ 5.058887] acpi PNP0A08:00: _OSC failed (AE_ALREADY_EXISTS); disabling ASPM [ 5.059093] acpi PNP0A08:00: host bridge window expanded to [io 0x0000-0x03af window]; [io 0x0000-0x03af window] ignored [ 5.059240] PCI host bridge to bus 0000:00 [ 5.059243] pci_bus 0000:00: root bus resource [bus 00-3d] [ 5.059246] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 5.059247] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfdffffff window] [ 5.059250] pci_bus 0000:00: root bus resource [mem 0xfed00000-0xfed003ff window] [ 5.059251] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] [ 5.059253] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 5.059255] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 5.059257] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 5.059259] pci_bus 0000:00: root bus resource [io 0x0d00-0x0fff window] [ 5.059261] pci_bus 0000:00: root bus resource [io 0x1000-0xefff window] [ 5.059282] pci 0000:00:00.0: [8086:3406] type 00 class 0x060000 [ 5.059408] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 5.059528] pci 0000:00:01.0: [8086:3408] type 01 class 0x060400 [ 5.059645] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 5.059692] pci 0000:00:01.0: System wakeup disabled by ACPI [ 5.059762] pci 0000:00:03.0: [8086:340a] type 01 class 0x060400 [ 5.059877] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 5.059921] pci 0000:00:03.0: System wakeup disabled by ACPI [ 5.059993] pci 0000:00:07.0: [8086:340e] type 01 class 0x060400 [ 5.060110] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 5.060155] pci 0000:00:07.0: System wakeup disabled by ACPI [ 5.060227] pci 0000:00:10.0: [8086:3425] type 00 class 0x080000 [ 5.060406] pci 0000:00:10.1: [8086:3426] type 00 class 0x080000 [ 5.060573] pci 0000:00:11.0: [8086:3427] type 00 class 0x080000 [ 5.060741] pci 0000:00:11.1: [8086:3428] type 00 class 0x080000 [ 5.060901] pci 0000:00:14.0: [8086:342e] type 00 class 0x080000 [ 5.061084] pci 0000:00:14.1: [8086:3422] type 00 class 0x080000 [ 5.061261] pci 0000:00:14.2: [8086:3423] type 00 class 0x080000 [ 5.061452] pci 0000:00:15.0: [8086:342f] type 00 class 0x080020 [ 5.061628] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300 [ 5.061714] pci 0000:00:1a.0: reg 0x20: [io 0xb000-0xb01f] [ 5.061812] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 5.061868] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300 [ 5.061952] pci 0000:00:1a.1: reg 0x20: [io 0xb020-0xb03f] [ 5.062050] pci 0000:00:1a.1: System wakeup disabled by ACPI [ 5.062106] pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300 [ 5.062191] pci 0000:00:1a.2: reg 0x20: [io 0xb040-0xb05f] [ 5.062290] pci 0000:00:1a.2: System wakeup disabled by ACPI [ 5.062364] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320 [ 5.062398] pci 0000:00:1a.7: reg 0x10: [mem 0xfa004800-0xfa004bff] [ 5.062558] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 5.062601] pci 0000:00:1a.7: System wakeup disabled by ACPI [ 5.062679] pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300 [ 5.062711] pci 0000:00:1b.0: reg 0x10: [mem 0xfa000000-0xfa003fff 64bit] [ 5.062845] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 5.062951] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400 [ 5.063079] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 5.063124] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 5.063196] pci 0000:00:1c.5: [8086:3a4a] type 01 class 0x060400 [ 5.063325] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 5.063379] pci 0000:00:1c.5: System wakeup disabled by ACPI [ 5.063448] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300 [ 5.063542] pci 0000:00:1d.0: reg 0x20: [io 0xb060-0xb07f] [ 5.063645] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 5.063704] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300 [ 5.063788] pci 0000:00:1d.1: reg 0x20: [io 0xb080-0xb09f] [ 5.063886] pci 0000:00:1d.1: System wakeup disabled by ACPI [ 5.063944] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300 [ 5.064028] pci 0000:00:1d.2: reg 0x20: [io 0xb0a0-0xb0bf] [ 5.064126] pci 0000:00:1d.2: System wakeup disabled by ACPI [ 5.064196] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320 [ 5.064229] pci 0000:00:1d.7: reg 0x10: [mem 0xfa004c00-0xfa004fff] [ 5.064385] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 5.064429] pci 0000:00:1d.7: System wakeup disabled by ACPI [ 5.064497] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 5.064634] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 5.064694] pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100 [ 5.064834] pci 0000:00:1f.0: can't claim BAR 13 [io 0xf800-0xf87f]: no compatible bridge window [ 5.064841] pci 0000:00:1f.0: can't claim BAR 14 [io 0xfa00-0xfa3f]: no compatible bridge window [ 5.064846] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0400 (mask 007f) [ 5.064850] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0480 (mask 000f) [ 5.064854] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0cb0 (mask 000f) [ 5.064987] pci 0000:00:1f.2: [8086:2822] type 00 class 0x010400 [ 5.065019] pci 0000:00:1f.2: reg 0x10: [io 0xb100-0xb107] [ 5.065034] pci 0000:00:1f.2: reg 0x14: [io 0xb110-0xb113] [ 5.065049] pci 0000:00:1f.2: reg 0x18: [io 0xb108-0xb10f] [ 5.065065] pci 0000:00:1f.2: reg 0x1c: [io 0xb114-0xb117] [ 5.065080] pci 0000:00:1f.2: reg 0x20: [io 0xb0c0-0xb0df] [ 5.065095] pci 0000:00:1f.2: reg 0x24: [mem 0xfa004000-0xfa0047ff] [ 5.065172] pci 0000:00:1f.2: PME# supported from D3hot [ 5.065345] pci 0000:00:01.0: PCI bridge to [bus 03] [ 5.065467] pci 0000:0f:00.0: [111d:806e] type 01 class 0x060400 [ 5.065612] pci 0000:0f:00.0: PME# supported from D0 D3hot D3cold [ 5.067593] pci 0000:00:03.0: PCI bridge to [bus 0f-14] [ 5.067600] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff] [ 5.067605] pci 0000:00:03.0: bridge window [mem 0xf9000000-0xf92fffff] [ 5.067704] pci 0000:10:02.0: [111d:806e] type 01 class 0x060400 [ 5.067852] pci 0000:10:02.0: PME# supported from D0 D3hot D3cold [ 5.067954] pci 0000:10:03.0: [111d:806e] type 01 class 0x060400 [ 5.068100] pci 0000:10:03.0: PME# supported from D0 D3hot D3cold [ 5.068200] pci 0000:10:04.0: [111d:806e] type 01 class 0x060400 [ 5.068345] pci 0000:10:04.0: PME# supported from D0 D3hot D3cold [ 5.068449] pci 0000:10:05.0: [111d:806e] type 01 class 0x060400 [ 5.068605] pci 0000:10:05.0: PME# supported from D0 D3hot D3cold [ 5.068785] pci 0000:0f:00.0: PCI bridge to [bus 10-14] [ 5.068797] pci 0000:0f:00.0: bridge window [io 0xc000-0xcfff] [ 5.068803] pci 0000:0f:00.0: bridge window [mem 0xf9000000-0xf92fffff] [ 5.068878] pci 0000:10:02.0: PCI bridge to [bus 11] [ 5.068993] pci 0000:12:00.0: [1b4b:9235] type 00 class 0x010601 [ 5.069019] pci 0000:12:00.0: reg 0x10: [io 0xc020-0xc027] [ 5.069037] pci 0000:12:00.0: reg 0x14: [io 0xc030-0xc033] [ 5.069054] pci 0000:12:00.0: reg 0x18: [io 0xc028-0xc02f] [ 5.069071] pci 0000:12:00.0: reg 0x1c: [io 0xc034-0xc037] [ 5.069089] pci 0000:12:00.0: reg 0x20: [io 0xc000-0xc01f] [ 5.069106] pci 0000:12:00.0: reg 0x24: [mem 0xf9200000-0xf92007ff] [ 5.069124] pci 0000:12:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 5.069202] pci 0000:12:00.0: PME# supported from D3hot [ 5.069327] pci 0000:10:03.0: PCI bridge to [bus 12] [ 5.069338] pci 0000:10:03.0: bridge window [io 0xc000-0xcfff] [ 5.069344] pci 0000:10:03.0: bridge window [mem 0xf9200000-0xf92fffff] [ 5.069454] pci 0000:13:00.0: [8086:f1a8] type 00 class 0x010802 [ 5.069495] pci 0000:13:00.0: reg 0x10: [mem 0xf9000000-0xf9003fff 64bit] [ 5.069605] pci 0000:13:00.0: can't set Max Payload Size to 256; if necessary, use "pci=pcie_bus_safe" and report a bug [ 5.069859] pci 0000:10:04.0: PCI bridge to [bus 13] [ 5.069875] pci 0000:10:04.0: bridge window [mem 0xf9000000-0xf90fffff] [ 5.069982] pci 0000:14:00.0: [8086:f1a8] type 00 class 0x010802 [ 5.070025] pci 0000:14:00.0: reg 0x10: [mem 0xf9100000-0xf9103fff 64bit] [ 5.070127] pci 0000:14:00.0: can't set Max Payload Size to 256; if necessary, use "pci=pcie_bus_safe" and report a bug [ 5.070374] pci 0000:10:05.0: PCI bridge to [bus 14] [ 5.070390] pci 0000:10:05.0: bridge window [mem 0xf9100000-0xf91fffff] [ 5.070561] pci 0000:28:00.0: [111d:806e] type 01 class 0x060400 [ 5.070705] pci 0000:28:00.0: PME# supported from D0 D3hot D3cold [ 5.072626] pci 0000:00:07.0: PCI bridge to [bus 28-2d] [ 5.072633] pci 0000:00:07.0: bridge window [io 0xd000-0xdfff] [ 5.072638] pci 0000:00:07.0: bridge window [mem 0xf8000000-0xf82fffff] [ 5.072738] pci 0000:29:02.0: [111d:806e] type 01 class 0x060400 [ 5.072886] pci 0000:29:02.0: PME# supported from D0 D3hot D3cold [ 5.072987] pci 0000:29:03.0: [111d:806e] type 01 class 0x060400 [ 5.073133] pci 0000:29:03.0: PME# supported from D0 D3hot D3cold [ 5.073232] pci 0000:29:04.0: [111d:806e] type 01 class 0x060400 [ 5.073378] pci 0000:29:04.0: PME# supported from D0 D3hot D3cold [ 5.073481] pci 0000:29:05.0: [111d:806e] type 01 class 0x060400 [ 5.073638] pci 0000:29:05.0: PME# supported from D0 D3hot D3cold [ 5.073820] pci 0000:28:00.0: PCI bridge to [bus 29-2d] [ 5.073832] pci 0000:28:00.0: bridge window [io 0xd000-0xdfff] [ 5.073838] pci 0000:28:00.0: bridge window [mem 0xf8000000-0xf82fffff] [ 5.073915] pci 0000:29:02.0: PCI bridge to [bus 2a] [ 5.074029] pci 0000:2b:00.0: [1b4b:9235] type 00 class 0x010601 [ 5.074055] pci 0000:2b:00.0: reg 0x10: [io 0xd020-0xd027] [ 5.074073] pci 0000:2b:00.0: reg 0x14: [io 0xd030-0xd033] [ 5.074090] pci 0000:2b:00.0: reg 0x18: [io 0xd028-0xd02f] [ 5.074107] pci 0000:2b:00.0: reg 0x1c: [io 0xd034-0xd037] [ 5.074125] pci 0000:2b:00.0: reg 0x20: [io 0xd000-0xd01f] [ 5.074142] pci 0000:2b:00.0: reg 0x24: [mem 0xf8200000-0xf82007ff] [ 5.074160] pci 0000:2b:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 5.074238] pci 0000:2b:00.0: PME# supported from D3hot [ 5.074362] pci 0000:29:03.0: PCI bridge to [bus 2b] [ 5.074373] pci 0000:29:03.0: bridge window [io 0xd000-0xdfff] [ 5.074380] pci 0000:29:03.0: bridge window [mem 0xf8200000-0xf82fffff] [ 5.074489] pci 0000:2c:00.0: [8086:f1a8] type 00 class 0x010802 [ 5.074533] pci 0000:2c:00.0: reg 0x10: [mem 0xf8000000-0xf8003fff 64bit] [ 5.074642] pci 0000:2c:00.0: can't set Max Payload Size to 256; if necessary, use "pci=pcie_bus_safe" and report a bug [ 5.074894] pci 0000:29:04.0: PCI bridge to [bus 2c] [ 5.074910] pci 0000:29:04.0: bridge window [mem 0xf8000000-0xf80fffff] [ 5.075015] pci 0000:2d:00.0: [8086:f1a8] type 00 class 0x010802 [ 5.075056] pci 0000:2d:00.0: reg 0x10: [mem 0xf8100000-0xf8103fff 64bit] [ 5.075157] pci 0000:2d:00.0: can't set Max Payload Size to 256; if necessary, use "pci=pcie_bus_safe" and report a bug [ 5.075403] pci 0000:29:05.0: PCI bridge to [bus 2d] [ 5.075419] pci 0000:29:05.0: bridge window [mem 0xf8100000-0xf81fffff] [ 5.075570] pci 0000:00:1c.0: PCI bridge to [bus 1c] [ 5.075702] pci 0000:01:00.0: [14e4:1684] type 00 class 0x020000 [ 5.075744] pci 0000:01:00.0: reg 0x10: [mem 0xfb000000-0xfb00ffff 64bit] [ 5.075955] pci 0000:01:00.0: PME# supported from D3hot D3cold [ 5.078685] pci 0000:00:1c.5: PCI bridge to [bus 01] [ 5.078703] pci 0000:00:1c.5: bridge window [mem 0xfb000000-0xfb0fffff] [ 5.078822] pci 0000:37:05.0: [11c1:5811] type 00 class 0x0c0010 [ 5.078851] pci 0000:37:05.0: reg 0x10: [mem 0xfd000000-0xfd000fff] [ 5.078988] pci 0000:37:05.0: supports D1 D2 [ 5.078990] pci 0000:37:05.0: PME# supported from D0 D1 D2 D3hot [ 5.079074] pci 0000:37:09.0: [1002:4752] type 00 class 0x030000 [ 5.079104] pci 0000:37:09.0: reg 0x10: [mem 0xfc000000-0xfcffffff] [ 5.079123] pci 0000:37:09.0: reg 0x14: [io 0xe000-0xe0ff] [ 5.079141] pci 0000:37:09.0: reg 0x18: [mem 0xfd001000-0xfd001fff] [ 5.079207] pci 0000:37:09.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 5.079254] pci 0000:37:09.0: supports D1 D2 [ 5.079362] pci 0000:00:1e.0: PCI bridge to [bus 37] (subtractive decode) [ 5.079368] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff] [ 5.079374] pci 0000:00:1e.0: bridge window [mem 0xfc000000-0xfd0fffff] [ 5.079384] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 5.079386] pci 0000:00:1e.0: bridge window [mem 0xf8000000-0xfdffffff window] (subtractive decode) [ 5.079388] pci 0000:00:1e.0: bridge window [mem 0xfed00000-0xfed003ff window] (subtractive decode) [ 5.079390] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode) [ 5.079391] pci 0000:00:1e.0: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 5.079393] pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 5.079395] pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 5.079397] pci 0000:00:1e.0: bridge window [io 0x0d00-0x0fff window] (subtractive decode) [ 5.079398] pci 0000:00:1e.0: bridge window [io 0x1000-0xefff window] (subtractive decode) [ 5.079490] xen: registering gsi 13 triggering 1 polarity 0 [ 5.079911] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 14 15) [ 5.079996] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 14 15) [ 5.080082] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 14 15) [ 5.080167] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 14 15) [ 5.080252] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 14 15) [ 5.080336] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 14 15) [ 5.080421] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 14 15) [ 5.080505] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. [ 5.080616] ACPI: PCI Root Bridge [NHL1] (domain 0000 [bus 3f]) [ 5.080620] acpi PNP0A08:02: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 5.080624] acpi PNP0A08:02: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 5.080689] PCI host bridge to bus 0000:3f [ 5.080692] pci_bus 0000:3f: root bus resource [bus 3f] [ 5.080703] pci 0000:3f:00.0: [8086:2c70] type 00 class 0x060000 [ 5.080803] pci 0000:3f:00.1: [8086:2d81] type 00 class 0x060000 [ 5.080909] pci 0000:3f:02.0: [8086:2d90] type 00 class 0x060000 [ 5.081003] pci 0000:3f:02.1: [8086:2d91] type 00 class 0x060000 [ 5.081097] pci 0000:3f:02.2: [8086:2d92] type 00 class 0x060000 [ 5.081191] pci 0000:3f:02.3: [8086:2d93] type 00 class 0x060000 [ 5.081287] pci 0000:3f:02.4: [8086:2d94] type 00 class 0x060000 [ 5.081382] pci 0000:3f:02.5: [8086:2d95] type 00 class 0x060000 [ 5.081478] pci 0000:3f:03.0: [8086:2d98] type 00 class 0x060000 [ 5.081582] pci 0000:3f:03.1: [8086:2d99] type 00 class 0x060000 [ 5.081692] pci 0000:3f:03.2: [8086:2d9a] type 00 class 0x060000 [ 5.081790] pci 0000:3f:03.4: [8086:2d9c] type 00 class 0x060000 [ 5.081889] pci 0000:3f:04.0: [8086:2da0] type 00 class 0x060000 [ 5.081984] pci 0000:3f:04.1: [8086:2da1] type 00 class 0x060000 [ 5.082079] pci 0000:3f:04.2: [8086:2da2] type 00 class 0x060000 [ 5.082174] pci 0000:3f:04.3: [8086:2da3] type 00 class 0x060000 [ 5.082275] pci 0000:3f:05.0: [8086:2da8] type 00 class 0x060000 [ 5.082368] pci 0000:3f:05.1: [8086:2da9] type 00 class 0x060000 [ 5.082462] pci 0000:3f:05.2: [8086:2daa] type 00 class 0x060000 [ 5.082557] pci 0000:3f:05.3: [8086:2dab] type 00 class 0x060000 [ 5.082677] pci 0000:3f:06.0: [8086:2db0] type 00 class 0x060000 [ 5.082775] pci 0000:3f:06.1: [8086:2db1] type 00 class 0x060000 [ 5.082872] pci 0000:3f:06.2: [8086:2db2] type 00 class 0x060000 [ 5.082966] pci 0000:3f:06.3: [8086:2db3] type 00 class 0x060000 [ 5.083164] ACPI: PCI Root Bridge [NHL2] (domain 0000 [bus 3e]) [ 5.083168] acpi PNP0A08:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 5.083172] acpi PNP0A08:03: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 5.083235] PCI host bridge to bus 0000:3e [ 5.083237] pci_bus 0000:3e: root bus resource [bus 3e] [ 5.083247] pci 0000:3e:00.0: [8086:2c70] type 00 class 0x060000 [ 5.083349] pci 0000:3e:00.1: [8086:2d81] type 00 class 0x060000 [ 5.083455] pci 0000:3e:02.0: [8086:2d90] type 00 class 0x060000 [ 5.083550] pci 0000:3e:02.1: [8086:2d91] type 00 class 0x060000 [ 5.083656] pci 0000:3e:02.2: [8086:2d92] type 00 class 0x060000 [ 5.083763] pci 0000:3e:02.3: [8086:2d93] type 00 class 0x060000 [ 5.083862] pci 0000:3e:02.4: [8086:2d94] type 00 class 0x060000 [ 5.083956] pci 0000:3e:02.5: [8086:2d95] type 00 class 0x060000 [ 5.084052] pci 0000:3e:03.0: [8086:2d98] type 00 class 0x060000 [ 5.084146] pci 0000:3e:03.1: [8086:2d99] type 00 class 0x060000 [ 5.084240] pci 0000:3e:03.2: [8086:2d9a] type 00 class 0x060000 [ 5.084336] pci 0000:3e:03.4: [8086:2d9c] type 00 class 0x060000 [ 5.084435] pci 0000:3e:04.0: [8086:2da0] type 00 class 0x060000 [ 5.084529] pci 0000:3e:04.1: [8086:2da1] type 00 class 0x060000 [ 5.084636] pci 0000:3e:04.2: [8086:2da2] type 00 class 0x060000 [ 5.084744] pci 0000:3e:04.3: [8086:2da3] type 00 class 0x060000 [ 5.084846] pci 0000:3e:05.0: [8086:2da8] type 00 class 0x060000 [ 5.084939] pci 0000:3e:05.1: [8086:2da9] type 00 class 0x060000 [ 5.085033] pci 0000:3e:05.2: [8086:2daa] type 00 class 0x060000 [ 5.085131] pci 0000:3e:05.3: [8086:2dab] type 00 class 0x060000 [ 5.085232] pci 0000:3e:06.0: [8086:2db0] type 00 class 0x060000 [ 5.085327] pci 0000:3e:06.1: [8086:2db1] type 00 class 0x060000 [ 5.085423] pci 0000:3e:06.2: [8086:2db2] type 00 class 0x060000 [ 5.085517] pci 0000:3e:06.3: [8086:2db3] type 00 class 0x060000 [ 5.085976] ACPI: Enabled 1 GPEs in block 00 to 3F [ 5.086214] xen:balloon: Initialising balloon driver [ 5.086249] xen_balloon: Initialising balloon driver [ 5.086358] vgaarb: setting as boot device: PCI:0000:37:09.0 [ 5.086361] vgaarb: device added: PCI:0000:37:09.0,decodes=io+mem,owns=io+mem,locks=none [ 5.086367] vgaarb: loaded [ 5.086368] vgaarb: bridge control possible 0000:37:09.0 [ 5.086460] SCSI subsystem initialized [ 5.086615] libata version 3.00 loaded. [ 5.086674] ACPI: bus type USB registered [ 5.086699] usbcore: registered new interface driver usbfs [ 5.086711] usbcore: registered new interface driver hub [ 5.086836] usbcore: registered new device driver usb [ 5.087115] PCI: Using ACPI for IRQ routing [ 5.089786] PCI: pci_cache_line_size set to 64 bytes [ 5.090135] e820: reserve RAM buffer [mem 0x00095000-0x0009ffff] [ 5.090137] e820: reserve RAM buffer [mem 0x4f86b000-0x4fffffff] [ 5.090257] NetLabel: Initializing [ 5.090259] NetLabel: domain hash size = 128 [ 5.090259] NetLabel: protocols = UNLABELED CIPSOv4 [ 5.090272] NetLabel: unlabeled traffic allowed by default [ 5.090338] amd_nb: Cannot enumerate AMD northbridges [ 5.090412] Switched to clocksource xen [ 5.097949] pnp: PnP ACPI init [ 5.097988] xen: registering gsi 8 triggering 1 polarity 0 [ 5.098014] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 5.098022] xen: registering gsi 12 triggering 1 polarity 0 [ 5.098040] pnp 00:01: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active) [ 5.098047] xen: registering gsi 1 triggering 1 polarity 0 [ 5.098064] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active) [ 5.098188] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (disabled) [ 5.098225] pnp 00:04: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) [ 5.098491] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 5.098553] system 00:06: [io 0x0400-0x041f] has been reserved [ 5.098555] system 00:06: [io 0x0420-0x043f] has been reserved [ 5.098557] system 00:06: [io 0x0440-0x045f] has been reserved [ 5.098559] system 00:06: [io 0x0460-0x047f] has been reserved [ 5.098562] system 00:06: [io 0x0480-0x048f] has been reserved [ 5.098565] system 00:06: [io 0xf800-0xf81f] could not be reserved [ 5.098567] system 00:06: [io 0xf820-0xf83f] has been reserved [ 5.098570] system 00:06: [io 0xf840-0xf85f] has been reserved [ 5.098572] system 00:06: [io 0xf860-0xf87f] has been reserved [ 5.098574] system 00:06: [io 0xfa00-0xfa3f] has been reserved [ 5.098576] system 00:06: [io 0xfc00-0xfc7f] has been reserved [ 5.098578] system 00:06: [io 0xfc80-0xfcff] has been reserved [ 5.098579] system 00:06: [io 0xfe00-0xfe7f] has been reserved [ 5.098581] system 00:06: [io 0xfe80-0xfeff] has been reserved [ 5.098584] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 5.098645] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 5.098648] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 5.099089] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved [ 5.099092] system 00:08: [mem 0x00100000-0xefffffff] could not be reserved [ 5.099094] system 00:08: [mem 0x000e8000-0x000fffff] could not be reserved [ 5.099096] system 00:08: [mem 0xfec01000-0xfecfffff] could not be reserved [ 5.099099] system 00:08: [mem 0xfed00000-0xfed3ffff] could not be reserved [ 5.099101] system 00:08: [mem 0xfed45000-0xffffffff] has been reserved [ 5.099103] system 00:08: [mem 0xf0000000-0xf3ffffff] has been reserved [ 5.099105] system 00:08: [mem 0x000d4000-0x000e7fff] could not be reserved [ 5.099108] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active) [ 5.099116] pnp: PnP ACPI: found 9 devices [ 5.108785] PM-Timer failed consistency check (0xffffff) - aborting. [ 5.108985] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 1c] add_size 1000 [ 5.108988] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 1c] add_size 200000 add_align 100000 [ 5.108991] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 1c] add_size 200000 add_align 100000 [ 5.109005] pci 0000:00:1c.5: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000 [ 5.109008] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000 [ 5.109040] pci 0000:00:1f.0: BAR 13: [io size 0x0080] has bogus alignment [ 5.109042] pci 0000:00:1f.0: BAR 14: [io size 0x0040] has bogus alignment [ 5.109045] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000 [ 5.109047] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000 [ 5.109049] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 5.109051] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 5.109053] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 5.109055] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 5.109057] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000 [ 5.109059] pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000 [ 5.109061] pci 0000:00:1c.5: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000 [ 5.109063] pci 0000:00:1c.5: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000 [ 5.109068] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf8300000-0xf84fffff] [ 5.109072] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf8500000-0xf86fffff 64bit pref] [ 5.109076] pci 0000:00:1c.5: BAR 15: assigned [mem 0xf8700000-0xf88fffff 64bit pref] [ 5.109079] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] [ 5.109082] pci 0000:00:1c.5: BAR 13: assigned [io 0x2000-0x2fff] [ 5.109085] pci 0000:00:01.0: PCI bridge to [bus 03] [ 5.109104] pci 0000:10:02.0: PCI bridge to [bus 11] [ 5.109128] pci 0000:12:00.0: BAR 6: assigned [mem 0xf9210000-0xf921ffff pref] [ 5.109130] pci 0000:10:03.0: PCI bridge to [bus 12] [ 5.109134] pci 0000:10:03.0: bridge window [io 0xc000-0xcfff] [ 5.109143] pci 0000:10:03.0: bridge window [mem 0xf9200000-0xf92fffff] [ 5.109159] pci 0000:10:04.0: PCI bridge to [bus 13] [ 5.109168] pci 0000:10:04.0: bridge window [mem 0xf9000000-0xf90fffff] [ 5.109184] pci 0000:10:05.0: PCI bridge to [bus 14] [ 5.109193] pci 0000:10:05.0: bridge window [mem 0xf9100000-0xf91fffff] [ 5.109209] pci 0000:0f:00.0: PCI bridge to [bus 10-14] [ 5.109213] pci 0000:0f:00.0: bridge window [io 0xc000-0xcfff] [ 5.109222] pci 0000:0f:00.0: bridge window [mem 0xf9000000-0xf92fffff] [ 5.109239] pci 0000:00:03.0: PCI bridge to [bus 0f-14] [ 5.109242] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff] [ 5.109249] pci 0000:00:03.0: bridge window [mem 0xf9000000-0xf92fffff] [ 5.109262] pci 0000:29:02.0: PCI bridge to [bus 2a] [ 5.109286] pci 0000:2b:00.0: BAR 6: assigned [mem 0xf8210000-0xf821ffff pref] [ 5.109287] pci 0000:29:03.0: PCI bridge to [bus 2b] [ 5.109292] pci 0000:29:03.0: bridge window [io 0xd000-0xdfff] [ 5.109301] pci 0000:29:03.0: bridge window [mem 0xf8200000-0xf82fffff] [ 5.109317] pci 0000:29:04.0: PCI bridge to [bus 2c] [ 5.109326] pci 0000:29:04.0: bridge window [mem 0xf8000000-0xf80fffff] [ 5.109342] pci 0000:29:05.0: PCI bridge to [bus 2d] [ 5.109350] pci 0000:29:05.0: bridge window [mem 0xf8100000-0xf81fffff] [ 5.109366] pci 0000:28:00.0: PCI bridge to [bus 29-2d] [ 5.109370] pci 0000:28:00.0: bridge window [io 0xd000-0xdfff] [ 5.109379] pci 0000:28:00.0: bridge window [mem 0xf8000000-0xf82fffff] [ 5.109396] pci 0000:00:07.0: PCI bridge to [bus 28-2d] [ 5.109399] pci 0000:00:07.0: bridge window [io 0xd000-0xdfff] [ 5.109414] pci 0000:00:07.0: bridge window [mem 0xf8000000-0xf82fffff] [ 5.109426] pci 0000:00:1c.0: PCI bridge to [bus 1c] [ 5.109430] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 5.109438] pci 0000:00:1c.0: bridge window [mem 0xf8300000-0xf84fffff] [ 5.109443] pci 0000:00:1c.0: bridge window [mem 0xf8500000-0xf86fffff 64bit pref] [ 5.109453] pci 0000:00:1c.5: PCI bridge to [bus 01] [ 5.109457] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff] [ 5.109464] pci 0000:00:1c.5: bridge window [mem 0xfb000000-0xfb0fffff] [ 5.109470] pci 0000:00:1c.5: bridge window [mem 0xf8700000-0xf88fffff 64bit pref] [ 5.109481] pci 0000:37:09.0: BAR 6: assigned [mem 0xfd020000-0xfd03ffff pref] [ 5.109482] pci 0000:00:1e.0: PCI bridge to [bus 37] [ 5.109486] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff] [ 5.109494] pci 0000:00:1e.0: bridge window [mem 0xfc000000-0xfd0fffff] [ 5.109508] pci_bus 0000:00: resource 4 [mem 0x000a0000-0x000bffff window] [ 5.109510] pci_bus 0000:00: resource 5 [mem 0xf8000000-0xfdffffff window] [ 5.109512] pci_bus 0000:00: resource 6 [mem 0xfed00000-0xfed003ff window] [ 5.109514] pci_bus 0000:00: resource 7 [mem 0xfed40000-0xfed44fff window] [ 5.109515] pci_bus 0000:00: resource 8 [io 0x0000-0x03af window] [ 5.109517] pci_bus 0000:00: resource 9 [io 0x03b0-0x03df window] [ 5.109519] pci_bus 0000:00: resource 10 [io 0x03e0-0x0cf7 window] [ 5.109521] pci_bus 0000:00: resource 11 [io 0x0d00-0x0fff window] [ 5.109522] pci_bus 0000:00: resource 12 [io 0x1000-0xefff window] [ 5.109524] pci_bus 0000:0f: resource 0 [io 0xc000-0xcfff] [ 5.109526] pci_bus 0000:0f: resource 1 [mem 0xf9000000-0xf92fffff] [ 5.109528] pci_bus 0000:10: resource 0 [io 0xc000-0xcfff] [ 5.109530] pci_bus 0000:10: resource 1 [mem 0xf9000000-0xf92fffff] [ 5.109532] pci_bus 0000:12: resource 0 [io 0xc000-0xcfff] [ 5.109534] pci_bus 0000:12: resource 1 [mem 0xf9200000-0xf92fffff] [ 5.109535] pci_bus 0000:13: resource 1 [mem 0xf9000000-0xf90fffff] [ 5.109537] pci_bus 0000:14: resource 1 [mem 0xf9100000-0xf91fffff] [ 5.109539] pci_bus 0000:28: resource 0 [io 0xd000-0xdfff] [ 5.109541] pci_bus 0000:28: resource 1 [mem 0xf8000000-0xf82fffff] [ 5.109543] pci_bus 0000:29: resource 0 [io 0xd000-0xdfff] [ 5.109544] pci_bus 0000:29: resource 1 [mem 0xf8000000-0xf82fffff] [ 5.109546] pci_bus 0000:2b: resource 0 [io 0xd000-0xdfff] [ 5.109548] pci_bus 0000:2b: resource 1 [mem 0xf8200000-0xf82fffff] [ 5.109550] pci_bus 0000:2c: resource 1 [mem 0xf8000000-0xf80fffff] [ 5.109551] pci_bus 0000:2d: resource 1 [mem 0xf8100000-0xf81fffff] [ 5.109553] pci_bus 0000:1c: resource 0 [io 0x1000-0x1fff] [ 5.109555] pci_bus 0000:1c: resource 1 [mem 0xf8300000-0xf84fffff] [ 5.109557] pci_bus 0000:1c: resource 2 [mem 0xf8500000-0xf86fffff 64bit pref] [ 5.109558] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 5.109560] pci_bus 0000:01: resource 1 [mem 0xfb000000-0xfb0fffff] [ 5.109562] pci_bus 0000:01: resource 2 [mem 0xf8700000-0xf88fffff 64bit pref] [ 5.109564] pci_bus 0000:37: resource 0 [io 0xe000-0xefff] [ 5.109565] pci_bus 0000:37: resource 1 [mem 0xfc000000-0xfd0fffff] [ 5.109567] pci_bus 0000:37: resource 4 [mem 0x000a0000-0x000bffff window] [ 5.109569] pci_bus 0000:37: resource 5 [mem 0xf8000000-0xfdffffff window] [ 5.109571] pci_bus 0000:37: resource 6 [mem 0xfed00000-0xfed003ff window] [ 5.109572] pci_bus 0000:37: resource 7 [mem 0xfed40000-0xfed44fff window] [ 5.109574] pci_bus 0000:37: resource 8 [io 0x0000-0x03af window] [ 5.109576] pci_bus 0000:37: resource 9 [io 0x03b0-0x03df window] [ 5.109578] pci_bus 0000:37: resource 10 [io 0x03e0-0x0cf7 window] [ 5.109579] pci_bus 0000:37: resource 11 [io 0x0d00-0x0fff window] [ 5.109581] pci_bus 0000:37: resource 12 [io 0x1000-0xefff window] [ 5.109623] NET: Registered protocol family 2 [ 5.109912] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 5.109983] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 5.110034] TCP: Hash tables configured (established 16384 bind 16384) [ 5.110077] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 5.110090] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 5.110183] NET: Registered protocol family 1 [ 5.110335] xen: registering gsi 20 triggering 0 polarity 1 [ 5.110358] xen: --> pirq=20 -> irq=20 (gsi=20) [ 5.110600] xen: registering gsi 21 triggering 0 polarity 1 [ 5.110609] xen: --> pirq=21 -> irq=21 (gsi=21) [ 5.110830] xen: registering gsi 22 triggering 0 polarity 1 [ 5.110838] xen: --> pirq=22 -> irq=22 (gsi=22) [ 5.111060] xen: registering gsi 22 triggering 0 polarity 1 [ 5.111063] Already setup the GSI :22 [ 5.111294] xen: registering gsi 20 triggering 0 polarity 1 [ 5.111297] Already setup the GSI :20 [ 5.111531] xen: registering gsi 21 triggering 0 polarity 1 [ 5.111534] Already setup the GSI :21 [ 5.111750] xen: registering gsi 22 triggering 0 polarity 1 [ 5.111752] Already setup the GSI :22 [ 5.111970] xen: registering gsi 20 triggering 0 polarity 1 [ 5.111973] Already setup the GSI :20 [ 5.112165] pci 0000:37:09.0: Video device with shadowed ROM [ 5.112271] PCI: CLS 64 bytes, default 64 [ 5.112332] Trying to unpack rootfs image as initramfs... [ 5.665740] Freeing initrd memory: 38152K (ffff880004000000 - ffff880006542000) [ 5.666492] FEATURE SPEC_CTRL Not Present [ 5.666494] FEATURE IBPB Not Present [ 5.666601] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 5.668728] futex hash table entries: 8192 (order: 7, 524288 bytes) [ 5.668805] Initialise system trusted keyring [ 5.668834] audit: initializing netlink subsys (disabled) [ 5.668861] audit: type=2000 audit(1583592186.227:1): initialized [ 5.670647] page_owner is disabled [ 5.670658] zpool: loaded [ 5.670660] zbud: loaded [ 5.671010] VFS: Disk quotas dquot_6.6.0 [ 5.671050] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 5.671082] hugetlbfs: disabling because there are no supported hugepage sizes [ 5.671182] Key type big_key registered [ 5.671185] SELinux: Registering netfilter hooks [ 5.673733] alg: No test for stdrng (krng) [ 5.673753] Key type asymmetric registered [ 5.673756] Asymmetric key parser 'x509' registered [ 5.673778] bounce: pool size: 64 pages [ 5.673788] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 5.673936] io scheduler noop registered [ 5.673939] io scheduler deadline registered (default) [ 5.673974] io scheduler cfq registered [ 5.674594] xen: registering gsi 21 triggering 0 polarity 1 [ 5.674606] Already setup the GSI :21 [ 5.676153] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 5.676169] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 5.676202] intel_idle: MWAIT substates: 0x1120 [ 5.676204] intel_idle: v0.4.1 model 0x2C [ 5.676210] intel_idle: intel_idle yielding to none [ 5.676287] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 5.676291] ACPI: Power Button [PBTN] [ 5.676322] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 5.676324] ACPI: Power Button [PWRF] [ 5.676531] Monitor-Mwait will be used to enter C-1 state [ 5.676557] Monitor-Mwait will be used to enter C-2 state [ 5.676577] Monitor-Mwait will be used to enter C-3 state [ 5.680626] Warning: Processor Platform Limit not supported. [ 5.680822] GHES: HEST is not enabled! [ 5.681024] xen_pciback: backend is vpci [ 5.683518] xen_acpi_processor: Uploading Xen processor PM info [ 5.684935] ACPI: Format specifies more objects [5] than exist in package [1]. [ 5.684936] xen_acpi_processor: Invalid _PSD data [ 5.685037] ACPI: Format specifies more objects [5] than exist in package [1]. [ 5.685038] xen_acpi_processor: Invalid _PSD data [ 5.685135] ACPI: Format specifies more objects [5] than exist in package [1]. [ 5.685136] xen_acpi_processor: Invalid _PSD data [ 5.685233] ACPI: Format specifies more objects [5] than exist in package [1]. [ 5.685234] xen_acpi_processor: Invalid _PSD data [ 5.685875] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 5.686455] hpet_acpi_add: no address or irqs in _CRS [ 5.686519] Non-volatile memory driver v1.3 [ 5.686563] Linux agpgart interface v0.103 [ 5.716458] tpm_tis 00:04: 1.2 TPM (device-id 0xB, rev-id 16) [ 5.867373] AMD IOMMUv2 driver by Joerg Roedel [ 5.867375] AMD IOMMUv2 functionality not available on this system [ 5.871067] brd: module loaded [ 5.872518] loop: module loaded [ 5.872621] libphy: Fixed MDIO Bus: probed [ 5.872627] MST:: : mst_init 896: Mellanox Technologies Software Tools Driver - version 2.0.0 [ 5.872686] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.872691] ehci-pci: EHCI PCI platform driver [ 5.872813] xen: registering gsi 22 triggering 0 polarity 1 [ 5.872817] Already setup the GSI :22 [ 5.872864] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 5.872920] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 5.872938] ehci-pci 0000:00:1a.7: debug port 1 [ 5.876868] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported [ 5.876890] ehci-pci 0000:00:1a.7: irq 22, io mem 0xfa004800 [ 5.882433] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 5.882499] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 5.882501] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.882503] usb usb1: Product: EHCI Host Controller [ 5.882506] usb usb1: Manufacturer: Linux 4.1.12-124.21.1.el6uek.x86_64 ehci_hcd [ 5.882508] usb usb1: SerialNumber: 0000:00:1a.7 [ 5.882627] hub 1-0:1.0: USB hub found [ 5.882636] hub 1-0:1.0: 6 ports detected [ 5.882871] xen: registering gsi 20 triggering 0 polarity 1 [ 5.882875] Already setup the GSI :20 [ 5.882910] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 5.882964] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 5.882982] ehci-pci 0000:00:1d.7: debug port 1 [ 5.886908] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported [ 5.886927] ehci-pci 0000:00:1d.7: irq 20, io mem 0xfa004c00 [ 5.892433] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 5.892489] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 5.892491] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.892493] usb usb2: Product: EHCI Host Controller [ 5.892495] usb usb2: Manufacturer: Linux 4.1.12-124.21.1.el6uek.x86_64 ehci_hcd [ 5.892496] usb usb2: SerialNumber: 0000:00:1d.7 [ 5.892600] hub 2-0:1.0: USB hub found [ 5.892607] hub 2-0:1.0: 6 ports detected [ 5.892737] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 5.892743] ohci-pci: OHCI PCI platform driver [ 5.892759] uhci_hcd: USB Universal Host Controller Interface driver [ 5.892877] xen: registering gsi 20 triggering 0 polarity 1 [ 5.892881] Already setup the GSI :20 [ 5.892898] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 5.892953] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 5.892962] uhci_hcd 0000:00:1a.0: detected 2 ports [ 5.892989] uhci_hcd 0000:00:1a.0: irq 20, io base 0x0000b000 [ 5.893064] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.893066] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.893068] usb usb3: Product: UHCI Host Controller [ 5.893069] usb usb3: Manufacturer: Linux 4.1.12-124.21.1.el6uek.x86_64 uhci_hcd [ 5.893071] usb usb3: SerialNumber: 0000:00:1a.0 [ 5.893172] hub 3-0:1.0: USB hub found [ 5.893180] hub 3-0:1.0: 2 ports detected [ 5.893366] xen: registering gsi 21 triggering 0 polarity 1 [ 5.893370] Already setup the GSI :21 [ 5.893387] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 5.893459] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 5.893468] uhci_hcd 0000:00:1a.1: detected 2 ports [ 5.893508] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b020 [ 5.893581] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.893583] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.893585] usb usb4: Product: UHCI Host Controller [ 5.893587] usb usb4: Manufacturer: Linux 4.1.12-124.21.1.el6uek.x86_64 uhci_hcd [ 5.893589] usb usb4: SerialNumber: 0000:00:1a.1 [ 5.893696] hub 4-0:1.0: USB hub found [ 5.893703] hub 4-0:1.0: 2 ports detected [ 5.893893] xen: registering gsi 22 triggering 0 polarity 1 [ 5.893897] Already setup the GSI :22 [ 5.893914] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 5.893969] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 5.893978] uhci_hcd 0000:00:1a.2: detected 2 ports [ 5.894004] uhci_hcd 0000:00:1a.2: irq 22, io base 0x0000b040 [ 5.894077] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.894079] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.894081] usb usb5: Product: UHCI Host Controller [ 5.894083] usb usb5: Manufacturer: Linux 4.1.12-124.21.1.el6uek.x86_64 uhci_hcd [ 5.894084] usb usb5: SerialNumber: 0000:00:1a.2 [ 5.894187] hub 5-0:1.0: USB hub found [ 5.894194] hub 5-0:1.0: 2 ports detected [ 5.894383] xen: registering gsi 20 triggering 0 polarity 1 [ 5.894388] Already setup the GSI :20 [ 5.894416] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 5.894469] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 5.894478] uhci_hcd 0000:00:1d.0: detected 2 ports [ 5.894504] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000b060 [ 5.894578] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.894580] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.894582] usb usb6: Product: UHCI Host Controller [ 5.894584] usb usb6: Manufacturer: Linux 4.1.12-124.21.1.el6uek.x86_64 uhci_hcd [ 5.894585] usb usb6: SerialNumber: 0000:00:1d.0 [ 5.894685] hub 6-0:1.0: USB hub found [ 5.894692] hub 6-0:1.0: 2 ports detected [ 5.894882] xen: registering gsi 21 triggering 0 polarity 1 [ 5.894886] Already setup the GSI :21 [ 5.894903] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 5.894955] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 5.894964] uhci_hcd 0000:00:1d.1: detected 2 ports [ 5.894990] uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000b080 [ 5.895064] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.895066] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.895068] usb usb7: Product: UHCI Host Controller [ 5.895069] usb usb7: Manufacturer: Linux 4.1.12-124.21.1.el6uek.x86_64 uhci_hcd [ 5.895071] usb usb7: SerialNumber: 0000:00:1d.1 [ 5.895172] hub 7-0:1.0: USB hub found [ 5.895179] hub 7-0:1.0: 2 ports detected [ 5.895371] xen: registering gsi 22 triggering 0 polarity 1 [ 5.895375] Already setup the GSI :22 [ 5.895394] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 5.895457] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 5.895466] uhci_hcd 0000:00:1d.2: detected 2 ports [ 5.895493] uhci_hcd 0000:00:1d.2: irq 22, io base 0x0000b0a0 [ 5.895567] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.895569] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.895570] usb usb8: Product: UHCI Host Controller [ 5.895572] usb usb8: Manufacturer: Linux 4.1.12-124.21.1.el6uek.x86_64 uhci_hcd [ 5.895574] usb usb8: SerialNumber: 0000:00:1d.2 [ 5.895673] hub 8-0:1.0: USB hub found [ 5.895680] hub 8-0:1.0: 2 ports detected [ 5.895813] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 [ 5.898461] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 5.898467] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 5.898558] mousedev: PS/2 mouse device common for all mice [ 5.898847] rtc_cmos 00:00: RTC can wake from S4 [ 5.899054] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 [ 5.899094] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram [ 5.899349] hidraw: raw HID events driver (C) Jiri Kosina [ 5.899547] usbcore: registered new interface driver usbhid [ 5.899549] usbhid: USB HID core driver [ 5.899615] drop_monitor: Initializing network drop monitor service [ 5.899689] gre: GRE over IPv4 demultiplexor driver [ 5.899698] Initializing XFRM netlink socket [ 5.899704] NET: Registered protocol family 17 [ 5.900144] mce: Unable to init device /dev/mcelog (rc: -16) [ 5.900580] Loading compiled-in X.509 certificates [ 5.901438] Loaded X.509 cert 'Oracle America, Inc.: Ksplice Kernel Module Signing Key: 09010ebef5545fa7c54b626ef518e077b5b1ee4c' [ 5.902274] Loaded X.509 cert 'Oracle Linux Kernel Module Signing Key: 2bb352412969a3653f0eb6021763408ebb9bb5ab' [ 5.903113] Loaded X.509 cert 'Oracle CA Server: b59275a22dae18b9ab5f7ac4c816fab6c5f0bf9b' [ 5.903128] registered taskstats version 1 [ 6.184431] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 6.281503] rtc_cmos 00:00: setting system clock to 2020-03-07 14:43:06 UTC (1583592186) [ 6.282426] Freeing unused kernel memory: 1988K (ffffffff81c6d000 - ffffffff81e5e000) [ 6.302590] usb 1-1: New USB device found, idVendor=0781, idProduct=5583 [ 6.302593] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 6.302595] usb 1-1: Product: Ultra Fit [ 6.302597] usb 1-1: Manufacturer: SanDisk [ 6.302598] usb 1-1: SerialNumber: 4C530000180630114050 [ 6.308295] dracut: dracut-004-409.0.7.el6_8.2 [ 6.320440] dracut: rd_NO_LUKS: removing cryptoluks activation [ 6.322167] dracut: rd_NO_LVM: removing LVM activation [ 6.349957] device-mapper: uevent: version 1.0.3 [ 6.350048] device-mapper: ioctl: 4.31.0-ioctl (2015-3-12) initialised: dm-devel@redhat.com [ 6.367096] udev: starting version 147 [ 6.466305] wmi: Mapper loaded [ 6.484772] random: nonblocking pool is initialized [ 6.665431] clocksource tsc: mask: 0xffffffffffffffff max_cycles: 0x2c18405b7f4, max_idle_ns: 440795289991 ns [ 7.665593] Switched to clocksource tsc [ 9.526515] floppy0: no floppy controllers found [ 9.619564] dracut: Starting plymouth daemon [ 9.645256] dracut: rd_NO_DM: removing DM RAID activation [ 9.649274] dracut: rd_NO_MD: removing MD RAID activation [ 9.689603] Loading iSCSI transport class v2.0-870. [ 9.700236] iscsi: registered transport (qla4xxx) [ 9.700274] QLogic iSCSI HBA Driver [ 9.722784] IPv6: Loaded, but administratively disabled, reboot required to enable [ 9.725642] libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits. [ 9.725644] libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0. [ 9.727750] Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010) [ 9.727782] iscsi: registered transport (cxgb3i) [ 9.738222] Chelsio T4/T5 iSCSI Driver cxgb4i v0.9.4 [ 9.738250] iscsi: registered transport (cxgb4i) [ 9.742853] cnic: QLogic cnicDriver v2.5.22 (July 20, 2015) [ 9.745507] QLogic NetXtreme II iSCSI Driver bnx2i v2.7.10.1 (Jul 16, 2014) [ 9.745526] iscsi: registered transport (bnx2i) [ 9.749790] ahci 0000:00:1f.2: version 3.0 [ 9.749933] xen: registering gsi 18 triggering 0 polarity 1 [ 9.749960] xen: --> pirq=18 -> irq=18 (gsi=18) [ 9.749996] ahci 0000:00:1f.2: controller can't do SNTF, turning off CAP_SNTF [ 9.750133] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl RAID mode [ 9.750138] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pmp pio slum part ccc sxs [ 9.750892] scsi host0: ahci [ 9.751108] scsi host1: ahci [ 9.751133] iscsi: registered transport (be2iscsi) [ 9.751135] In beiscsi_module_init, tt=ffffffffa0280100 [ 9.751269] scsi host2: ahci [ 9.751425] scsi host3: ahci [ 9.751541] scsi host4: ahci [ 9.751665] scsi host5: ahci [ 9.751707] ata1: SATA max UDMA/133 abar m2048@0xfa004000 port 0xfa004100 irq 202 [ 9.751709] ata2: SATA max UDMA/133 abar m2048@0xfa004000 port 0xfa004180 irq 202 [ 9.751711] ata3: SATA max UDMA/133 abar m2048@0xfa004000 port 0xfa004200 irq 202 [ 9.751713] ata4: SATA max UDMA/133 abar m2048@0xfa004000 port 0xfa004280 irq 202 [ 9.751715] ata5: SATA max UDMA/133 abar m2048@0xfa004000 port 0xfa004300 irq 202 [ 9.751717] ata6: SATA max UDMA/133 abar m2048@0xfa004000 port 0xfa004380 irq 202 [ 9.751785] xen: registering gsi 36 triggering 0 polarity 1 [ 9.751799] xen: --> pirq=36 -> irq=36 (gsi=36) [ 9.762500] ahci 0000:12:00.0: AHCI 0001.0000 32 slots 4 ports 6 Gbps 0xf impl SATA mode [ 9.762504] ahci 0000:12:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs [ 9.763060] scsi host6: ahci [ 9.763243] scsi host7: ahci [ 9.763471] scsi host8: ahci [ 9.763642] scsi host9: ahci [ 9.763718] ata7: SATA max UDMA/133 abar m2048@0xf9200000 port 0xf9200100 irq 203 [ 9.763721] ata8: SATA max UDMA/133 abar m2048@0xf9200000 port 0xf9200180 irq 203 [ 9.763723] ata9: SATA max UDMA/133 abar m2048@0xf9200000 port 0xf9200200 irq 203 [ 9.763725] ata10: SATA max UDMA/133 abar m2048@0xf9200000 port 0xf9200280 irq 203 [ 9.763793] xen: registering gsi 38 triggering 0 polarity 1 [ 9.763806] xen: --> pirq=38 -> irq=38 (gsi=38) [ 9.774507] ahci 0000:2b:00.0: AHCI 0001.0000 32 slots 4 ports 6 Gbps 0xf impl SATA mode [ 9.774516] ahci 0000:2b:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs [ 9.775051] scsi host10: ahci [ 9.775241] scsi host11: ahci [ 9.775423] scsi host12: ahci [ 9.775616] scsi host13: ahci [ 9.775660] ata11: SATA max UDMA/133 abar m2048@0xf8200000 port 0xf8200100 irq 204 [ 9.775663] ata12: SATA max UDMA/133 abar m2048@0xf8200000 port 0xf8200180 irq 204 [ 9.775665] ata13: SATA max UDMA/133 abar m2048@0xf8200000 port 0xf8200200 irq 204 [ 9.775667] ata14: SATA max UDMA/133 abar m2048@0xf8200000 port 0xf8200280 irq 204 [ 10.056520] ata4: SATA link down (SStatus 0 SControl 300) [ 10.056560] ata5: SATA link down (SStatus 0 SControl 300) [ 10.056579] ata3: SATA link down (SStatus 0 SControl 300) [ 10.056597] ata6: SATA link down (SStatus 0 SControl 300) [ 10.056614] ata2: SATA link down (SStatus 0 SControl 300) [ 10.068514] ata10: SATA link down (SStatus 0 SControl 300) [ 10.068544] ata9: SATA link down (SStatus 0 SControl 300) [ 10.068568] ata7: SATA link down (SStatus 0 SControl 300) [ 10.068591] ata8: SATA link down (SStatus 0 SControl 300) [ 10.080512] ata14: SATA link down (SStatus 0 SControl 300) [ 10.080543] ata12: SATA link down (SStatus 0 SControl 300) [ 10.080566] ata13: SATA link down (SStatus 0 SControl 300) [ 10.080588] ata11: SATA link down (SStatus 0 SControl 300) [ 10.211525] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 10.214364] ata1.00: ATAPI: HL-DT-ST BD-RE WH16NS40, 1.00, max UDMA/100 [ 10.215163] ata1.00: configured for UDMA/100 [ 10.219788] scsi 0:0:0:0: CD-ROM HL-DT-ST BD-RE WH16NS40 1.00 PQ: 0 ANSI: 5 [ 10.244598] nvme nvme0: pci function 0000:13:00.0 [ 10.244664] nvme nvme1: pci function 0000:14:00.0 [ 10.244680] xen: registering gsi 24 triggering 0 polarity 1 [ 10.244702] xen: --> pirq=24 -> irq=24 (gsi=24) [ 10.244728] xen: registering gsi 34 triggering 0 polarity 1 [ 10.244732] nvme nvme2: pci function 0000:2c:00.0 [ 10.244741] xen: --> pirq=34 -> irq=34 (gsi=34) [ 10.244809] xen: registering gsi 30 triggering 0 polarity 1 [ 10.244928] xen: --> pirq=30 -> irq=30 (gsi=30) [ 10.244936] nvme nvme3: pci function 0000:2d:00.0 [ 10.245050] xen: registering gsi 37 triggering 0 polarity 1 [ 10.245156] xen: --> pirq=37 -> irq=37 (gsi=37) [ 10.277770] pps_core: LinuxPPS API ver. 1 registered [ 10.277772] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 10.279315] PTP clock support registered [ 10.282959] tg3.c:v3.137 (May 11, 2014) [ 10.283018] xen: registering gsi 17 triggering 0 polarity 1 [ 10.283035] xen: --> pirq=17 -> irq=17 (gsi=17) [ 10.307112] tg3 0000:01:00.0 eth0: Tigon3 [partno(BCM95754) rev 5784100] (PCI Express) MAC address 24:be:05:03:fa:14 [ 10.307115] tg3 0000:01:00.0 eth0: attached PHY is 5784 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) [ 10.307118] tg3 0000:01:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 10.307120] tg3 0000:01:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 10.335516] usb-storage 1-1:1.0: USB Mass Storage device detected [ 10.335735] scsi host14: usb-storage 1-1:1.0 [ 10.335800] usbcore: registered new interface driver usb-storage [ 10.349361] nvme1n1: p1 [ 10.349636] nvme2n1: p1 [ 10.350086] nvme3n1: p1 [ 10.350121] nvme0n1: p1 [ 10.502361] xen: registering gsi 19 triggering 0 polarity 1 [ 10.502387] xen: --> pirq=19 -> irq=19 (gsi=19) [ 10.553566] firewire_ohci 0000:37:05.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0 [ 10.585165] sr 0:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 10.585170] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 10.585316] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 11.053625] firewire_core 0000:37:05.0: created device fw0: GUID 0060b000008e2676, S400 [ 11.337005] scsi 14:0:0:0: Direct-Access SanDisk Ultra Fit 1.00 PQ: 0 ANSI: 6 [ 13.646644] floppy0: no floppy controllers found [ 13.676613] sd 14:0:0:0: [sda] 60063744 512-byte logical blocks: (30.7 GB/28.6 GiB) [ 13.687730] sd 14:0:0:0: [sda] Write Protect is off [ 13.687735] sd 14:0:0:0: [sda] Mode Sense: 43 00 00 00 [ 13.690856] sd 14:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 13.708971] sda: sda1 sda2 sda3 [ 13.712365] sd 14:0:0:0: [sda] Attached SCSI removable disk [ 14.182357] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 14.204302] dracut: Mounted root filesystem /dev/sda2 [ 14.462726] SELinux: Disabled at runtime. [ 14.462747] SELinux: Unregistering netfilter hooks [ 14.489632] audit: type=1404 audit(1583592194.707:2): selinux=0 auid=4294967295 ses=4294967295 [ 14.496008] dracut: [ 14.681514] dracut: Switching root [ 15.396793] udev: starting version 147 [ 16.817752] EDAC MC: Ver: 3.0.0 [ 16.822611] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:3f:03.0 (POLLED) [ 16.822646] EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:3f:03.0 (POLLED) [ 16.822930] EDAC MC1: Giving out device to module i7core_edac.c controller i7 core #1: DEV 0000:3e:03.0 (POLLED) [ 16.822947] EDAC PCI1: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:3e:03.0 (POLLED) [ 16.823076] EDAC i7core: Driver loaded, 2 memory controller(s) found. [ 16.985573] xen: registering gsi 21 triggering 0 polarity 1 [ 16.985586] Already setup the GSI :21 [ 17.018259] snd_hda_codec_realtek hdaudioC0D0: ALC262: SKU not ready 0x411111f0 [ 17.018671] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC262: line_outs=1 (0x15/0x0/0x0/0x0/0x0) type:line [ 17.018674] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=1 (0x16/0x0/0x0/0x0/0x0) [ 17.018676] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 17.018678] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 17.018679] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 17.018682] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 17.018684] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 17.018686] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 17.029132] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5 [ 17.029499] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 17.029580] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 17.029632] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 17.029649] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 17.029709] sd 14:0:0:0: Attached scsi generic sg1 type 0 [ 17.029727] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 17.029837] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 17.186133] input: PC Speaker as /devices/platform/pcspkr/input/input11 [ 17.286531] input: HP WMI hotkeys as /devices/virtual/input/input12 [ 17.351796] iTCO_vendor_support: vendor-support=0 [ 17.358002] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 17.358024] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS [ 17.498741] parport_pc parport_pc.956: Unable to set coherent dma mask: disabling DMA [ 17.498801] parport_pc parport_pc.888: Unable to set coherent dma mask: disabling DMA [ 17.498865] parport_pc parport_pc.632: Unable to set coherent dma mask: disabling DMA [ 20.543782] floppy0: no floppy controllers found [ 20.582920] ppdev: user-space parallel port driver [ 20.663487] device-mapper: multipath: version 1.9.0 loaded [ 21.041846] EXT4-fs (sda2): re-mounted. Opts: (null) [ 21.209410] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 21.446547] Adding 5903356k swap on /dev/sda3. Priority:-1 extents:1 across:5903356k FS [ 25.415566] tg3 0000:01:00.0 eth0: Link is up at 1000 Mbps, full duplex [ 25.415570] tg3 0000:01:00.0 eth0: Flow control is on for TX and on for RX [ 31.179098] audit: type=1305 audit(1583613811.396:3): audit_pid=2047 old=0 auid=4294967295 ses=4294967295 res=1 [ 32.636860] RPC: Registered named UNIX socket transport module. [ 32.636863] RPC: Registered udp transport module. [ 32.636864] RPC: Registered tcp transport module. [ 32.636865] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 32.887283] bnx2fc: QLogic FCoE Driver bnx2fc v2.10.3 (October 15, 2015) [ 34.262792] xen:xen_evtchn: Event-channel device installed [ 86.031597] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 975.656333] nvme nvme0: I/O 1 QID 4 timeout, aborting [ 975.656347] nvme nvme0: I/O 2 QID 4 timeout, aborting [ 975.656353] nvme nvme0: I/O 3 QID 4 timeout, aborting [ 975.656358] nvme nvme0: I/O 4 QID 4 timeout, aborting [ 1005.657048] nvme nvme0: I/O 1 QID 4 timeout, reset controller [ 1035.657751] nvme nvme0: I/O 1 QID 0 timeout, reset controller [root@vhost0 ~]# lspvi -bash: lspvi: command not found [root@vhost0 ~]# lspci 00:00.0 Host bridge: Intel Corporation 5520 I/O Hub to ESI Port (rev 13) 00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13) 00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13) 00:07.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 (rev 13) 00:10.0 PIC: Intel Corporation 7500/5520/5500/X58 Physical and Link Layer Registers Port 0 (rev 13) 00:10.1 PIC: Intel Corporation 7500/5520/5500/X58 Routing and Protocol Layer Registers Port 0 (rev 13) 00:11.0 PIC: Intel Corporation 7500/5520/5500 Physical and Link Layer Registers Port 1 (rev 13) 00:11.1 PIC: Intel Corporation 7500/5520/5500 Routing & Protocol Layer Register Port 1 (rev 13) 00:14.0 PIC: Intel Corporation 7500/5520/5500/X58 I/O Hub System Management Registers (rev 13) 00:14.1 PIC: Intel Corporation 7500/5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 13) 00:14.2 PIC: Intel Corporation 7500/5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 13) 00:15.0 PIC: Intel Corporation 7500/5520/5500/X58 Trusted Execution Technology Registers (rev 13) 00:1a.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 00:1a.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 00:1a.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 00:1a.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 00:1c.5 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 6 00:1d.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 00:1d.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 00:1d.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 00:1d.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller 00:1f.2 RAID bus controller: Intel Corporation SATA Controller [RAID mode] 01:00.0 Ethernet controller: Broadcom Limited NetXtreme BCM5764M Gigabit Ethernet PCIe (rev 10) 0f:00.0 PCI bridge: Integrated Device Technology, Inc. [IDT] PES24T6G2 PCI Express Gen2 Switch (rev 02) 10:02.0 PCI bridge: Integrated Device Technology, Inc. [IDT] PES24T6G2 PCI Express Gen2 Switch (rev 02) 10:03.0 PCI bridge: Integrated Device Technology, Inc. [IDT] PES24T6G2 PCI Express Gen2 Switch (rev 02) 10:04.0 PCI bridge: Integrated Device Technology, Inc. [IDT] PES24T6G2 PCI Express Gen2 Switch (rev 02) 10:05.0 PCI bridge: Integrated Device Technology, Inc. [IDT] PES24T6G2 PCI Express Gen2 Switch (rev 02) 12:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9235 PCIe 2.0 x2 4-port SATA 6 Gb/s Controller (rev 11) 13:00.0 Non-Volatile memory controller: Intel Corporation Device f1a8 (rev 03) 14:00.0 Non-Volatile memory controller: Intel Corporation Device f1a8 (rev 03) 28:00.0 PCI bridge: Integrated Device Technology, Inc. [IDT] PES24T6G2 PCI Express Gen2 Switch (rev 02) 29:02.0 PCI bridge: Integrated Device Technology, Inc. [IDT] PES24T6G2 PCI Express Gen2 Switch (rev 02) 29:03.0 PCI bridge: Integrated Device Technology, Inc. [IDT] PES24T6G2 PCI Express Gen2 Switch (rev 02) 29:04.0 PCI bridge: Integrated Device Technology, Inc. [IDT] PES24T6G2 PCI Express Gen2 Switch (rev 02) 29:05.0 PCI bridge: Integrated Device Technology, Inc. [IDT] PES24T6G2 PCI Express Gen2 Switch (rev 02) 2b:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9235 PCIe 2.0 x2 4-port SATA 6 Gb/s Controller (rev 11) 2c:00.0 Non-Volatile memory controller: Intel Corporation Device f1a8 (rev 03) 2d:00.0 Non-Volatile memory controller: Intel Corporation Device f1a8 (rev 03) 37:05.0 FireWire (IEEE 1394): LSI Corporation FW322/323 [TrueFire] 1394a Controller (rev 70) 37:09.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Rage XL PCI (rev 27) 3e:00.0 Host bridge: Intel Corporation Xeon 5600 Series QuickPath Architecture Generic Non-core Registers (rev 02) 3e:00.1 Host bridge: Intel Corporation Xeon 5600 Series QuickPath Architecture System Address Decoder (rev 02) 3e:02.0 Host bridge: Intel Corporation Xeon 5600 Series QPI Link 0 (rev 02) 3e:02.1 Host bridge: Intel Corporation Xeon 5600 Series QPI Physical 0 (rev 02) 3e:02.2 Host bridge: Intel Corporation Xeon 5600 Series Mirror Port Link 0 (rev 02) 3e:02.3 Host bridge: Intel Corporation Xeon 5600 Series Mirror Port Link 1 (rev 02) 3e:02.4 Host bridge: Intel Corporation Xeon 5600 Series QPI Link 1 (rev 02) 3e:02.5 Host bridge: Intel Corporation Xeon 5600 Series QPI Physical 1 (rev 02) 3e:03.0 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Registers (rev 02) 3e:03.1 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Target Address Decoder (rev 02) 3e:03.2 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller RAS Registers (rev 02) 3e:03.4 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Test Registers (rev 02) 3e:04.0 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Control (rev 02) 3e:04.1 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Address (rev 02) 3e:04.2 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Rank (rev 02) 3e:04.3 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Thermal Control (rev 02) 3e:05.0 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Control (rev 02) 3e:05.1 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Address (rev 02) 3e:05.2 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Rank (rev 02) 3e:05.3 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Thermal Control (rev 02) 3e:06.0 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Control (rev 02) 3e:06.1 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Address (rev 02) 3e:06.2 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Rank (rev 02) 3e:06.3 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Thermal Control (rev 02) 3f:00.0 Host bridge: Intel Corporation Xeon 5600 Series QuickPath Architecture Generic Non-core Registers (rev 02) 3f:00.1 Host bridge: Intel Corporation Xeon 5600 Series QuickPath Architecture System Address Decoder (rev 02) 3f:02.0 Host bridge: Intel Corporation Xeon 5600 Series QPI Link 0 (rev 02) 3f:02.1 Host bridge: Intel Corporation Xeon 5600 Series QPI Physical 0 (rev 02) 3f:02.2 Host bridge: Intel Corporation Xeon 5600 Series Mirror Port Link 0 (rev 02) 3f:02.3 Host bridge: Intel Corporation Xeon 5600 Series Mirror Port Link 1 (rev 02) 3f:02.4 Host bridge: Intel Corporation Xeon 5600 Series QPI Link 1 (rev 02) 3f:02.5 Host bridge: Intel Corporation Xeon 5600 Series QPI Physical 1 (rev 02) 3f:03.0 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Registers (rev 02) 3f:03.1 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Target Address Decoder (rev 02) 3f:03.2 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller RAS Registers (rev 02) 3f:03.4 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Test Registers (rev 02) 3f:04.0 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Control (rev 02) 3f:04.1 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Address (rev 02) 3f:04.2 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Rank (rev 02) 3f:04.3 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Thermal Control (rev 02) 3f:05.0 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Control (rev 02) 3f:05.1 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Address (rev 02) 3f:05.2 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Rank (rev 02) 3f:05.3 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Thermal Control (rev 02) 3f:06.0 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Control (rev 02) 3f:06.1 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Address (rev 02) 3f:06.2 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Rank (rev 02) 3f:06.3 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Thermal Control (rev 02) [root@vhost0 ~]# lspci /dev/nvme1 Usage: lspci [] Basic display modes: -mm Produce machine-readable output (single -m for an obsolete format) -t Show bus tree Display options: -v Be verbose (-vv for very verbose) -k Show kernel drivers handling each device -x Show hex-dump of the standard part of the config space -xxx Show hex-dump of the whole config space (dangerous; root only) -xxxx Show hex-dump of the 4096-byte extended config space (root only) -b Bus-centric view (addresses and IRQ's as seen by the bus) -D Always show domain numbers Resolving of device ID's to names: -n Show numeric ID's -nn Show both textual and numeric ID's (names & numbers) -q Query the PCI ID database for unknown ID's via DNS -qq As above, but re-query locally cached entries -Q Query the PCI ID database for all ID's via DNS Selection of devices: -s [[[[]:]]:][][.[]] Show only devices in selected slots -d []:[] Show only devices with specified ID's Other options: -i Use specified ID database instead of /usr/share/hwdata/pci.ids -p Look up kernel modules in a given file instead of default modules.pcimap -M Enable `bus mapping' mode (dangerous; root only) PCI access options: -A Use the specified PCI access method (see `-A help' for a list) -O = Set PCI access parameter (see `-O help' for a list) -G Enable PCI access debugging -H Use direct hardware access ( = 1 or 2) -F Read PCI configuration dump from a given file [root@vhost0 ~]# lspci -v | more 00:00.0 Host bridge: Intel Corporation 5520 I/O Hub to ESI Port (rev 13) Subsystem: Hewlett-Packard Company Device 130a Flags: fast devsel Capabilities: [60] MSI: Enable- Count=1/2 Maskable+ 64bit- Capabilities: [90] Express Root Port (Slot-), MSI 00 Capabilities: [e0] Power Management version 3 Capabilities: [100] Advanced Error Reporting Capabilities: [150] Access Control Services Capabilities: [160] Vendor Specific Information: ID=0002 Rev=0 Len=00c < ?> 00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Capabilities: [40] Subsystem: Hewlett-Packard Company Device 130a Capabilities: [60] MSI: Enable- Count=1/2 Maskable+ 64bit- Capabilities: [90] Express Root Port (Slot+), MSI 00 Capabilities: [e0] Power Management version 3 Capabilities: [100] Advanced Error Reporting Capabilities: [150] Access Control Services Capabilities: [160] Vendor Specific Information: ID=0002 Rev=0 Len=00c < ?> Kernel driver in use: pcieport 00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=0f, subordinate=14, sec-latency=0 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: f9000000-f92fffff Capabilities: [40] Subsystem: Hewlett-Packard Company Device 130a Capabilities: [60] MSI: Enable- Count=1/2 Maskable+ 64bit- Capabilities: [90] Express Root Port (Slot+), MSI 00 Capabilities: [e0] Power Management version 3 Capabilities: [100] Advanced Error Reporting Capabilities: [150] Access Control Services Capabilities: [160] Vendor Specific Information: ID=0002 Rev=0 Len=00c < ?> Kernel driver in use: pcieport 00:07.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 (rev 13) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=28, subordinate=2d, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: f8000000-f82fffff Capabilities: [40] Subsystem: Hewlett-Packard Company Device 130a Capabilities: [60] MSI: Enable- Count=1/2 Maskable+ 64bit- Capabilities: [90] Express Root Port (Slot+), MSI 00 Capabilities: [e0] Power Management version 3 Capabilities: [100] Advanced Error Reporting Capabilities: [150] Access Control Services Capabilities: [160] Vendor Specific Information: ID=0002 Rev=0 Len=00c < ?> Kernel driver in use: pcieport 00:10.0 PIC: Intel Corporation 7500/5520/5500/X58 Physical and Link Layer Registers Port 0 (rev 13) (prog-if 00 [8259]) Flags: fast devsel Capabilities: [50] Vendor Specific Information: Len=ff < ?> 00:10.1 PIC: Intel Corporation 7500/5520/5500/X58 Routing and Protocol Layer Registers Port 0 (rev 13) (prog-if 00 [8259]) Flags: fast devsel 00:11.0 PIC: Intel Corporation 7500/5520/5500 Physical and Link Layer Registers Port 1 (rev 13) (prog-if 00 [8259]) Flags: fast devsel Capabilities: [50] Vendor Specific Information: Len=ff < ?> 00:11.1 PIC: Intel Corporation 7500/5520/5500 Routing & Protocol Layer Register Port 1 (rev 13) (prog-if 00 [8259]) Flags: fast devsel 00:14.0 PIC: Intel Corporation 7500/5520/5500/X58 I/O Hub System Management Registers (rev 13) (prog-if 00 [8259]) Flags: fast devsel Capabilities: [40] Express Root Complex Integrated Endpoint, MSI 00 Kernel driver in use: i7core_edac 00:14.1 PIC: Intel Corporation 7500/5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 13) (prog-if 00 [8259]) Flags: fast devsel Capabilities: [40] Express Root Complex Integrated Endpoint, MSI 00 00:14.2 PIC: Intel Corporation 7500/5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 13) (prog-if 00 [8259]) Flags: fast devsel Capabilities: [40] Express Root Complex Integrated Endpoint, MSI 00 00:15.0 PIC: Intel Corporation 7500/5520/5500/X58 Trusted Execution Technology Registers (rev 13) (prog-if 20 [IO(X)-APIC]) Flags: fast devsel 00:1a.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Device 130a Flags: bus master, medium devsel, latency 0, IRQ 20 I/O ports at b000 [size=32] Capabilities: [50] PCI Advanced Features Kernel driver in use: uhci_hcd 00:1a.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Device 130a Flags: bus master, medium devsel, latency 0, IRQ 21 I/O ports at b020 [size=32] Capabilities: [50] PCI Advanced Features Kernel driver in use: uhci_hcd 00:1a.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Device 130a Flags: bus master, medium devsel, latency 0, IRQ 22 I/O ports at b040 [size=32] Capabilities: [50] PCI Advanced Features Kernel driver in use: uhci_hcd 00:1a.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company Device 130a Flags: bus master, medium devsel, latency 0, IRQ 22 Memory at fa004800 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] Debug port: BAR=1 offset=00a0 Capabilities: [98] PCI Advanced Features Kernel driver in use: ehci-pci 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller Subsystem: Hewlett-Packard Company Device 130a Flags: bus master, fast devsel, latency 0, IRQ 237 Memory at fa000000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [100] Virtual Channel Capabilities: [130] Root Complex Link Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=1c, subordinate=1c, sec-latency=0 I/O behind bridge: 00001000-00001fff Memory behind bridge: f8300000-f84fffff Prefetchable memory behind bridge: 00000000f8500000-00000000f86fffff Capabilities: [40] Express Root Port (Slot+), MSI 00 Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [90] Subsystem: Hewlett-Packard Company Device 130a Capabilities: [a0] Power Management version 2 Capabilities: [100] Virtual Channel Capabilities: [180] Root Complex Link Kernel driver in use: pcieport 00:1c.5 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 6 (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: fb000000-fb0fffff Prefetchable memory behind bridge: 00000000f8700000-00000000f88fffff Capabilities: [40] Express Root Port (Slot+), MSI 00 Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [90] Subsystem: Hewlett-Packard Company Device 130a Capabilities: [a0] Power Management version 2 Capabilities: [100] Virtual Channel Capabilities: [180] Root Complex Link Kernel driver in use: pcieport 00:1d.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Device 130a Flags: bus master, medium devsel, latency 0, IRQ 20 I/O ports at b060 [size=32] Capabilities: [50] PCI Advanced Features Kernel driver in use: uhci_hcd 00:1d.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Device 130a Flags: bus master, medium devsel, latency 0, IRQ 21 I/O ports at b080 [size=32] Capabilities: [50] PCI Advanced Features Kernel driver in use: uhci_hcd 00:1d.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Device 130a Flags: bus master, medium devsel, latency 0, IRQ 22 I/O ports at b0a0 [size=32] Capabilities: [50] PCI Advanced Features Kernel driver in use: uhci_hcd 00:1d.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company Device 130a Flags: bus master, medium devsel, latency 0, IRQ 20 Memory at fa004c00 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] Debug port: BAR=1 offset=00a0 Capabilities: [98] PCI Advanced Features Kernel driver in use: ehci-pci 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) (prog-if 01 [Subtractive decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=37, subordinate=37, sec-latency=32 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fc000000-fd0fffff Capabilities: [50] Subsystem: Hewlett-Packard Company Device 130a 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller Subsystem: Hewlett-Packard Company Device 130a Flags: bus master, medium devsel, latency 0 Capabilities: [e0] Vendor Specific Information: Len=0c < ?> Kernel driver in use: lpc_ich 00:1f.2 RAID bus controller: Intel Corporation SATA Controller [RAID mode] Subsystem: Hewlett-Packard Company Device 130a Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 202 I/O ports at b100 [size=8] I/O ports at b110 [size=4] I/O ports at b108 [size=8] I/O ports at b114 [size=4] I/O ports at b0c0 [size=32] Memory at fa004000 (32-bit, non-prefetchable) [size=2K] Capabilities: [80] MSI: Enable+ Count=1/16 Maskable- 64bit- Capabilities: [70] Power Management version 3 Capabilities: [a8] SATA HBA v1.0 Capabilities: [b0] PCI Advanced Features Kernel driver in use: ahci 01:00.0 Ethernet controller: Broadcom Limited NetXtreme BCM5764M Gigabit Ethernet PCIe (rev 10) Subsystem: Hewlett-Packard Company Device 130a Flags: bus master, fast devsel, latency 0, IRQ 238 Memory at fb000000 (64-bit, non-prefetchable) [size=64K] Capabilities: [48] Power Management version 3 Capabilities: [40] Vital Product Data Capabilities: [60] Vendor Specific Information: Len=6c < ?> Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [cc] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [13c] Virtual Channel Capabilities: [160] Device Serial Number 24-be-05-ff-fe-03-fa-14 Capabilities: [16c] Power Budgeting < ?> Kernel driver in use: tg3 0f:00.0 PCI bridge: Integrated Device Technology, Inc. [IDT] PES24T6G2 PCI Express Gen2 Switch (rev 02) (prog-if 00 [Normal decode]) Physical Slot: 2 Flags: bus master, fast devsel, latency 0 Bus: primary=0f, secondary=10, subordinate=14, sec-latency=0 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: f9000000-f92fffff Capabilities: [40] Express Upstream Port, MSI 00 Capabilities: [c0] Power Management version 3 Capabilities: [100] Advanced Error Reporting Capabilities: [200] Virtual Channel Kernel driver in use: pcieport 10:02.0 PCI bridge: Integrated Device Technology, Inc. [IDT] PES24T6G2 PCI Express Gen2 Switch (rev 02) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=10, secondary=11, subordinate=11, sec-latency=0 Capabilities: [40] Express Downstream Port (Slot-), MSI 00 Capabilities: [c0] Power Management version 3 Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [100] Advanced Error Reporting Capabilities: [200] Virtual Channel Kernel driver in use: pcieport 10:03.0 PCI bridge: Integrated Device Technology, Inc. [IDT] PES24T6G2 PCI Express Gen2 Switch (rev 02) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=10, secondary=12, subordinate=12, sec-latency=0 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: f9200000-f92fffff Capabilities: [40] Express Downstream Port (Slot-), MSI 00 Capabilities: [c0] Power Management version 3 Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [100] Advanced Error Reporting Capabilities: [200] Virtual Channel Kernel driver in use: pcieport 10:04.0 PCI bridge: Integrated Device Technology, Inc. [IDT] PES24T6G2 PCI Express Gen2 Switch (rev 02) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=10, secondary=13, subordinate=13, sec-latency=0 Memory behind bridge: f9000000-f90fffff Capabilities: [40] Express Downstream Port (Slot-), MSI 00 Capabilities: [c0] Power Management version 3 Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [100] Advanced Error Reporting Capabilities: [200] Virtual Channel Kernel driver in use: pcieport 10:05.0 PCI bridge: Integrated Device Technology, Inc. [IDT] PES24T6G2 PCI Express Gen2 Switch (rev 02) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=10, secondary=14, subordinate=14, sec-latency=0 Memory behind bridge: f9100000-f91fffff Capabilities: [40] Express Downstream Port (Slot-), MSI 00 Capabilities: [c0] Power Management version 3 Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [100] Advanced Error Reporting Capabilities: [200] Virtual Channel Kernel driver in use: pcieport 12:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9235 PCIe 2.0 x2 4-port SATA 6 Gb/s Controller (rev 11) (prog-if 01 [AHCI 1.0]) Subsystem: Marvell Technology Group Ltd. 88SE9235 PCIe 2.0 x2 4-port SATA 6 Gb/s Controller Flags: bus master, fast devsel, latency 0, IRQ 203 I/O ports at c020 [size=8] I/O ports at c030 [size=4] I/O ports at c028 [size=8] I/O ports at c034 [size=4] I/O ports at c000 [size=32] Memory at f9200000 (32-bit, non-prefetchable) [size=2K] [virtual] Expansion ROM at f9210000 [disabled] [size=64K] Capabilities: [40] Power Management version 3 Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [70] Express Legacy Endpoint, MSI 00 Capabilities: [e0] SATA HBA v0.0 Capabilities: [100] Advanced Error Reporting Kernel driver in use: ahci 13:00.0 Non-Volatile memory controller: Intel Corporation Device f1a8 (rev 03) (prog-if 02 [NVM Express]) Subsystem: Intel Corporation Device 390d Flags: fast devsel, IRQ 24 Memory at f9000000 (64-bit, non-prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Capabilities: [50] MSI: Enable- Count=1/8 Maskable+ 64bit+ Capabilities: [70] Express Endpoint, MSI 00 Capabilities: [b0] MSI-X: Enable- Count=16 Masked- Capabilities: [100] Advanced Error Reporting Capabilities: [158] #19 Capabilities: [178] Latency Tolerance Reporting Capabilities: [180] #1e 14:00.0 Non-Volatile memory controller: Intel Corporation Device f1a8 (rev 03) (prog-if 02 [NVM Express]) Subsystem: Intel Corporation Device 390d Flags: bus master, fast devsel, latency 0, IRQ 34 Memory at f9100000 (64-bit, non-prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Capabilities: [50] MSI: Enable- Count=1/8 Maskable+ 64bit+ Capabilities: [70] Express Endpoint, MSI 00 Capabilities: [b0] MSI-X: Enable+ Count=16 Masked- Capabilities: [100] Advanced Error Reporting Capabilities: [158] #19 Capabilities: [178] Latency Tolerance Reporting Capabilities: [180] #1e Kernel driver in use: nvme 28:00.0 PCI bridge: Integrated Device Technology, Inc. [IDT] PES24T6G2 PCI Express Gen2 Switch (rev 02) (prog-if 00 [Normal decode]) Physical Slot: 4 Flags: bus master, fast devsel, latency 0 Bus: primary=28, secondary=29, subordinate=2d, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: f8000000-f82fffff Capabilities: [40] Express Upstream Port, MSI 00 Capabilities: [c0] Power Management version 3 Capabilities: [100] Advanced Error Reporting Capabilities: [200] Virtual Channel Kernel driver in use: pcieport 29:02.0 PCI bridge: Integrated Device Technology, Inc. [IDT] PES24T6G2 PCI Express Gen2 Switch (rev 02) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=29, secondary=2a, subordinate=2a, sec-latency=0 Capabilities: [40] Express Downstream Port (Slot-), MSI 00 Capabilities: [c0] Power Management version 3 Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [100] Advanced Error Reporting Capabilities: [200] Virtual Channel Kernel driver in use: pcieport 29:03.0 PCI bridge: Integrated Device Technology, Inc. [IDT] PES24T6G2 PCI Express Gen2 Switch (rev 02) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=29, secondary=2b, subordinate=2b, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: f8200000-f82fffff Capabilities: [40] Express Downstream Port (Slot-), MSI 00 Capabilities: [c0] Power Management version 3 Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [100] Advanced Error Reporting Capabilities: [200] Virtual Channel Kernel driver in use: pcieport 29:04.0 PCI bridge: Integrated Device Technology, Inc. [IDT] PES24T6G2 PCI Express Gen2 Switch (rev 02) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=29, secondary=2c, subordinate=2c, sec-latency=0 Memory behind bridge: f8000000-f80fffff Capabilities: [40] Express Downstream Port (Slot-), MSI 00 Capabilities: [c0] Power Management version 3 Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [100] Advanced Error Reporting Capabilities: [200] Virtual Channel Kernel driver in use: pcieport 29:05.0 PCI bridge: Integrated Device Technology, Inc. [IDT] PES24T6G2 PCI Express Gen2 Switch (rev 02) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=29, secondary=2d, subordinate=2d, sec-latency=0 Memory behind bridge: f8100000-f81fffff Capabilities: [40] Express Downstream Port (Slot-), MSI 00 Capabilities: [c0] Power Management version 3 Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [100] Advanced Error Reporting Capabilities: [200] Virtual Channel Kernel driver in use: pcieport 2b:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9235 PCIe 2.0 x2 4-port SATA 6 Gb/s Controller (rev 11) (prog-if 01 [AHCI 1.0]) Subsystem: Marvell Technology Group Ltd. 88SE9235 PCIe 2.0 x2 4-port SATA 6 Gb/s Controller Flags: bus master, fast devsel, latency 0, IRQ 204 I/O ports at d020 [size=8] I/O ports at d030 [size=4] I/O ports at d028 [size=8] I/O ports at d034 [size=4] I/O ports at d000 [size=32] Memory at f8200000 (32-bit, non-prefetchable) [size=2K] [virtual] Expansion ROM at f8210000 [disabled] [size=64K] Capabilities: [40] Power Management version 3 Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [70] Express Legacy Endpoint, MSI 00 Capabilities: [e0] SATA HBA v0.0 Capabilities: [100] Advanced Error Reporting Kernel driver in use: ahci 2c:00.0 Non-Volatile memory controller: Intel Corporation Device f1a8 (rev 03) (prog-if 02 [NVM Express]) Subsystem: Intel Corporation Device 390d Flags: bus master, fast devsel, latency 0, IRQ 30 Memory at f8000000 (64-bit, non-prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Capabilities: [50] MSI: Enable- Count=1/8 Maskable+ 64bit+ Capabilities: [70] Express Endpoint, MSI 00 Capabilities: [b0] MSI-X: Enable+ Count=16 Masked- Capabilities: [100] Advanced Error Reporting Capabilities: [158] #19 Capabilities: [178] Latency Tolerance Reporting Capabilities: [180] #1e Kernel driver in use: nvme 2d:00.0 Non-Volatile memory controller: Intel Corporation Device f1a8 (rev 03) (prog-if 02 [NVM Express]) Subsystem: Intel Corporation Device 390d Flags: bus master, fast devsel, latency 0, IRQ 37 Memory at f8100000 (64-bit, non-prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Capabilities: [50] MSI: Enable- Count=1/8 Maskable+ 64bit+ Capabilities: [70] Express Endpoint, MSI 00 Capabilities: [b0] MSI-X: Enable+ Count=16 Masked- Capabilities: [100] Advanced Error Reporting Capabilities: [158] #19 Capabilities: [178] Latency Tolerance Reporting Capabilities: [180] #1e Kernel driver in use: nvme 37:05.0 FireWire (IEEE 1394): LSI Corporation FW322/323 [TrueFire] 1394a Controller (rev 70) (prog-if 10 [OHCI]) Subsystem: Hewlett-Packard Company Device 130a Flags: bus master, medium devsel, latency 32, IRQ 19 Memory at fd000000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Kernel driver in use: firewire_ohci 37:09.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Rage XL PCI (rev 27) (prog-if 00 [VGA controller]) Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Rage XL Physical Slot: 6 Flags: bus master, stepping, medium devsel, latency 32, IRQ 5 Memory at fc000000 (32-bit, non-prefetchable) [size=16M] I/O ports at e000 [size=256] Memory at fd001000 (32-bit, non-prefetchable) [size=4K] [virtual] Expansion ROM at fd020000 [disabled] [size=128K] Capabilities: [5c] Power Management version 2 3e:00.0 Host bridge: Intel Corporation Xeon 5600 Series QuickPath Architecture Generic Non-core Registers (rev 02) Subsystem: Hewlett-Packard Company Device 130a Flags: bus master, fast devsel, latency 0 3e:00.1 Host bridge: Intel Corporation Xeon 5600 Series QuickPath Architecture System Address Decoder (rev 02) Subsystem: Hewlett-Packard Company Device 130a Flags: bus master, fast devsel, latency 0 3e:02.0 Host bridge: Intel Corporation Xeon 5600 Series QPI Link 0 (rev 02) Subsystem: Hewlett-Packard Company Device 130a Flags: bus master, fast devsel, latency 0 3e:02.1 Host bridge: Intel Corporation Xeon 5600 Series QPI Physical 0 (rev 02) Subsystem: Hewlett-Packard Company Device 130a Flags: bus master, fast devsel, latency 0 3e:02.2 Host bridge: Intel Corporation Xeon 5600 Series Mirror Port Link 0 (rev 02) Subsystem: Hewlett-Packard Company Device 130a Flags: bus master, fast devsel, latency 0 3e:02.3 Host bridge: Intel Corporation Xeon 5600 Series Mirror Port Link 1 (rev 02) Subsystem: Hewlett-Packard Company Device 130a Flags: bus master, fast devsel, latency 0 3e:02.4 Host bridge: Intel Corporation Xeon 5600 Series QPI Link 1 (rev 02) Subsystem: Hewlett-Packard Company Device 130a Flags: bus master, fast devsel, latency 0 3e:02.5 Host bridge: Intel Corporation Xeon 5600 Series QPI Physical 1 (rev 02) Subsystem: Hewlett-Packard Company Device 130a Flags: bus master, fast devsel, latency 0 3e:03.0 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Registers (rev 02) Subsystem: Hewlett-Packard Company Device 130a Flags: bus master, fast devsel, latency 0 3e:03.1 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Target Address Decoder (rev 02) Subsystem: Hewlett-Packard Company Device 130a Flags: bus master, fast devsel, latency 0 3e:03.2 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller RAS Registers (rev 02) Subsystem: Hewlett-Packard Company Device 130a Flags: bus master, fast devsel, latency 0 3e:03.4 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Test Registers (rev 02) Subsystem: Hewlett-Packard Company Device 130a Flags: bus master, fast devsel, latency 0 3e:04.0 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Control (rev 02) Subsystem: Hewlett-Packard Company Device 130a Flags: bus master, fast devsel, latency 0 3e:04.1 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Address (rev 02) Subsystem: Hewlett-Packard Company Device 130a Flags: bus master, fast devsel, latency 0 3e:04.2 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Rank (rev 02) Subsystem: Hewlett-Packard Company Device 130a Flags: bus master, fast devsel, latency 0 3e:04.3 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Thermal Control (rev 02) Subsystem: Hewlett-Packard Company Device 130a Flags: bus master, fast devsel, latency 0 3e:05.0 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Control (rev 02) Subsystem: Hewlett-Packard Company Device 130a Flags: bus master, fast devsel, latency 0 3e:05.1 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Address (rev 02) Subsystem: Hewlett-Packard Company Device 130a Flags: bus master, fast devsel, latency 0 3e:05.2 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Rank (rev 02) Subsystem: Hewlett-Packard Company Device 130a Flags: bus master, fast devsel, latency 0 3e:05.3 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Thermal Control (rev 02) Subsystem: Hewlett-Packard Company Device 130a Flags: bus master, fast devsel, latency 0 3e:06.0 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Control (rev 02) Subsystem: Hewlett-Packard Company Device 130a Flags: bus master, fast devsel, latency 0 3e:06.1 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Address (rev 02) Subsystem: Hewlett-Packard Company Device 130a Flags: bus master, fast devsel, latency 0 3e:06.2 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Rank (rev 02) Subsystem: Hewlett-Packard Company Device 130a Flags: bus master, fast devsel, latency 0 3e:06.3 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Thermal Control (rev 02) Subsystem: Hewlett-Packard Company Device 130a Flags: bus master, fast devsel, latency 0 3f:00.0 Host bridge: Intel Corporation Xeon 5600 Series QuickPath Architecture Generic Non-core Registers (rev 02) Subsystem: Hewlett-Packard Company Device 130a Flags: bus master, fast devsel, latency 0 3f:00.1 Host bridge: Intel Corporation Xeon 5600 Series QuickPath Architecture System Address Decoder (rev 02) Subsystem: Hewlett-Packard Company Device 130a Flags: bus master, fast devsel, latency 0 3f:02.0 Host bridge: Intel Corporation Xeon 5600 Series QPI Link 0 (rev 02) Subsystem: Hewlett-Packard Company Device 130a Flags: bus master, fast devsel, latency 0 3f:02.1 Host bridge: Intel Corporation Xeon 5600 Series QPI Physical 0 (rev 02) Subsystem: Hewlett-Packard Company Device 130a Flags: bus master, fast devsel, latency 0 3f:02.2 Host bridge: Intel Corporation Xeon 5600 Series Mirror Port Link 0 (rev 02) Subsystem: Hewlett-Packard Company Device 130a Flags: bus master, fast devsel, latency 0 3f:02.3 Host bridge: Intel Corporation Xeon 5600 Series Mirror Port Link 1 (rev 02) Subsystem: Hewlett-Packard Company Device 130a Flags: bus master, fast devsel, latency 0 3f:02.4 Host bridge: Intel Corporation Xeon 5600 Series QPI Link 1 (rev 02) Subsystem: Hewlett-Packard Company Device 130a Flags: bus master, fast devsel, latency 0 3f:02.5 Host bridge: Intel Corporation Xeon 5600 Series QPI Physical 1 (rev 02) Subsystem: Hewlett-Packard Company Device 130a Flags: bus master, fast devsel, latency 0 3f:03.0 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Registers (rev 02) Subsystem: Hewlett-Packard Company Device 130a Flags: bus master, fast devsel, latency 0 3f:03.1 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Target Address Decoder (rev 02) Subsystem: Hewlett-Packard Company Device 130a Flags: bus master, fast devsel, latency 0 3f:03.2 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller RAS Registers (rev 02) Subsystem: Hewlett-Packard Company Device 130a Flags: bus master, fast devsel, latency 0 3f:03.4 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Test Registers (rev 02) Subsystem: Hewlett-Packard Company Device 130a Flags: bus master, fast devsel, latency 0 3f:04.0 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Control (rev 02) Subsystem: Hewlett-Packard Company Device 130a Flags: bus master, fast devsel, latency 0 3f:04.1 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Address (rev 02) Subsystem: Hewlett-Packard Company Device 130a Flags: bus master, fast devsel, latency 0 3f:04.2 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Rank (rev 02) Subsystem: Hewlett-Packard Company Device 130a Flags: bus master, fast devsel, latency 0 3f:04.3 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Thermal Control (rev 02) Subsystem: Hewlett-Packard Company Device 130a Flags: bus master, fast devsel, latency 0 3f:05.0 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Control (rev 02) Subsystem: Hewlett-Packard Company Device 130a Flags: bus master, fast devsel, latency 0 3f:05.1 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Address (rev 02) Subsystem: Hewlett-Packard Company Device 130a Flags: bus master, fast devsel, latency 0 3f:05.2 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Rank (rev 02) Subsystem: Hewlett-Packard Company Device 130a Flags: bus master, fast devsel, latency 0 3f:05.3 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Thermal Control (rev 02) Subsystem: Hewlett-Packard Company Device 130a Flags: bus master, fast devsel, latency 0 3f:06.0 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Control (rev 02) Subsystem: Hewlett-Packard Company Device 130a Flags: bus master, fast devsel, latency 0 3f:06.1 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Address (rev 02) Subsystem: Hewlett-Packard Company Device 130a Flags: bus master, fast devsel, latency 0 [root@vhost0 ~]# dmesg [ 0.000000] PAT configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.1.12-124.21.1.el6uek.x86_64 (mockbuild@ca-build84.us.oracle.com) (gcc version 4.9.2 20150212 (Red Hat 4.9.2-6.2.0.3) (GCC) ) #2 SMP Tue Nov 6 13:31:13 PST 2018 [ 0.000000] Command line: placeholder root=UUID=9bcba43f-a6b8-45d4-a58e-7335931f88da ro rd_NO_LUKS rd_NO_LVM LANG=en_US.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rhgb quiet [ 0.000000] Released 0 page(s) [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000094fff] usable [ 0.000000] Xen: [mem 0x0000000000095800-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x000000004f86afff] usable [ 0.000000] Xen: [mem 0x00000000eefa5800-0x00000000f3ffffff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fed3ffff] reserved [ 0.000000] Xen: [mem 0x00000000fed45000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Hewlett-Packard HP Z600 Workstation/0B54h, BIOS 786G4 v03.60 02/24/2016 [ 0.000000] Hypervisor detected: Xen [ 0.000000] Kernel/User page tables isolation: disabled [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] AGP: No AGP bridge found [ 0.000000] e820: last_pfn = 0x4f86b max_arch_pfn = 0x400000000 [ 0.000000] Base memory trampoline at [ffff88000008e000] 8e000 size 28672 [ 0.000000] BRK [0x02158000, 0x02158fff] PGTABLE [ 0.000000] BRK [0x02159000, 0x02159fff] PGTABLE [ 0.000000] BRK [0x0215a000, 0x0215afff] PGTABLE [ 0.000000] BRK [0x0215b000, 0x0215bfff] PGTABLE [ 0.000000] BRK [0x0215c000, 0x0215cfff] PGTABLE [ 0.000000] BRK [0x0215d000, 0x0215dfff] PGTABLE [ 0.000000] RAMDISK: [mem 0x04000000-0x06541fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000E9010 000024 (v02 HPQOEM) [ 0.000000] ACPI: XSDT 0x00000000EEFB88E8 000074 (v01 HPQOEM SLIC-WKS 20160224 00000000) [ 0.000000] ACPI: FACP 0x00000000EEFB8A88 0000F4 (v03 HPQOEM TYLSBURG 00000001 00000000) [ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aEventBlock: 32/16 (20150410/tbfadt-623) [ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20150410/tbfadt-623) [ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aEventBlock: 16, using default 32 (20150410/tbfadt-704) [ 0.000000] ACPI: DSDT 0x00000000EEFB941B 00A674 (v01 COMPAQ DSDT_PRJ 00000001 MSFT 0100000E) [ 0.000000] ACPI: FACS 0x00000000EEFB8800 000040 [ 0.000000] ACPI: FACS 0x00000000EEFB8800 000040 [ 0.000000] ACPI: APIC 0x00000000EEFB8B7C 000188 (v01 HPQOEM TYLSBURG 00000001 00000000) [ 0.000000] ACPI: ASF! 0x00000000EEFB8D04 000063 (v32 HPQOEM TYLSBURG 00000001 00000000) [ 0.000000] ACPI: MCFG 0x00000000EEFB8D67 00003C (v01 HPQOEM TYLSBURG 00000001 00000000) [ 0.000000] ACPI: TCPA 0x00000000EEFB8DA3 000032 (v01 HPQOEM TYLSBURG 00000001 00000000) [ 0.000000] ACPI: SLIC 0x00000000EEFB8DD5 000176 (v01 HPQOEM SLIC-WKS 00000001 00000000) [ 0.000000] ACPI: HPET 0x00000000EEFB8F4B 000038 (v01 HPQOEM TYLSBURG 00000001 00000000) [ 0.000000] ACPI: XMAR 0x00000000EEFB8F83 000170 (v01 HPQOEM TYLSBURG 00000001 00000000) [ 0.000000] ACPI: SRAT 0x00000000EEFB9123 0002F8 (v02 HPQOEM TYLSBURG 00000001 00000000) [ 0.000000] ACPI: SSDT 0x00000000EEFC4E11 0075FC (v01 INTEL PPM RCM 80000001 INTL 20061109) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Setting APIC routing to Xen PV. [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000004f86afff] [ 0.000000] NODE_DATA(0) allocated [mem 0x4f573000-0x4f599fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x000000004f86afff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000094fff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000004f86afff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000004f86afff] [ 0.000000] On node 0 totalpages: 325631 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 22 pages reserved [ 0.000000] DMA zone: 3988 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 5026 pages used for memmap [ 0.000000] DMA32 zone: 321643 pages, LIFO batch:31 [ 0.000000] p2m virtual area at ffffc90000000000, size is 400000 [ 0.000000] Remapped 107 page(s) [ 0.000000] ACPI: PM-Timer IO Port: 0xf808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] IOAPIC[1]: apic_id 2, version 32, address 0xfec10000, GSI 24-47 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] smpboot: Allowing 32 CPUs, 8 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00095000-0x00095fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00096000-0x000fffff] [ 0.000000] e820: [mem 0x4f86b000-0xeefa57ff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 4.4.4OVM (preserve-AD) [ 0.000000] clocksource refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 35 pages/cpu @ffff88004d000000 s104536 r8192 d30632 u262144 [ 0.000000] pcpu-alloc: s104536 r8192 d30632 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 [ 0.000000] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31 [ 0.000000] xen: PV spinlocks enabled [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 320519 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: placeholder root=UUID=9bcba43f-a6b8-45d4-a58e-7335931f88da ro rd_NO_LUKS rd_NO_LVM LANG=en_US.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rhgb quiet [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] software IO TLB [mem 0x49000000-0x4d000000] (64MB) mapped at [ffff880049000000-ffff88004cffffff] [ 0.000000] Memory: 1149992K/1302524K available (7148K kernel code, 1654K rwdata, 3900K rodata, 1988K init, 3012K bss, 152532K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=20, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=20. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=20 [ 0.000000] NR_IRQS:524544 nr_irqs:992 16 [ 0.000000] xen:events: Using FIFO-based ABI [ 0.000000] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.000000] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.000000] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.000000] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.000000] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.000000] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.000000] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.000000] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.000000] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.000000] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.000000] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.000000] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.000000] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.000000] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.000000] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-19. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000000] Xen: using vcpuop timer interface [ 0.000000] installing Xen timer for CPU 0 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3058.885 MHz processor [ 4.939039] Calibrating delay loop (skipped), value calculated using timer frequency.. 6118.14 BogoMIPS (lpj=3059072) [ 4.939041] pid_max: default: 32768 minimum: 301 [ 4.939050] ACPI: Core revision 20150410 [ 4.969044] ACPI: All ACPI Tables successfully acquired [ 4.969364] Security Framework initialized [ 4.969371] SELinux: Initializing. [ 4.969379] SELinux: Starting in permissive mode [ 4.969727] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 4.970188] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 4.970345] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 4.970353] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 4.970623] Initializing cgroup subsys blkio [ 4.970627] Initializing cgroup subsys memory [ 4.970637] Initializing cgroup subsys devices [ 4.970640] Initializing cgroup subsys freezer [ 4.970643] Initializing cgroup subsys net_cls [ 4.970647] Initializing cgroup subsys perf_event [ 4.970651] Initializing cgroup subsys net_prio [ 4.970653] Initializing cgroup subsys hugetlb [ 4.970704] FEATURE SPEC_CTRL Not Present [ 4.970704] FEATURE IBPB Not Present [ 4.970724] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 4.970725] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 4.970729] mce: CPU supports 2 MCE banks [ 4.970747] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7 [ 4.970748] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 4.970752] Spectre V2 : Options: retpoline [ 4.971139] Spectre V2 : Mitigation: Full generic retpoline [ 4.971140] Spectre V2 : Filling RSB on context switch [ 4.971142] Speculative Store Bypass: Vulnerable [ 4.971392] Freeing SMP alternatives memory: 28K (ffffffff81e5e000 - ffffffff81e65000) [ 4.974748] ftrace: allocating 27423 entries in 108 pages [ 4.998056] cpu 0 spinlock event irq 49 [ 4.998068] VPMU disabled by hypervisor. [ 5.015200] Performance Events: unsupported p6 CPU model 44 no PMU driver, software events only. [ 5.016162] NMI watchdog: disabled (cpu0): hardware events not enabled [ 5.016164] NMI watchdog: Shutting down hard lockup detector on all cpus [ 5.016307] installing Xen timer for CPU 1 [ 5.016321] cpu 1 spinlock event irq 56 [ 5.016761] installing Xen timer for CPU 2 [ 5.016775] cpu 2 spinlock event irq 63 [ 5.017122] installing Xen timer for CPU 3 [ 5.017136] cpu 3 spinlock event irq 70 [ 5.017466] installing Xen timer for CPU 4 [ 5.017479] cpu 4 spinlock event irq 77 [ 5.017805] installing Xen timer for CPU 5 [ 5.017822] cpu 5 spinlock event irq 84 [ 5.018169] installing Xen timer for CPU 6 [ 5.018183] cpu 6 spinlock event irq 91 [ 5.018513] installing Xen timer for CPU 7 [ 5.018528] cpu 7 spinlock event irq 98 [ 5.018849] installing Xen timer for CPU 8 [ 5.018863] cpu 8 spinlock event irq 105 [ 5.019212] installing Xen timer for CPU 9 [ 5.019228] cpu 9 spinlock event irq 112 [ 5.019554] installing Xen timer for CPU 10 [ 5.019569] cpu 10 spinlock event irq 119 [ 5.019850] installing Xen timer for CPU 11 [ 5.019862] cpu 11 spinlock event irq 126 [ 5.020176] installing Xen timer for CPU 12 [ 5.020187] cpu 12 spinlock event irq 133 [ 5.020545] installing Xen timer for CPU 13 [ 5.020558] cpu 13 spinlock event irq 140 [ 5.020856] installing Xen timer for CPU 14 [ 5.020868] cpu 14 spinlock event irq 147 [ 5.021188] installing Xen timer for CPU 15 [ 5.021201] cpu 15 spinlock event irq 154 [ 5.021503] installing Xen timer for CPU 16 [ 5.021514] cpu 16 spinlock event irq 161 [ 5.021814] installing Xen timer for CPU 17 [ 5.021826] cpu 17 spinlock event irq 168 [ 5.022144] installing Xen timer for CPU 18 [ 5.022159] cpu 18 spinlock event irq 175 [ 5.022465] installing Xen timer for CPU 19 [ 5.022478] cpu 19 spinlock event irq 182 [ 5.022673] x86: Booted up 1 node, 20 CPUs [ 5.023279] devtmpfs: initialized [ 5.026327] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 5.026621] pinctrl core: initialized pinctrl subsystem [ 5.026880] NET: Registered protocol family 16 [ 5.026899] xen:grant_table: Grant tables using version 1 layout [ 5.026936] Grant table initialized [ 5.027319] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 5.027321] ACPI: bus type PCI registered [ 5.027323] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 5.027655] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 5.027658] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 [ 5.035920] PCI: Using configuration type 1 for base access [ 5.041907] ACPI: Added _OSI(Module Device) [ 5.041909] ACPI: Added _OSI(Processor Device) [ 5.041911] ACPI: Added _OSI(3.0 _SCP Extensions) [ 5.041912] ACPI: Added _OSI(Processor Aggregator Device) [ 5.044346] xen: registering gsi 9 triggering 0 polarity 0 [ 5.052898] ACPI: Interpreter enabled [ 5.052905] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150410/hwxface-580) [ 5.052909] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150410/hwxface-580) [ 5.052921] ACPI: (supports S0 S3 S4 S5) [ 5.052922] ACPI: Using IOAPIC for interrupt routing [ 5.052945] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 5.058803] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3d]) [ 5.058809] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 5.058875] ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20150410/dsfield-211) [ 5.058879] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff880048cb6fa0), AE_ALREADY_EXISTS (20150410/psparse-536) [ 5.058887] acpi PNP0A08:00: _OSC failed (AE_ALREADY_EXISTS); disabling ASPM [ 5.059093] acpi PNP0A08:00: host bridge window expanded to [io 0x0000-0x03af window]; [io 0x0000-0x03af window] ignored [ 5.059240] PCI host bridge to bus 0000:00 [ 5.059243] pci_bus 0000:00: root bus resource [bus 00-3d] [ 5.059246] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 5.059247] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfdffffff window] [ 5.059250] pci_bus 0000:00: root bus resource [mem 0xfed00000-0xfed003ff window] [ 5.059251] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] [ 5.059253] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 5.059255] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 5.059257] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 5.059259] pci_bus 0000:00: root bus resource [io 0x0d00-0x0fff window] [ 5.059261] pci_bus 0000:00: root bus resource [io 0x1000-0xefff window] [ 5.059282] pci 0000:00:00.0: [8086:3406] type 00 class 0x060000 [ 5.059408] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 5.059528] pci 0000:00:01.0: [8086:3408] type 01 class 0x060400 [ 5.059645] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 5.059692] pci 0000:00:01.0: System wakeup disabled by ACPI [ 5.059762] pci 0000:00:03.0: [8086:340a] type 01 class 0x060400 [ 5.059877] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 5.059921] pci 0000:00:03.0: System wakeup disabled by ACPI [ 5.059993] pci 0000:00:07.0: [8086:340e] type 01 class 0x060400 [ 5.060110] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 5.060155] pci 0000:00:07.0: System wakeup disabled by ACPI [ 5.060227] pci 0000:00:10.0: [8086:3425] type 00 class 0x080000 [ 5.060406] pci 0000:00:10.1: [8086:3426] type 00 class 0x080000 [ 5.060573] pci 0000:00:11.0: [8086:3427] type 00 class 0x080000 [ 5.060741] pci 0000:00:11.1: [8086:3428] type 00 class 0x080000 [ 5.060901] pci 0000:00:14.0: [8086:342e] type 00 class 0x080000 [ 5.061084] pci 0000:00:14.1: [8086:3422] type 00 class 0x080000 [ 5.061261] pci 0000:00:14.2: [8086:3423] type 00 class 0x080000 [ 5.061452] pci 0000:00:15.0: [8086:342f] type 00 class 0x080020 [ 5.061628] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300 [ 5.061714] pci 0000:00:1a.0: reg 0x20: [io 0xb000-0xb01f] [ 5.061812] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 5.061868] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300 [ 5.061952] pci 0000:00:1a.1: reg 0x20: [io 0xb020-0xb03f] [ 5.062050] pci 0000:00:1a.1: System wakeup disabled by ACPI [ 5.062106] pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300 [ 5.062191] pci 0000:00:1a.2: reg 0x20: [io 0xb040-0xb05f] [ 5.062290] pci 0000:00:1a.2: System wakeup disabled by ACPI [ 5.062364] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320 [ 5.062398] pci 0000:00:1a.7: reg 0x10: [mem 0xfa004800-0xfa004bff] [ 5.062558] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 5.062601] pci 0000:00:1a.7: System wakeup disabled by ACPI [ 5.062679] pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300 [ 5.062711] pci 0000:00:1b.0: reg 0x10: [mem 0xfa000000-0xfa003fff 64bit] [ 5.062845] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 5.062951] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400 [ 5.063079] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 5.063124] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 5.063196] pci 0000:00:1c.5: [8086:3a4a] type 01 class 0x060400 [ 5.063325] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 5.063379] pci 0000:00:1c.5: System wakeup disabled by ACPI [ 5.063448] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300 [ 5.063542] pci 0000:00:1d.0: reg 0x20: [io 0xb060-0xb07f] [ 5.063645] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 5.063704] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300 [ 5.063788] pci 0000:00:1d.1: reg 0x20: [io 0xb080-0xb09f] [ 5.063886] pci 0000:00:1d.1: System wakeup disabled by ACPI [ 5.063944] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300 [ 5.064028] pci 0000:00:1d.2: reg 0x20: [io 0xb0a0-0xb0bf] [ 5.064126] pci 0000:00:1d.2: System wakeup disabled by ACPI [ 5.064196] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320 [ 5.064229] pci 0000:00:1d.7: reg 0x10: [mem 0xfa004c00-0xfa004fff] [ 5.064385] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 5.064429] pci 0000:00:1d.7: System wakeup disabled by ACPI [ 5.064497] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 5.064634] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 5.064694] pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100 [ 5.064834] pci 0000:00:1f.0: can't claim BAR 13 [io 0xf800-0xf87f]: no compatible bridge window [ 5.064841] pci 0000:00:1f.0: can't claim BAR 14 [io 0xfa00-0xfa3f]: no compatible bridge window [ 5.064846] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0400 (mask 007f) [ 5.064850] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0480 (mask 000f) [ 5.064854] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0cb0 (mask 000f) [ 5.064987] pci 0000:00:1f.2: [8086:2822] type 00 class 0x010400 [ 5.065019] pci 0000:00:1f.2: reg 0x10: [io 0xb100-0xb107] [ 5.065034] pci 0000:00:1f.2: reg 0x14: [io 0xb110-0xb113] [ 5.065049] pci 0000:00:1f.2: reg 0x18: [io 0xb108-0xb10f] [ 5.065065] pci 0000:00:1f.2: reg 0x1c: [io 0xb114-0xb117] [ 5.065080] pci 0000:00:1f.2: reg 0x20: [io 0xb0c0-0xb0df] [ 5.065095] pci 0000:00:1f.2: reg 0x24: [mem 0xfa004000-0xfa0047ff] [ 5.065172] pci 0000:00:1f.2: PME# supported from D3hot [ 5.065345] pci 0000:00:01.0: PCI bridge to [bus 03] [ 5.065467] pci 0000:0f:00.0: [111d:806e] type 01 class 0x060400 [ 5.065612] pci 0000:0f:00.0: PME# supported from D0 D3hot D3cold [ 5.067593] pci 0000:00:03.0: PCI bridge to [bus 0f-14] [ 5.067600] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff] [ 5.067605] pci 0000:00:03.0: bridge window [mem 0xf9000000-0xf92fffff] [ 5.067704] pci 0000:10:02.0: [111d:806e] type 01 class 0x060400 [ 5.067852] pci 0000:10:02.0: PME# supported from D0 D3hot D3cold [ 5.067954] pci 0000:10:03.0: [111d:806e] type 01 class 0x060400 [ 5.068100] pci 0000:10:03.0: PME# supported from D0 D3hot D3cold [ 5.068200] pci 0000:10:04.0: [111d:806e] type 01 class 0x060400 [ 5.068345] pci 0000:10:04.0: PME# supported from D0 D3hot D3cold [ 5.068449] pci 0000:10:05.0: [111d:806e] type 01 class 0x060400 [ 5.068605] pci 0000:10:05.0: PME# supported from D0 D3hot D3cold [ 5.068785] pci 0000:0f:00.0: PCI bridge to [bus 10-14] [ 5.068797] pci 0000:0f:00.0: bridge window [io 0xc000-0xcfff] [ 5.068803] pci 0000:0f:00.0: bridge window [mem 0xf9000000-0xf92fffff] [ 5.068878] pci 0000:10:02.0: PCI bridge to [bus 11] [ 5.068993] pci 0000:12:00.0: [1b4b:9235] type 00 class 0x010601 [ 5.069019] pci 0000:12:00.0: reg 0x10: [io 0xc020-0xc027] [ 5.069037] pci 0000:12:00.0: reg 0x14: [io 0xc030-0xc033] [ 5.069054] pci 0000:12:00.0: reg 0x18: [io 0xc028-0xc02f] [ 5.069071] pci 0000:12:00.0: reg 0x1c: [io 0xc034-0xc037] [ 5.069089] pci 0000:12:00.0: reg 0x20: [io 0xc000-0xc01f] [ 5.069106] pci 0000:12:00.0: reg 0x24: [mem 0xf9200000-0xf92007ff] [ 5.069124] pci 0000:12:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 5.069202] pci 0000:12:00.0: PME# supported from D3hot [ 5.069327] pci 0000:10:03.0: PCI bridge to [bus 12] [ 5.069338] pci 0000:10:03.0: bridge window [io 0xc000-0xcfff] [ 5.069344] pci 0000:10:03.0: bridge window [mem 0xf9200000-0xf92fffff] [ 5.069454] pci 0000:13:00.0: [8086:f1a8] type 00 class 0x010802 [ 5.069495] pci 0000:13:00.0: reg 0x10: [mem 0xf9000000-0xf9003fff 64bit] [ 5.069605] pci 0000:13:00.0: can't set Max Payload Size to 256; if necessary, use "pci=pcie_bus_safe" and report a bug [ 5.069859] pci 0000:10:04.0: PCI bridge to [bus 13] [ 5.069875] pci 0000:10:04.0: bridge window [mem 0xf9000000-0xf90fffff] [ 5.069982] pci 0000:14:00.0: [8086:f1a8] type 00 class 0x010802 [ 5.070025] pci 0000:14:00.0: reg 0x10: [mem 0xf9100000-0xf9103fff 64bit] [ 5.070127] pci 0000:14:00.0: can't set Max Payload Size to 256; if necessary, use "pci=pcie_bus_safe" and report a bug [ 5.070374] pci 0000:10:05.0: PCI bridge to [bus 14] [ 5.070390] pci 0000:10:05.0: bridge window [mem 0xf9100000-0xf91fffff] [ 5.070561] pci 0000:28:00.0: [111d:806e] type 01 class 0x060400 [ 5.070705] pci 0000:28:00.0: PME# supported from D0 D3hot D3cold [ 5.072626] pci 0000:00:07.0: PCI bridge to [bus 28-2d] [ 5.072633] pci 0000:00:07.0: bridge window [io 0xd000-0xdfff] [ 5.072638] pci 0000:00:07.0: bridge window [mem 0xf8000000-0xf82fffff] [ 5.072738] pci 0000:29:02.0: [111d:806e] type 01 class 0x060400 [ 5.072886] pci 0000:29:02.0: PME# supported from D0 D3hot D3cold [ 5.072987] pci 0000:29:03.0: [111d:806e] type 01 class 0x060400 [ 5.073133] pci 0000:29:03.0: PME# supported from D0 D3hot D3cold [ 5.073232] pci 0000:29:04.0: [111d:806e] type 01 class 0x060400 [ 5.073378] pci 0000:29:04.0: PME# supported from D0 D3hot D3cold [ 5.073481] pci 0000:29:05.0: [111d:806e] type 01 class 0x060400 [ 5.073638] pci 0000:29:05.0: PME# supported from D0 D3hot D3cold [ 5.073820] pci 0000:28:00.0: PCI bridge to [bus 29-2d] [ 5.073832] pci 0000:28:00.0: bridge window [io 0xd000-0xdfff] [ 5.073838] pci 0000:28:00.0: bridge window [mem 0xf8000000-0xf82fffff] [ 5.073915] pci 0000:29:02.0: PCI bridge to [bus 2a] [ 5.074029] pci 0000:2b:00.0: [1b4b:9235] type 00 class 0x010601 [ 5.074055] pci 0000:2b:00.0: reg 0x10: [io 0xd020-0xd027] [ 5.074073] pci 0000:2b:00.0: reg 0x14: [io 0xd030-0xd033] [ 5.074090] pci 0000:2b:00.0: reg 0x18: [io 0xd028-0xd02f] [ 5.074107] pci 0000:2b:00.0: reg 0x1c: [io 0xd034-0xd037] [ 5.074125] pci 0000:2b:00.0: reg 0x20: [io 0xd000-0xd01f] [ 5.074142] pci 0000:2b:00.0: reg 0x24: [mem 0xf8200000-0xf82007ff] [ 5.074160] pci 0000:2b:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 5.074238] pci 0000:2b:00.0: PME# supported from D3hot [ 5.074362] pci 0000:29:03.0: PCI bridge to [bus 2b] [ 5.074373] pci 0000:29:03.0: bridge window [io 0xd000-0xdfff] [ 5.074380] pci 0000:29:03.0: bridge window [mem 0xf8200000-0xf82fffff] [ 5.074489] pci 0000:2c:00.0: [8086:f1a8] type 00 class 0x010802 [ 5.074533] pci 0000:2c:00.0: reg 0x10: [mem 0xf8000000-0xf8003fff 64bit] [ 5.074642] pci 0000:2c:00.0: can't set Max Payload Size to 256; if necessary, use "pci=pcie_bus_safe" and report a bug [ 5.074894] pci 0000:29:04.0: PCI bridge to [bus 2c] [ 5.074910] pci 0000:29:04.0: bridge window [mem 0xf8000000-0xf80fffff] [ 5.075015] pci 0000:2d:00.0: [8086:f1a8] type 00 class 0x010802 [ 5.075056] pci 0000:2d:00.0: reg 0x10: [mem 0xf8100000-0xf8103fff 64bit] [ 5.075157] pci 0000:2d:00.0: can't set Max Payload Size to 256; if necessary, use "pci=pcie_bus_safe" and report a bug [ 5.075403] pci 0000:29:05.0: PCI bridge to [bus 2d] [ 5.075419] pci 0000:29:05.0: bridge window [mem 0xf8100000-0xf81fffff] [ 5.075570] pci 0000:00:1c.0: PCI bridge to [bus 1c] [ 5.075702] pci 0000:01:00.0: [14e4:1684] type 00 class 0x020000 [ 5.075744] pci 0000:01:00.0: reg 0x10: [mem 0xfb000000-0xfb00ffff 64bit] [ 5.075955] pci 0000:01:00.0: PME# supported from D3hot D3cold [ 5.078685] pci 0000:00:1c.5: PCI bridge to [bus 01] [ 5.078703] pci 0000:00:1c.5: bridge window [mem 0xfb000000-0xfb0fffff] [ 5.078822] pci 0000:37:05.0: [11c1:5811] type 00 class 0x0c0010 [ 5.078851] pci 0000:37:05.0: reg 0x10: [mem 0xfd000000-0xfd000fff] [ 5.078988] pci 0000:37:05.0: supports D1 D2 [ 5.078990] pci 0000:37:05.0: PME# supported from D0 D1 D2 D3hot [ 5.079074] pci 0000:37:09.0: [1002:4752] type 00 class 0x030000 [ 5.079104] pci 0000:37:09.0: reg 0x10: [mem 0xfc000000-0xfcffffff] [ 5.079123] pci 0000:37:09.0: reg 0x14: [io 0xe000-0xe0ff] [ 5.079141] pci 0000:37:09.0: reg 0x18: [mem 0xfd001000-0xfd001fff] [ 5.079207] pci 0000:37:09.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 5.079254] pci 0000:37:09.0: supports D1 D2 [ 5.079362] pci 0000:00:1e.0: PCI bridge to [bus 37] (subtractive decode) [ 5.079368] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff] [ 5.079374] pci 0000:00:1e.0: bridge window [mem 0xfc000000-0xfd0fffff] [ 5.079384] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 5.079386] pci 0000:00:1e.0: bridge window [mem 0xf8000000-0xfdffffff window] (subtractive decode) [ 5.079388] pci 0000:00:1e.0: bridge window [mem 0xfed00000-0xfed003ff window] (subtractive decode) [ 5.079390] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode) [ 5.079391] pci 0000:00:1e.0: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 5.079393] pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 5.079395] pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 5.079397] pci 0000:00:1e.0: bridge window [io 0x0d00-0x0fff window] (subtractive decode) [ 5.079398] pci 0000:00:1e.0: bridge window [io 0x1000-0xefff window] (subtractive decode) [ 5.079490] xen: registering gsi 13 triggering 1 polarity 0 [ 5.079911] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 14 15) [ 5.079996] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 14 15) [ 5.080082] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 14 15) [ 5.080167] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 14 15) [ 5.080252] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 14 15) [ 5.080336] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 14 15) [ 5.080421] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 14 15) [ 5.080505] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. [ 5.080616] ACPI: PCI Root Bridge [NHL1] (domain 0000 [bus 3f]) [ 5.080620] acpi PNP0A08:02: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 5.080624] acpi PNP0A08:02: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 5.080689] PCI host bridge to bus 0000:3f [ 5.080692] pci_bus 0000:3f: root bus resource [bus 3f] [ 5.080703] pci 0000:3f:00.0: [8086:2c70] type 00 class 0x060000 [ 5.080803] pci 0000:3f:00.1: [8086:2d81] type 00 class 0x060000 [ 5.080909] pci 0000:3f:02.0: [8086:2d90] type 00 class 0x060000 [ 5.081003] pci 0000:3f:02.1: [8086:2d91] type 00 class 0x060000 [ 5.081097] pci 0000:3f:02.2: [8086:2d92] type 00 class 0x060000 [ 5.081191] pci 0000:3f:02.3: [8086:2d93] type 00 class 0x060000 [ 5.081287] pci 0000:3f:02.4: [8086:2d94] type 00 class 0x060000 [ 5.081382] pci 0000:3f:02.5: [8086:2d95] type 00 class 0x060000 [ 5.081478] pci 0000:3f:03.0: [8086:2d98] type 00 class 0x060000 [ 5.081582] pci 0000:3f:03.1: [8086:2d99] type 00 class 0x060000 [ 5.081692] pci 0000:3f:03.2: [8086:2d9a] type 00 class 0x060000 [ 5.081790] pci 0000:3f:03.4: [8086:2d9c] type 00 class 0x060000 [ 5.081889] pci 0000:3f:04.0: [8086:2da0] type 00 class 0x060000 [ 5.081984] pci 0000:3f:04.1: [8086:2da1] type 00 class 0x060000 [ 5.082079] pci 0000:3f:04.2: [8086:2da2] type 00 class 0x060000 [ 5.082174] pci 0000:3f:04.3: [8086:2da3] type 00 class 0x060000 [ 5.082275] pci 0000:3f:05.0: [8086:2da8] type 00 class 0x060000 [ 5.082368] pci 0000:3f:05.1: [8086:2da9] type 00 class 0x060000 [ 5.082462] pci 0000:3f:05.2: [8086:2daa] type 00 class 0x060000 [ 5.082557] pci 0000:3f:05.3: [8086:2dab] type 00 class 0x060000 [ 5.082677] pci 0000:3f:06.0: [8086:2db0] type 00 class 0x060000 [ 5.082775] pci 0000:3f:06.1: [8086:2db1] type 00 class 0x060000 [ 5.082872] pci 0000:3f:06.2: [8086:2db2] type 00 class 0x060000 [ 5.082966] pci 0000:3f:06.3: [8086:2db3] type 00 class 0x060000 [ 5.083164] ACPI: PCI Root Bridge [NHL2] (domain 0000 [bus 3e]) [ 5.083168] acpi PNP0A08:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 5.083172] acpi PNP0A08:03: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 5.083235] PCI host bridge to bus 0000:3e [ 5.083237] pci_bus 0000:3e: root bus resource [bus 3e] [ 5.083247] pci 0000:3e:00.0: [8086:2c70] type 00 class 0x060000 [ 5.083349] pci 0000:3e:00.1: [8086:2d81] type 00 class 0x060000 [ 5.083455] pci 0000:3e:02.0: [8086:2d90] type 00 class 0x060000 [ 5.083550] pci 0000:3e:02.1: [8086:2d91] type 00 class 0x060000 [ 5.083656] pci 0000:3e:02.2: [8086:2d92] type 00 class 0x060000 [ 5.083763] pci 0000:3e:02.3: [8086:2d93] type 00 class 0x060000 [ 5.083862] pci 0000:3e:02.4: [8086:2d94] type 00 class 0x060000 [ 5.083956] pci 0000:3e:02.5: [8086:2d95] type 00 class 0x060000 [ 5.084052] pci 0000:3e:03.0: [8086:2d98] type 00 class 0x060000 [ 5.084146] pci 0000:3e:03.1: [8086:2d99] type 00 class 0x060000 [ 5.084240] pci 0000:3e:03.2: [8086:2d9a] type 00 class 0x060000 [ 5.084336] pci 0000:3e:03.4: [8086:2d9c] type 00 class 0x060000 [ 5.084435] pci 0000:3e:04.0: [8086:2da0] type 00 class 0x060000 [ 5.084529] pci 0000:3e:04.1: [8086:2da1] type 00 class 0x060000 [ 5.084636] pci 0000:3e:04.2: [8086:2da2] type 00 class 0x060000 [ 5.084744] pci 0000:3e:04.3: [8086:2da3] type 00 class 0x060000 [ 5.084846] pci 0000:3e:05.0: [8086:2da8] type 00 class 0x060000 [ 5.084939] pci 0000:3e:05.1: [8086:2da9] type 00 class 0x060000 [ 5.085033] pci 0000:3e:05.2: [8086:2daa] type 00 class 0x060000 [ 5.085131] pci 0000:3e:05.3: [8086:2dab] type 00 class 0x060000 [ 5.085232] pci 0000:3e:06.0: [8086:2db0] type 00 class 0x060000 [ 5.085327] pci 0000:3e:06.1: [8086:2db1] type 00 class 0x060000 [ 5.085423] pci 0000:3e:06.2: [8086:2db2] type 00 class 0x060000 [ 5.085517] pci 0000:3e:06.3: [8086:2db3] type 00 class 0x060000 [ 5.085976] ACPI: Enabled 1 GPEs in block 00 to 3F [ 5.086214] xen:balloon: Initialising balloon driver [ 5.086249] xen_balloon: Initialising balloon driver [ 5.086358] vgaarb: setting as boot device: PCI:0000:37:09.0 [ 5.086361] vgaarb: device added: PCI:0000:37:09.0,decodes=io+mem,owns=io+mem,locks=none [ 5.086367] vgaarb: loaded [ 5.086368] vgaarb: bridge control possible 0000:37:09.0 [ 5.086460] SCSI subsystem initialized [ 5.086615] libata version 3.00 loaded. [ 5.086674] ACPI: bus type USB registered [ 5.086699] usbcore: registered new interface driver usbfs [ 5.086711] usbcore: registered new interface driver hub [ 5.086836] usbcore: registered new device driver usb [ 5.087115] PCI: Using ACPI for IRQ routing [ 5.089786] PCI: pci_cache_line_size set to 64 bytes [ 5.090135] e820: reserve RAM buffer [mem 0x00095000-0x0009ffff] [ 5.090137] e820: reserve RAM buffer [mem 0x4f86b000-0x4fffffff] [ 5.090257] NetLabel: Initializing [ 5.090259] NetLabel: domain hash size = 128 [ 5.090259] NetLabel: protocols = UNLABELED CIPSOv4 [ 5.090272] NetLabel: unlabeled traffic allowed by default [ 5.090338] amd_nb: Cannot enumerate AMD northbridges [ 5.090412] Switched to clocksource xen [ 5.097949] pnp: PnP ACPI init [ 5.097988] xen: registering gsi 8 triggering 1 polarity 0 [ 5.098014] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 5.098022] xen: registering gsi 12 triggering 1 polarity 0 [ 5.098040] pnp 00:01: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active) [ 5.098047] xen: registering gsi 1 triggering 1 polarity 0 [ 5.098064] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active) [ 5.098188] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (disabled) [ 5.098225] pnp 00:04: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) [ 5.098491] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 5.098553] system 00:06: [io 0x0400-0x041f] has been reserved [ 5.098555] system 00:06: [io 0x0420-0x043f] has been reserved [ 5.098557] system 00:06: [io 0x0440-0x045f] has been reserved [ 5.098559] system 00:06: [io 0x0460-0x047f] has been reserved [ 5.098562] system 00:06: [io 0x0480-0x048f] has been reserved [ 5.098565] system 00:06: [io 0xf800-0xf81f] could not be reserved [ 5.098567] system 00:06: [io 0xf820-0xf83f] has been reserved [ 5.098570] system 00:06: [io 0xf840-0xf85f] has been reserved [ 5.098572] system 00:06: [io 0xf860-0xf87f] has been reserved [ 5.098574] system 00:06: [io 0xfa00-0xfa3f] has been reserved [ 5.098576] system 00:06: [io 0xfc00-0xfc7f] has been reserved [ 5.098578] system 00:06: [io 0xfc80-0xfcff] has been reserved [ 5.098579] system 00:06: [io 0xfe00-0xfe7f] has been reserved [ 5.098581] system 00:06: [io 0xfe80-0xfeff] has been reserved [ 5.098584] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 5.098645] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 5.098648] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 5.099089] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved [ 5.099092] system 00:08: [mem 0x00100000-0xefffffff] could not be reserved [ 5.099094] system 00:08: [mem 0x000e8000-0x000fffff] could not be reserved [ 5.099096] system 00:08: [mem 0xfec01000-0xfecfffff] could not be reserved [ 5.099099] system 00:08: [mem 0xfed00000-0xfed3ffff] could not be reserved [ 5.099101] system 00:08: [mem 0xfed45000-0xffffffff] has been reserved [ 5.099103] system 00:08: [mem 0xf0000000-0xf3ffffff] has been reserved [ 5.099105] system 00:08: [mem 0x000d4000-0x000e7fff] could not be reserved [ 5.099108] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active) [ 5.099116] pnp: PnP ACPI: found 9 devices [ 5.108785] PM-Timer failed consistency check (0xffffff) - aborting. [ 5.108985] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 1c] add_size 1000 [ 5.108988] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 1c] add_size 200000 add_align 100000 [ 5.108991] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 1c] add_size 200000 add_align 100000 [ 5.109005] pci 0000:00:1c.5: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000 [ 5.109008] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000 [ 5.109040] pci 0000:00:1f.0: BAR 13: [io size 0x0080] has bogus alignment [ 5.109042] pci 0000:00:1f.0: BAR 14: [io size 0x0040] has bogus alignment [ 5.109045] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000 [ 5.109047] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000 [ 5.109049] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 5.109051] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 5.109053] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 5.109055] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 5.109057] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000 [ 5.109059] pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000 [ 5.109061] pci 0000:00:1c.5: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000 [ 5.109063] pci 0000:00:1c.5: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000 [ 5.109068] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf8300000-0xf84fffff] [ 5.109072] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf8500000-0xf86fffff 64bit pref] [ 5.109076] pci 0000:00:1c.5: BAR 15: assigned [mem 0xf8700000-0xf88fffff 64bit pref] [ 5.109079] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] [ 5.109082] pci 0000:00:1c.5: BAR 13: assigned [io 0x2000-0x2fff] [ 5.109085] pci 0000:00:01.0: PCI bridge to [bus 03] [ 5.109104] pci 0000:10:02.0: PCI bridge to [bus 11] [ 5.109128] pci 0000:12:00.0: BAR 6: assigned [mem 0xf9210000-0xf921ffff pref] [ 5.109130] pci 0000:10:03.0: PCI bridge to [bus 12] [ 5.109134] pci 0000:10:03.0: bridge window [io 0xc000-0xcfff] [ 5.109143] pci 0000:10:03.0: bridge window [mem 0xf9200000-0xf92fffff] [ 5.109159] pci 0000:10:04.0: PCI bridge to [bus 13] [ 5.109168] pci 0000:10:04.0: bridge window [mem 0xf9000000-0xf90fffff] [ 5.109184] pci 0000:10:05.0: PCI bridge to [bus 14] [ 5.109193] pci 0000:10:05.0: bridge window [mem 0xf9100000-0xf91fffff] [ 5.109209] pci 0000:0f:00.0: PCI bridge to [bus 10-14] [ 5.109213] pci 0000:0f:00.0: bridge window [io 0xc000-0xcfff] [ 5.109222] pci 0000:0f:00.0: bridge window [mem 0xf9000000-0xf92fffff] [ 5.109239] pci 0000:00:03.0: PCI bridge to [bus 0f-14] [ 5.109242] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff] [ 5.109249] pci 0000:00:03.0: bridge window [mem 0xf9000000-0xf92fffff] [ 5.109262] pci 0000:29:02.0: PCI bridge to [bus 2a] [ 5.109286] pci 0000:2b:00.0: BAR 6: assigned [mem 0xf8210000-0xf821ffff pref] [ 5.109287] pci 0000:29:03.0: PCI bridge to [bus 2b] [ 5.109292] pci 0000:29:03.0: bridge window [io 0xd000-0xdfff] [ 5.109301] pci 0000:29:03.0: bridge window [mem 0xf8200000-0xf82fffff] [ 5.109317] pci 0000:29:04.0: PCI bridge to [bus 2c] [ 5.109326] pci 0000:29:04.0: bridge window [mem 0xf8000000-0xf80fffff] [ 5.109342] pci 0000:29:05.0: PCI bridge to [bus 2d] [ 5.109350] pci 0000:29:05.0: bridge window [mem 0xf8100000-0xf81fffff] [ 5.109366] pci 0000:28:00.0: PCI bridge to [bus 29-2d] [ 5.109370] pci 0000:28:00.0: bridge window [io 0xd000-0xdfff] [ 5.109379] pci 0000:28:00.0: bridge window [mem 0xf8000000-0xf82fffff] [ 5.109396] pci 0000:00:07.0: PCI bridge to [bus 28-2d] [ 5.109399] pci 0000:00:07.0: bridge window [io 0xd000-0xdfff] [ 5.109414] pci 0000:00:07.0: bridge window [mem 0xf8000000-0xf82fffff] [ 5.109426] pci 0000:00:1c.0: PCI bridge to [bus 1c] [ 5.109430] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 5.109438] pci 0000:00:1c.0: bridge window [mem 0xf8300000-0xf84fffff] [ 5.109443] pci 0000:00:1c.0: bridge window [mem 0xf8500000-0xf86fffff 64bit pref] [ 5.109453] pci 0000:00:1c.5: PCI bridge to [bus 01] [ 5.109457] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff] [ 5.109464] pci 0000:00:1c.5: bridge window [mem 0xfb000000-0xfb0fffff] [ 5.109470] pci 0000:00:1c.5: bridge window [mem 0xf8700000-0xf88fffff 64bit pref] [ 5.109481] pci 0000:37:09.0: BAR 6: assigned [mem 0xfd020000-0xfd03ffff pref] [ 5.109482] pci 0000:00:1e.0: PCI bridge to [bus 37] [ 5.109486] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff] [ 5.109494] pci 0000:00:1e.0: bridge window [mem 0xfc000000-0xfd0fffff] [ 5.109508] pci_bus 0000:00: resource 4 [mem 0x000a0000-0x000bffff window] [ 5.109510] pci_bus 0000:00: resource 5 [mem 0xf8000000-0xfdffffff window] [ 5.109512] pci_bus 0000:00: resource 6 [mem 0xfed00000-0xfed003ff window] [ 5.109514] pci_bus 0000:00: resource 7 [mem 0xfed40000-0xfed44fff window] [ 5.109515] pci_bus 0000:00: resource 8 [io 0x0000-0x03af window] [ 5.109517] pci_bus 0000:00: resource 9 [io 0x03b0-0x03df window] [ 5.109519] pci_bus 0000:00: resource 10 [io 0x03e0-0x0cf7 window] [ 5.109521] pci_bus 0000:00: resource 11 [io 0x0d00-0x0fff window] [ 5.109522] pci_bus 0000:00: resource 12 [io 0x1000-0xefff window] [ 5.109524] pci_bus 0000:0f: resource 0 [io 0xc000-0xcfff] [ 5.109526] pci_bus 0000:0f: resource 1 [mem 0xf9000000-0xf92fffff] [ 5.109528] pci_bus 0000:10: resource 0 [io 0xc000-0xcfff] [ 5.109530] pci_bus 0000:10: resource 1 [mem 0xf9000000-0xf92fffff] [ 5.109532] pci_bus 0000:12: resource 0 [io 0xc000-0xcfff] [ 5.109534] pci_bus 0000:12: resource 1 [mem 0xf9200000-0xf92fffff] [ 5.109535] pci_bus 0000:13: resource 1 [mem 0xf9000000-0xf90fffff] [ 5.109537] pci_bus 0000:14: resource 1 [mem 0xf9100000-0xf91fffff] [ 5.109539] pci_bus 0000:28: resource 0 [io 0xd000-0xdfff] [ 5.109541] pci_bus 0000:28: resource 1 [mem 0xf8000000-0xf82fffff] [ 5.109543] pci_bus 0000:29: resource 0 [io 0xd000-0xdfff] [ 5.109544] pci_bus 0000:29: resource 1 [mem 0xf8000000-0xf82fffff] [ 5.109546] pci_bus 0000:2b: resource 0 [io 0xd000-0xdfff] [ 5.109548] pci_bus 0000:2b: resource 1 [mem 0xf8200000-0xf82fffff] [ 5.109550] pci_bus 0000:2c: resource 1 [mem 0xf8000000-0xf80fffff] [ 5.109551] pci_bus 0000:2d: resource 1 [mem 0xf8100000-0xf81fffff] [ 5.109553] pci_bus 0000:1c: resource 0 [io 0x1000-0x1fff] [ 5.109555] pci_bus 0000:1c: resource 1 [mem 0xf8300000-0xf84fffff] [ 5.109557] pci_bus 0000:1c: resource 2 [mem 0xf8500000-0xf86fffff 64bit pref] [ 5.109558] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 5.109560] pci_bus 0000:01: resource 1 [mem 0xfb000000-0xfb0fffff] [ 5.109562] pci_bus 0000:01: resource 2 [mem 0xf8700000-0xf88fffff 64bit pref] [ 5.109564] pci_bus 0000:37: resource 0 [io 0xe000-0xefff] [ 5.109565] pci_bus 0000:37: resource 1 [mem 0xfc000000-0xfd0fffff] [ 5.109567] pci_bus 0000:37: resource 4 [mem 0x000a0000-0x000bffff window] [ 5.109569] pci_bus 0000:37: resource 5 [mem 0xf8000000-0xfdffffff window] [ 5.109571] pci_bus 0000:37: resource 6 [mem 0xfed00000-0xfed003ff window] [ 5.109572] pci_bus 0000:37: resource 7 [mem 0xfed40000-0xfed44fff window] [ 5.109574] pci_bus 0000:37: resource 8 [io 0x0000-0x03af window] [ 5.109576] pci_bus 0000:37: resource 9 [io 0x03b0-0x03df window] [ 5.109578] pci_bus 0000:37: resource 10 [io 0x03e0-0x0cf7 window] [ 5.109579] pci_bus 0000:37: resource 11 [io 0x0d00-0x0fff window] [ 5.109581] pci_bus 0000:37: resource 12 [io 0x1000-0xefff window] [ 5.109623] NET: Registered protocol family 2 [ 5.109912] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 5.109983] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 5.110034] TCP: Hash tables configured (established 16384 bind 16384) [ 5.110077] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 5.110090] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 5.110183] NET: Registered protocol family 1 [ 5.110335] xen: registering gsi 20 triggering 0 polarity 1 [ 5.110358] xen: --> pirq=20 -> irq=20 (gsi=20) [ 5.110600] xen: registering gsi 21 triggering 0 polarity 1 [ 5.110609] xen: --> pirq=21 -> irq=21 (gsi=21) [ 5.110830] xen: registering gsi 22 triggering 0 polarity 1 [ 5.110838] xen: --> pirq=22 -> irq=22 (gsi=22) [ 5.111060] xen: registering gsi 22 triggering 0 polarity 1 [ 5.111063] Already setup the GSI :22 [ 5.111294] xen: registering gsi 20 triggering 0 polarity 1 [ 5.111297] Already setup the GSI :20 [ 5.111531] xen: registering gsi 21 triggering 0 polarity 1 [ 5.111534] Already setup the GSI :21 [ 5.111750] xen: registering gsi 22 triggering 0 polarity 1 [ 5.111752] Already setup the GSI :22 [ 5.111970] xen: registering gsi 20 triggering 0 polarity 1 [ 5.111973] Already setup the GSI :20 [ 5.112165] pci 0000:37:09.0: Video device with shadowed ROM [ 5.112271] PCI: CLS 64 bytes, default 64 [ 5.112332] Trying to unpack rootfs image as initramfs... [ 5.665740] Freeing initrd memory: 38152K (ffff880004000000 - ffff880006542000) [ 5.666492] FEATURE SPEC_CTRL Not Present [ 5.666494] FEATURE IBPB Not Present [ 5.666601] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 5.668728] futex hash table entries: 8192 (order: 7, 524288 bytes) [ 5.668805] Initialise system trusted keyring [ 5.668834] audit: initializing netlink subsys (disabled) [ 5.668861] audit: type=2000 audit(1583592186.227:1): initialized [ 5.670647] page_owner is disabled [ 5.670658] zpool: loaded [ 5.670660] zbud: loaded [ 5.671010] VFS: Disk quotas dquot_6.6.0 [ 5.671050] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 5.671082] hugetlbfs: disabling because there are no supported hugepage sizes [ 5.671182] Key type big_key registered [ 5.671185] SELinux: Registering netfilter hooks [ 5.673733] alg: No test for stdrng (krng) [ 5.673753] Key type asymmetric registered [ 5.673756] Asymmetric key parser 'x509' registered [ 5.673778] bounce: pool size: 64 pages [ 5.673788] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 5.673936] io scheduler noop registered [ 5.673939] io scheduler deadline registered (default) [ 5.673974] io scheduler cfq registered [ 5.674594] xen: registering gsi 21 triggering 0 polarity 1 [ 5.674606] Already setup the GSI :21 [ 5.676153] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 5.676169] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 5.676202] intel_idle: MWAIT substates: 0x1120 [ 5.676204] intel_idle: v0.4.1 model 0x2C [ 5.676210] intel_idle: intel_idle yielding to none [ 5.676287] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 5.676291] ACPI: Power Button [PBTN] [ 5.676322] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 5.676324] ACPI: Power Button [PWRF] [ 5.676531] Monitor-Mwait will be used to enter C-1 state [ 5.676557] Monitor-Mwait will be used to enter C-2 state [ 5.676577] Monitor-Mwait will be used to enter C-3 state [ 5.680626] Warning: Processor Platform Limit not supported. [ 5.680822] GHES: HEST is not enabled! [ 5.681024] xen_pciback: backend is vpci [ 5.683518] xen_acpi_processor: Uploading Xen processor PM info [ 5.684935] ACPI: Format specifies more objects [5] than exist in package [1]. [ 5.684936] xen_acpi_processor: Invalid _PSD data [ 5.685037] ACPI: Format specifies more objects [5] than exist in package [1]. [ 5.685038] xen_acpi_processor: Invalid _PSD data [ 5.685135] ACPI: Format specifies more objects [5] than exist in package [1]. [ 5.685136] xen_acpi_processor: Invalid _PSD data [ 5.685233] ACPI: Format specifies more objects [5] than exist in package [1]. [ 5.685234] xen_acpi_processor: Invalid _PSD data [ 5.685875] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 5.686455] hpet_acpi_add: no address or irqs in _CRS [ 5.686519] Non-volatile memory driver v1.3 [ 5.686563] Linux agpgart interface v0.103 [ 5.716458] tpm_tis 00:04: 1.2 TPM (device-id 0xB, rev-id 16) [ 5.867373] AMD IOMMUv2 driver by Joerg Roedel [ 5.867375] AMD IOMMUv2 functionality not available on this system [ 5.871067] brd: module loaded [ 5.872518] loop: module loaded [ 5.872621] libphy: Fixed MDIO Bus: probed [ 5.872627] MST:: : mst_init 896: Mellanox Technologies Software Tools Driver - version 2.0.0 [ 5.872686] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.872691] ehci-pci: EHCI PCI platform driver [ 5.872813] xen: registering gsi 22 triggering 0 polarity 1 [ 5.872817] Already setup the GSI :22 [ 5.872864] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 5.872920] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 5.872938] ehci-pci 0000:00:1a.7: debug port 1 [ 5.876868] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported [ 5.876890] ehci-pci 0000:00:1a.7: irq 22, io mem 0xfa004800 [ 5.882433] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 5.882499] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 5.882501] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.882503] usb usb1: Product: EHCI Host Controller [ 5.882506] usb usb1: Manufacturer: Linux 4.1.12-124.21.1.el6uek.x86_64 ehci_hcd [ 5.882508] usb usb1: SerialNumber: 0000:00:1a.7 [ 5.882627] hub 1-0:1.0: USB hub found [ 5.882636] hub 1-0:1.0: 6 ports detected [ 5.882871] xen: registering gsi 20 triggering 0 polarity 1 [ 5.882875] Already setup the GSI :20 [ 5.882910] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 5.882964] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 5.882982] ehci-pci 0000:00:1d.7: debug port 1 [ 5.886908] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported [ 5.886927] ehci-pci 0000:00:1d.7: irq 20, io mem 0xfa004c00 [ 5.892433] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 5.892489] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 5.892491] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.892493] usb usb2: Product: EHCI Host Controller [ 5.892495] usb usb2: Manufacturer: Linux 4.1.12-124.21.1.el6uek.x86_64 ehci_hcd [ 5.892496] usb usb2: SerialNumber: 0000:00:1d.7 [ 5.892600] hub 2-0:1.0: USB hub found [ 5.892607] hub 2-0:1.0: 6 ports detected [ 5.892737] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 5.892743] ohci-pci: OHCI PCI platform driver [ 5.892759] uhci_hcd: USB Universal Host Controller Interface driver [ 5.892877] xen: registering gsi 20 triggering 0 polarity 1 [ 5.892881] Already setup the GSI :20 [ 5.892898] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 5.892953] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 5.892962] uhci_hcd 0000:00:1a.0: detected 2 ports [ 5.892989] uhci_hcd 0000:00:1a.0: irq 20, io base 0x0000b000 [ 5.893064] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.893066] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.893068] usb usb3: Product: UHCI Host Controller [ 5.893069] usb usb3: Manufacturer: Linux 4.1.12-124.21.1.el6uek.x86_64 uhci_hcd [ 5.893071] usb usb3: SerialNumber: 0000:00:1a.0 [ 5.893172] hub 3-0:1.0: USB hub found [ 5.893180] hub 3-0:1.0: 2 ports detected [ 5.893366] xen: registering gsi 21 triggering 0 polarity 1 [ 5.893370] Already setup the GSI :21 [ 5.893387] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 5.893459] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 5.893468] uhci_hcd 0000:00:1a.1: detected 2 ports [ 5.893508] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b020 [ 5.893581] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.893583] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.893585] usb usb4: Product: UHCI Host Controller [ 5.893587] usb usb4: Manufacturer: Linux 4.1.12-124.21.1.el6uek.x86_64 uhci_hcd [ 5.893589] usb usb4: SerialNumber: 0000:00:1a.1 [ 5.893696] hub 4-0:1.0: USB hub found [ 5.893703] hub 4-0:1.0: 2 ports detected [ 5.893893] xen: registering gsi 22 triggering 0 polarity 1 [ 5.893897] Already setup the GSI :22 [ 5.893914] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 5.893969] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 5.893978] uhci_hcd 0000:00:1a.2: detected 2 ports [ 5.894004] uhci_hcd 0000:00:1a.2: irq 22, io base 0x0000b040 [ 5.894077] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.894079] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.894081] usb usb5: Product: UHCI Host Controller [ 5.894083] usb usb5: Manufacturer: Linux 4.1.12-124.21.1.el6uek.x86_64 uhci_hcd [ 5.894084] usb usb5: SerialNumber: 0000:00:1a.2 [ 5.894187] hub 5-0:1.0: USB hub found [ 5.894194] hub 5-0:1.0: 2 ports detected [ 5.894383] xen: registering gsi 20 triggering 0 polarity 1 [ 5.894388] Already setup the GSI :20 [ 5.894416] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 5.894469] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 5.894478] uhci_hcd 0000:00:1d.0: detected 2 ports [ 5.894504] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000b060 [ 5.894578] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.894580] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.894582] usb usb6: Product: UHCI Host Controller [ 5.894584] usb usb6: Manufacturer: Linux 4.1.12-124.21.1.el6uek.x86_64 uhci_hcd [ 5.894585] usb usb6: SerialNumber: 0000:00:1d.0 [ 5.894685] hub 6-0:1.0: USB hub found [ 5.894692] hub 6-0:1.0: 2 ports detected [ 5.894882] xen: registering gsi 21 triggering 0 polarity 1 [ 5.894886] Already setup the GSI :21 [ 5.894903] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 5.894955] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 5.894964] uhci_hcd 0000:00:1d.1: detected 2 ports [ 5.894990] uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000b080 [ 5.895064] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.895066] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.895068] usb usb7: Product: UHCI Host Controller [ 5.895069] usb usb7: Manufacturer: Linux 4.1.12-124.21.1.el6uek.x86_64 uhci_hcd [ 5.895071] usb usb7: SerialNumber: 0000:00:1d.1 [ 5.895172] hub 7-0:1.0: USB hub found [ 5.895179] hub 7-0:1.0: 2 ports detected [ 5.895371] xen: registering gsi 22 triggering 0 polarity 1 [ 5.895375] Already setup the GSI :22 [ 5.895394] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 5.895457] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 5.895466] uhci_hcd 0000:00:1d.2: detected 2 ports [ 5.895493] uhci_hcd 0000:00:1d.2: irq 22, io base 0x0000b0a0 [ 5.895567] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.895569] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.895570] usb usb8: Product: UHCI Host Controller [ 5.895572] usb usb8: Manufacturer: Linux 4.1.12-124.21.1.el6uek.x86_64 uhci_hcd [ 5.895574] usb usb8: SerialNumber: 0000:00:1d.2 [ 5.895673] hub 8-0:1.0: USB hub found [ 5.895680] hub 8-0:1.0: 2 ports detected [ 5.895813] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 [ 5.898461] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 5.898467] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 5.898558] mousedev: PS/2 mouse device common for all mice [ 5.898847] rtc_cmos 00:00: RTC can wake from S4 [ 5.899054] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 [ 5.899094] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram [ 5.899349] hidraw: raw HID events driver (C) Jiri Kosina [ 5.899547] usbcore: registered new interface driver usbhid [ 5.899549] usbhid: USB HID core driver [ 5.899615] drop_monitor: Initializing network drop monitor service [ 5.899689] gre: GRE over IPv4 demultiplexor driver [ 5.899698] Initializing XFRM netlink socket [ 5.899704] NET: Registered protocol family 17 [ 5.900144] mce: Unable to init device /dev/mcelog (rc: -16) [ 5.900580] Loading compiled-in X.509 certificates [ 5.901438] Loaded X.509 cert 'Oracle America, Inc.: Ksplice Kernel Module Signing Key: 09010ebef5545fa7c54b626ef518e077b5b1ee4c' [ 5.902274] Loaded X.509 cert 'Oracle Linux Kernel Module Signing Key: 2bb352412969a3653f0eb6021763408ebb9bb5ab' [ 5.903113] Loaded X.509 cert 'Oracle CA Server: b59275a22dae18b9ab5f7ac4c816fab6c5f0bf9b' [ 5.903128] registered taskstats version 1 [ 6.184431] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 6.281503] rtc_cmos 00:00: setting system clock to 2020-03-07 14:43:06 UTC (1583592186) [ 6.282426] Freeing unused kernel memory: 1988K (ffffffff81c6d000 - ffffffff81e5e000) [ 6.302590] usb 1-1: New USB device found, idVendor=0781, idProduct=5583 [ 6.302593] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 6.302595] usb 1-1: Product: Ultra Fit [ 6.302597] usb 1-1: Manufacturer: SanDisk [ 6.302598] usb 1-1: SerialNumber: 4C530000180630114050 [ 6.308295] dracut: dracut-004-409.0.7.el6_8.2 [ 6.320440] dracut: rd_NO_LUKS: removing cryptoluks activation [ 6.322167] dracut: rd_NO_LVM: removing LVM activation [ 6.349957] device-mapper: uevent: version 1.0.3 [ 6.350048] device-mapper: ioctl: 4.31.0-ioctl (2015-3-12) initialised: dm-devel@redhat.com [ 6.367096] udev: starting version 147 [ 6.466305] wmi: Mapper loaded [ 6.484772] random: nonblocking pool is initialized [ 6.665431] clocksource tsc: mask: 0xffffffffffffffff max_cycles: 0x2c18405b7f4, max_idle_ns: 440795289991 ns [ 7.665593] Switched to clocksource tsc [ 9.526515] floppy0: no floppy controllers found [ 9.619564] dracut: Starting plymouth daemon [ 9.645256] dracut: rd_NO_DM: removing DM RAID activation [ 9.649274] dracut: rd_NO_MD: removing MD RAID activation [ 9.689603] Loading iSCSI transport class v2.0-870. [ 9.700236] iscsi: registered transport (qla4xxx) [ 9.700274] QLogic iSCSI HBA Driver [ 9.722784] IPv6: Loaded, but administratively disabled, reboot required to enable [ 9.725642] libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits. [ 9.725644] libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0. [ 9.727750] Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010) [ 9.727782] iscsi: registered transport (cxgb3i) [ 9.738222] Chelsio T4/T5 iSCSI Driver cxgb4i v0.9.4 [ 9.738250] iscsi: registered transport (cxgb4i) [ 9.742853] cnic: QLogic cnicDriver v2.5.22 (July 20, 2015) [ 9.745507] QLogic NetXtreme II iSCSI Driver bnx2i v2.7.10.1 (Jul 16, 2014) [ 9.745526] iscsi: registered transport (bnx2i) [ 9.749790] ahci 0000:00:1f.2: version 3.0 [ 9.749933] xen: registering gsi 18 triggering 0 polarity 1 [ 9.749960] xen: --> pirq=18 -> irq=18 (gsi=18) [ 9.749996] ahci 0000:00:1f.2: controller can't do SNTF, turning off CAP_SNTF [ 9.750133] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl RAID mode [ 9.750138] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pmp pio slum part ccc sxs [ 9.750892] scsi host0: ahci [ 9.751108] scsi host1: ahci [ 9.751133] iscsi: registered transport (be2iscsi) [ 9.751135] In beiscsi_module_init, tt=ffffffffa0280100 [ 9.751269] scsi host2: ahci [ 9.751425] scsi host3: ahci [ 9.751541] scsi host4: ahci [ 9.751665] scsi host5: ahci [ 9.751707] ata1: SATA max UDMA/133 abar m2048@0xfa004000 port 0xfa004100 irq 202 [ 9.751709] ata2: SATA max UDMA/133 abar m2048@0xfa004000 port 0xfa004180 irq 202 [ 9.751711] ata3: SATA max UDMA/133 abar m2048@0xfa004000 port 0xfa004200 irq 202 [ 9.751713] ata4: SATA max UDMA/133 abar m2048@0xfa004000 port 0xfa004280 irq 202 [ 9.751715] ata5: SATA max UDMA/133 abar m2048@0xfa004000 port 0xfa004300 irq 202 [ 9.751717] ata6: SATA max UDMA/133 abar m2048@0xfa004000 port 0xfa004380 irq 202 [ 9.751785] xen: registering gsi 36 triggering 0 polarity 1 [ 9.751799] xen: --> pirq=36 -> irq=36 (gsi=36) [ 9.762500] ahci 0000:12:00.0: AHCI 0001.0000 32 slots 4 ports 6 Gbps 0xf impl SATA mode [ 9.762504] ahci 0000:12:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs [ 9.763060] scsi host6: ahci [ 9.763243] scsi host7: ahci [ 9.763471] scsi host8: ahci [ 9.763642] scsi host9: ahci [ 9.763718] ata7: SATA max UDMA/133 abar m2048@0xf9200000 port 0xf9200100 irq 203 [ 9.763721] ata8: SATA max UDMA/133 abar m2048@0xf9200000 port 0xf9200180 irq 203 [ 9.763723] ata9: SATA max UDMA/133 abar m2048@0xf9200000 port 0xf9200200 irq 203 [ 9.763725] ata10: SATA max UDMA/133 abar m2048@0xf9200000 port 0xf9200280 irq 203 [ 9.763793] xen: registering gsi 38 triggering 0 polarity 1 [ 9.763806] xen: --> pirq=38 -> irq=38 (gsi=38) [ 9.774507] ahci 0000:2b:00.0: AHCI 0001.0000 32 slots 4 ports 6 Gbps 0xf impl SATA mode [ 9.774516] ahci 0000:2b:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs [ 9.775051] scsi host10: ahci [ 9.775241] scsi host11: ahci [ 9.775423] scsi host12: ahci [ 9.775616] scsi host13: ahci [ 9.775660] ata11: SATA max UDMA/133 abar m2048@0xf8200000 port 0xf8200100 irq 204 [ 9.775663] ata12: SATA max UDMA/133 abar m2048@0xf8200000 port 0xf8200180 irq 204 [ 9.775665] ata13: SATA max UDMA/133 abar m2048@0xf8200000 port 0xf8200200 irq 204 [ 9.775667] ata14: SATA max UDMA/133 abar m2048@0xf8200000 port 0xf8200280 irq 204 [ 10.056520] ata4: SATA link down (SStatus 0 SControl 300) [ 10.056560] ata5: SATA link down (SStatus 0 SControl 300) [ 10.056579] ata3: SATA link down (SStatus 0 SControl 300) [ 10.056597] ata6: SATA link down (SStatus 0 SControl 300) [ 10.056614] ata2: SATA link down (SStatus 0 SControl 300) [ 10.068514] ata10: SATA link down (SStatus 0 SControl 300) [ 10.068544] ata9: SATA link down (SStatus 0 SControl 300) [ 10.068568] ata7: SATA link down (SStatus 0 SControl 300) [ 10.068591] ata8: SATA link down (SStatus 0 SControl 300) [ 10.080512] ata14: SATA link down (SStatus 0 SControl 300) [ 10.080543] ata12: SATA link down (SStatus 0 SControl 300) [ 10.080566] ata13: SATA link down (SStatus 0 SControl 300) [ 10.080588] ata11: SATA link down (SStatus 0 SControl 300) [ 10.211525] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 10.214364] ata1.00: ATAPI: HL-DT-ST BD-RE WH16NS40, 1.00, max UDMA/100 [ 10.215163] ata1.00: configured for UDMA/100 [ 10.219788] scsi 0:0:0:0: CD-ROM HL-DT-ST BD-RE WH16NS40 1.00 PQ: 0 ANSI: 5 [ 10.244598] nvme nvme0: pci function 0000:13:00.0 [ 10.244664] nvme nvme1: pci function 0000:14:00.0 [ 10.244680] xen: registering gsi 24 triggering 0 polarity 1 [ 10.244702] xen: --> pirq=24 -> irq=24 (gsi=24) [ 10.244728] xen: registering gsi 34 triggering 0 polarity 1 [ 10.244732] nvme nvme2: pci function 0000:2c:00.0 [ 10.244741] xen: --> pirq=34 -> irq=34 (gsi=34) [ 10.244809] xen: registering gsi 30 triggering 0 polarity 1 [ 10.244928] xen: --> pirq=30 -> irq=30 (gsi=30) [ 10.244936] nvme nvme3: pci function 0000:2d:00.0 [ 10.245050] xen: registering gsi 37 triggering 0 polarity 1 [ 10.245156] xen: --> pirq=37 -> irq=37 (gsi=37) [ 10.277770] pps_core: LinuxPPS API ver. 1 registered [ 10.277772] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 10.279315] PTP clock support registered [ 10.282959] tg3.c:v3.137 (May 11, 2014) [ 10.283018] xen: registering gsi 17 triggering 0 polarity 1 [ 10.283035] xen: --> pirq=17 -> irq=17 (gsi=17) [ 10.307112] tg3 0000:01:00.0 eth0: Tigon3 [partno(BCM95754) rev 5784100] (PCI Express) MAC address 24:be:05:03:fa:14 [ 10.307115] tg3 0000:01:00.0 eth0: attached PHY is 5784 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) [ 10.307118] tg3 0000:01:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 10.307120] tg3 0000:01:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 10.335516] usb-storage 1-1:1.0: USB Mass Storage device detected [ 10.335735] scsi host14: usb-storage 1-1:1.0 [ 10.335800] usbcore: registered new interface driver usb-storage [ 10.349361] nvme1n1: p1 [ 10.349636] nvme2n1: p1 [ 10.350086] nvme3n1: p1 [ 10.350121] nvme0n1: p1 [ 10.502361] xen: registering gsi 19 triggering 0 polarity 1 [ 10.502387] xen: --> pirq=19 -> irq=19 (gsi=19) [ 10.553566] firewire_ohci 0000:37:05.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0 [ 10.585165] sr 0:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 10.585170] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 10.585316] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 11.053625] firewire_core 0000:37:05.0: created device fw0: GUID 0060b000008e2676, S400 [ 11.337005] scsi 14:0:0:0: Direct-Access SanDisk Ultra Fit 1.00 PQ: 0 ANSI: 6 [ 13.646644] floppy0: no floppy controllers found [ 13.676613] sd 14:0:0:0: [sda] 60063744 512-byte logical blocks: (30.7 GB/28.6 GiB) [ 13.687730] sd 14:0:0:0: [sda] Write Protect is off [ 13.687735] sd 14:0:0:0: [sda] Mode Sense: 43 00 00 00 [ 13.690856] sd 14:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 13.708971] sda: sda1 sda2 sda3 [ 13.712365] sd 14:0:0:0: [sda] Attached SCSI removable disk [ 14.182357] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 14.204302] dracut: Mounted root filesystem /dev/sda2 [ 14.462726] SELinux: Disabled at runtime. [ 14.462747] SELinux: Unregistering netfilter hooks [ 14.489632] audit: type=1404 audit(1583592194.707:2): selinux=0 auid=4294967295 ses=4294967295 [ 14.496008] dracut: [ 14.681514] dracut: Switching root [ 15.396793] udev: starting version 147 [ 16.817752] EDAC MC: Ver: 3.0.0 [ 16.822611] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:3f:03.0 (POLLED) [ 16.822646] EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:3f:03.0 (POLLED) [ 16.822930] EDAC MC1: Giving out device to module i7core_edac.c controller i7 core #1: DEV 0000:3e:03.0 (POLLED) [ 16.822947] EDAC PCI1: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:3e:03.0 (POLLED) [ 16.823076] EDAC i7core: Driver loaded, 2 memory controller(s) found. [ 16.985573] xen: registering gsi 21 triggering 0 polarity 1 [ 16.985586] Already setup the GSI :21 [ 17.018259] snd_hda_codec_realtek hdaudioC0D0: ALC262: SKU not ready 0x411111f0 [ 17.018671] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC262: line_outs=1 (0x15/0x0/0x0/0x0/0x0) type:line [ 17.018674] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=1 (0x16/0x0/0x0/0x0/0x0) [ 17.018676] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 17.018678] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 17.018679] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 17.018682] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 17.018684] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 17.018686] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 17.029132] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5 [ 17.029499] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 17.029580] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 17.029632] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 17.029649] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 17.029709] sd 14:0:0:0: Attached scsi generic sg1 type 0 [ 17.029727] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 17.029837] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 17.186133] input: PC Speaker as /devices/platform/pcspkr/input/input11 [ 17.286531] input: HP WMI hotkeys as /devices/virtual/input/input12 [ 17.351796] iTCO_vendor_support: vendor-support=0 [ 17.358002] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 17.358024] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS [ 17.498741] parport_pc parport_pc.956: Unable to set coherent dma mask: disabling DMA [ 17.498801] parport_pc parport_pc.888: Unable to set coherent dma mask: disabling DMA [ 17.498865] parport_pc parport_pc.632: Unable to set coherent dma mask: disabling DMA [ 20.543782] floppy0: no floppy controllers found [ 20.582920] ppdev: user-space parallel port driver [ 20.663487] device-mapper: multipath: version 1.9.0 loaded [ 21.041846] EXT4-fs (sda2): re-mounted. Opts: (null) [ 21.209410] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 21.446547] Adding 5903356k swap on /dev/sda3. Priority:-1 extents:1 across:5903356k FS [ 25.415566] tg3 0000:01:00.0 eth0: Link is up at 1000 Mbps, full duplex [ 25.415570] tg3 0000:01:00.0 eth0: Flow control is on for TX and on for RX [ 31.179098] audit: type=1305 audit(1583613811.396:3): audit_pid=2047 old=0 auid=4294967295 ses=4294967295 res=1 [ 32.636860] RPC: Registered named UNIX socket transport module. [ 32.636863] RPC: Registered udp transport module. [ 32.636864] RPC: Registered tcp transport module. [ 32.636865] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 32.887283] bnx2fc: QLogic FCoE Driver bnx2fc v2.10.3 (October 15, 2015) [ 34.262792] xen:xen_evtchn: Event-channel device installed [ 86.031597] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 975.656333] nvme nvme0: I/O 1 QID 4 timeout, aborting [ 975.656347] nvme nvme0: I/O 2 QID 4 timeout, aborting [ 975.656353] nvme nvme0: I/O 3 QID 4 timeout, aborting [ 975.656358] nvme nvme0: I/O 4 QID 4 timeout, aborting [ 1005.657048] nvme nvme0: I/O 1 QID 4 timeout, reset controller [ 1035.657751] nvme nvme0: I/O 1 QID 0 timeout, reset controller [ 1065.759867] nvme nvme0: completing aborted command with status: 0007 [ 1065.759872] blk_update_request: I/O error, dev nvme0n1, sector 16 [ 1065.759996] Buffer I/O error on dev nvme0n1, logical block 2, lost async page write [ 1065.760231] nvme nvme0: completing aborted command with status: 0007 [ 1065.760233] blk_update_request: I/O error, dev nvme0n1, sector 4000797336 [ 1065.760355] Buffer I/O error on dev nvme0n1, logical block 500099667, lost async page write [ 1065.760601] nvme nvme0: completing aborted command with status: 0007 [ 1065.760603] blk_update_request: I/O error, dev nvme0n1, sector 4000797344 [ 1065.760724] Buffer I/O error on dev nvme0n1, logical block 500099668, lost async page write [ 1065.760953] nvme nvme0: completing aborted command with status: 0007 [ 1065.760955] blk_update_request: I/O error, dev nvme0n1, sector 4000797352 [ 1065.761077] Buffer I/O error on dev nvme0n1, logical block 500099669, lost async page write [ 1065.761310] nvme nvme0: Abort status: 0x7 [ 1065.761313] nvme nvme0: Abort status: 0x7 [ 1065.761314] nvme nvme0: Abort status: 0x7 [ 1065.761325] nvme nvme0: completing aborted command with status: fffffffc [ 1065.761327] blk_update_request: I/O error, dev nvme0n1, sector 8 [ 1065.761383] xen: registering gsi 24 triggering 0 polarity 1 [ 1065.761392] Already setup the GSI :24 [ 1065.761518] Buffer I/O error on dev nvme0n1, logical block 1, lost async page write [ 1065.761926] nvme nvme0: Abort status: 0xfffc [ 1065.862661] nvme 0000:13:00.0: Removing after probe failure [ 1065.862671] nvme0n1: detected capacity change from 2048408248320 to 0 [root@vhost0 ~]# shutdown -h now Broadcast message from root@vhost0.omnitech.net (/dev/pts/2) at 15:06 ... The system is going down for halt NOW! [root@vhost0 ~]# Connection to vhost0 closed by remote host. Connection to vhost0 closed. ✘ ────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────── [2020-03-07 15:06.15] ~ [jdavis.JoshD6860] ➤ ssh vhost0 -l root X11 forwarding request failed on channel 0 Last login: Sat Mar 7 15:00:20 2020 from joshd6860.omnitech.int Warning: making manual modifications in the management domain might cause inconsistencies between Oracle VM Manager and the server. [root@vhost0 ~]# parted /dev/nvme0 nvme0 nvme0n1 [root@vhost0 ~]# parted /dev/nvme0 nvme0 nvme0n1 [root@vhost0 ~]# parted /dev/nvme0n1 GNU Parted 2.1 Using /dev/nvme0n1 Welcome to GNU Parted! Type 'help' to view a list of commands. (parted) p Error: Input/output error during read on /dev/nvme0n1 Retry/Ignore/Cancel? c Error: The primary GPT table is corrupt, but the backup appears OK, so that will be used. OK/Cancel? ok ^C Connection to vhost0 closed. ✘ ────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────── [2020-03-07 15:13.19] ~ [jdavis.JoshD6860] ➤ ssh vhost0 -l root X11 forwarding request failed on channel 0 Last login: Sat Mar 7 15:12:02 2020 from joshd6860.omnitech.int Warning: making manual modifications in the management domain might cause inconsistencies between Oracle VM Manager and the server. [root@vhost0 ~]# parted /dev/nvme1n1 GNU Parted 2.1 Using /dev/nvme1n1 Welcome to GNU Parted! Type 'help' to view a list of commands. (parted) gpt align-check TYPE N check partition N for TYPE(min|opt) alignment check NUMBER do a simple check on the file system cp [FROM-DEVICE] FROM-NUMBER TO-NUMBER copy file system to another partition help [COMMAND] print general help, or help on COMMAND mklabel,mktable LABEL-TYPE create a new disklabel (partition table) mkfs NUMBER FS-TYPE make a FS-TYPE file system on partition NUMBER mkpart PART-TYPE [FS-TYPE] START END make a partition mkpartfs PART-TYPE FS-TYPE START END make a partition with a file system move NUMBER START END move partition NUMBER name NUMBER NAME name partition NUMBER as NAME print [devices|free|list,all|NUMBER] display the partition table, available devices, free space, all found partitions, or a particular partition quit exit program rescue START END rescue a lost partition near START and END resize NUMBER START END resize partition NUMBER and its file system rm NUMBER delete partition NUMBER select DEVICE choose the device to edit set NUMBER FLAG STATE change the FLAG on partition NUMBER toggle [NUMBER [FLAG]] toggle the state of FLAG on partition NUMBER unit UNIT set the default unit to UNIT version display the version number and copyright information of GNU Parted (parted) mklabel gpt Warning: The existing disk label on /dev/nvme1n1 will be destroyed and all data on this disk will be lost. Do you want to continue? Yes/No? yes \ Connection to vhost0 closed. ✘ ────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────── [2020-03-07 15:13.51] ~ [jdavis.JoshD6860] ➤ ssh vhost0 -l root X11 forwarding request failed on channel 0 Last login: Sat Mar 7 15:13:21 2020 from joshd6860.omnitech.int Warning: making manual modifications in the management domain might cause inconsistencies between Oracle VM Manager and the server. [root@vhost0 ~]# parted /dev/nvme2n1 GNU Parted 2.1 Using /dev/nvme2n1 Welcome to GNU Parted! Type 'help' to view a list of commands. (parted) mklabel gpt Warning: The existing disk label on /dev/nvme2n1 will be destroyed and all data on this disk will be lost. Do you want to continue? Yes/No? yes ^C Connection to vhost0 closed. ✘ ────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────── [2020-03-07 15:14.46] ~ [jdavis.JoshD6860] ➤ ssh vhost0 -l root X11 forwarding request failed on channel 0 shLast login: Sat Mar 7 15:13:53 2020 from joshd6860.omnitech.int Warning: making manual modifications in the management domain might cause inconsistencies between Oracle VM Manager and the server. [root@vhost0 ~]# shutdown -h shutdown: time expected Try `shutdown --help' for more information. [root@vhost0 ~]# shutdown -h now Broadcast message from root@vhost0.omnitech.net (/dev/pts/3) at 15:14 ... The system is going down for halt NOW! [root@vhost0 ~]# Connection to vhost0 closed by remote host. Connection to vhost0 closed. ✘ ────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────── [2020-03-07 15:14.57] ~ [jdavis.JoshD6860] ➤ ssh vhost0 -l root X11 forwarding request failed on channel 0 Last login: Sat Mar 7 15:14:49 2020 from joshd6860.omnitech.int Warning: making manual modifications in the management domain might cause inconsistencies between Oracle VM Manager and the server. [root@vhost0 ~]# parted /dev/nvme0n1 GNU Parted 2.1 Using /dev/nvme0n1 Welcome to GNU Parted! Type 'help' to view a list of commands. (parted) mklabel gpt Warning: The existing disk label on /dev/nvme0n1 will be destroyed and all data on this disk will be lost. Do you want to continue? Yes/No? yes (parted) (parted) p Model: Unknown (unknown) Disk /dev/nvme0n1: 2048GB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags (parted) print Model: Unknown (unknown) Disk /dev/nvme0n1: 2048GB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags (parted) n Partition number? 1 Error: Partition doesn't exist. (parted) mkpart primary File system type? [ext2]? raid parted: invalid token: raid File system type? [ext2]? ? parted: invalid token: ? File system type? [ext2]? ^C Error: Expecting a file system type. (parted) ? align-check TYPE N check partition N for TYPE(min|opt) alignment check NUMBER do a simple check on the file system cp [FROM-DEVICE] FROM-NUMBER TO-NUMBER copy file system to another partition help [COMMAND] print general help, or help on COMMAND mklabel,mktable LABEL-TYPE create a new disklabel (partition table) mkfs NUMBER FS-TYPE make a FS-TYPE file system on partition NUMBER mkpart PART-TYPE [FS-TYPE] START END make a partition mkpartfs PART-TYPE FS-TYPE START END make a partition with a file system move NUMBER START END move partition NUMBER name NUMBER NAME name partition NUMBER as NAME print [devices|free|list,all|NUMBER] display the partition table, available devices, free space, all found partitions, or a particular partition quit exit program rescue START END rescue a lost partition near START and END resize NUMBER START END resize partition NUMBER and its file system rm NUMBER delete partition NUMBER select DEVICE choose the device to edit set NUMBER FLAG STATE change the FLAG on partition NUMBER toggle [NUMBER [FLAG]] toggle the state of FLAG on partition NUMBER unit UNIT set the default unit to UNIT version display the version number and copyright information of GNU Parted (parted) mkpart primary 1M -1s Warning: You requested a partition from 1000kB to 2048GB. The closest location we can manage is 1000kB to 2048GB. Is this still acceptable to you? Yes/No? y Warning: The resulting partition is not properly aligned for best performance. Ignore/Cancel? c (parted) mkpart Partition name? []? nvme0 File system type? [ext2]? ^C Error: Expecting a file system type. (parted) mkpart Partition name? []? nvme0n1p1 File system type? [ext2]? mdadm parted: invalid token: mdadm File system type? [ext2]? mdraid parted: invalid token: mdraid File system type? [ext2]? ext4 Start? Start? 0 End? -1s Warning: You requested a partition from 0.00B to 2048GB. The closest location we can manage is 17.4kB to 2048GB. Is this still acceptable to you? Yes/No? y Warning: The resulting partition is not properly aligned for best performance. Ignore/Cancel? c (parted) (parted) ^C (parted) quit Information: You may need to update /etc/fstab. [root@vhost0 ~]# parted -a optimal /dev/nvme0n1 GNU Parted 2.1 Using /dev/nvme0n1 Welcome to GNU Parted! Type 'help' to view a list of commands. (parted) mkpart primary 0% 100% (parted) p Model: Unknown (unknown) Disk /dev/nvme0n1: 2048GB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 2048GB 2048GB primary (parted) q Information: You may need to update /etc/fstab. [root@vhost0 ~]# parted -a optimal /dev/nvme1n1 gpt Usage: parted [OPTION]... [DEVICE [COMMAND [PARAMETERS]...]...] Apply COMMANDs with PARAMETERS to DEVICE. If no COMMAND(s) are given, run in interactive mode. OPTIONs: -h, --help displays this help message -l, --list lists partition layout on all block devices -m, --machine displays machine parseable output -s, --script never prompts for user intervention -v, --version displays the version -a, --align=[none|cyl|min|opt] alignment for new partitions COMMANDs: align-check TYPE N check partition N for TYPE(min|opt) alignment check NUMBER do a simple check on the file system cp [FROM-DEVICE] FROM-NUMBER TO-NUMBER copy file system to another partition help [COMMAND] print general help, or help on COMMAND mklabel,mktable LABEL-TYPE create a new disklabel (partition table) mkfs NUMBER FS-TYPE make a FS-TYPE file system on partition NUMBER mkpart PART-TYPE [FS-TYPE] START END make a partition mkpartfs PART-TYPE FS-TYPE START END make a partition with a file system move NUMBER START END move partition NUMBER name NUMBER NAME name partition NUMBER as NAME print [devices|free|list,all|NUMBER] display the partition table, available devices, free space, all found partitions, or a particular partition quit exit program rescue START END rescue a lost partition near START and END resize NUMBER START END resize partition NUMBER and its file system rm NUMBER delete partition NUMBER select DEVICE choose the device to edit set NUMBER FLAG STATE change the FLAG on partition NUMBER toggle [NUMBER [FLAG]] toggle the state of FLAG on partition NUMBER unit UNIT set the default unit to UNIT version display the version number and copyright information of GNU Parted [root@vhost0 ~]# parted -a optimal /dev/nvme1n1 GNU Parted 2.1 Using /dev/nvme1n1 Welcome to GNU Parted! Type 'help' to view a list of commands. (parted) print Model: Unknown (unknown) Disk /dev/nvme1n1: 2048GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 2048GB 2048GB primary raid (parted) mklabel gpt Warning: The existing disk label on /dev/nvme1n1 will be destroyed and all data on this disk will be lost. Do you want to continue? Yes/No? y (parted) q Information: You may need to update /etc/fstab. [root@vhost0 ~]# parted -a optimal /dev/nvme1n1 mklabel gpt Warning: The existing disk label on /dev/nvme1n1 will be destroyed and all data on this disk will be lost. Do you want to continue? Yes/No? y Information: You may need to update /etc/fstab. [root@vhost0 ~]# parted -a optimal /dev/nvme1n1 mkpart primary 0% 100% Information: You may need to update /etc/fstab. [root@vhost0 ~]# parted -a optimal /dev/nvme2n1 mklabel gpt Warning: The existing disk label on /dev/nvme2n1 will be destroyed and all data on this disk will be lost. Do you want to continue? Yes/No? y Information: You may need to update /etc/fstab. [root@vhost0 ~]# parted -a optimal /dev/nvme2n1 mkpart primary 0% 100% Information: You may need to update /etc/fstab. [root@vhost0 ~]# parted -a optimal /dev/nvme3n1 mklabel gpt Warning: The existing disk label on /dev/nvme3n1 will be destroyed and all data on this disk will be lost. Do you want to continue? Yes/No? y Information: You may need to update /etc/fstab. [root@vhost0 ~]# parted -a optimal /dev/nvme3n1 mkpart primary 0% 100% Information: You may need to update /etc/fstab. [root@vhost0 ~]# parted -a optimal /dev/nvme2n1 print Model: Unknown (unknown) Disk /dev/nvme2n1: 2048GB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 2048GB 2048GB primary [root@vhost0 ~]# for i in 0 1 2 3 ; do > #parted -a optimal /dev/nvme${i}n1 mklabel gpt > #parted -a optimal /dev/nvme${i}n1 mkpart primary 0% 100% > parted -a optimal /dev/nvme${i}n1 set 1 boot off > parted -a optimal /dev/nvme${i}n1 set 1 raid on > parted -a optimal /dev/nvme${i}n1 print > done Information: You may need to update /etc/fstab. Information: You may need to update /etc/fstab. Model: Unknown (unknown) Disk /dev/nvme0n1: 2048GB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 2048GB 2048GB primary raid Information: You may need to update /etc/fstab. Information: You may need to update /etc/fstab. Model: Unknown (unknown) Disk /dev/nvme1n1: 2048GB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 2048GB 2048GB primary raid Information: You may need to update /etc/fstab. Information: You may need to update /etc/fstab. Model: Unknown (unknown) Disk /dev/nvme2n1: 2048GB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 2048GB 2048GB primary raid Information: You may need to update /etc/fstab. Information: You may need to update /etc/fstab. Model: Unknown (unknown) Disk /dev/nvme3n1: 2048GB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 2048GB 2048GB primary raid [root@vhost0 ~]# [root@vhost0 ~]# [root@vhost0 ~]#